sqcomp
10-25-2013, 03:19 AM
To all my YW peeps...
I've started to remove the horn system from my Yaris. It's time for me to move on to my other project car.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/photo-15_zpsdea0d7eb.jpg
This shows the dual 400c compressors, the 150 psi pressure switch, the pressure gauge and the 5 gallon tank.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/IMG_1648_zps36b638f4.jpg
This is the cleaned up pic as it sits in the car now.
I've already removed the horns, manifold and the 12v solenoid from the front end of the car.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/IMG_1500_zps7ba5ecd9.jpg
This is how it sat on the car (without the front clip)
This following clip is my test of the horn:
http://www.youtube.com/watch?v=YuKjZVsDNVY
I'm selling everything to make the kit work MINUS the 1/2 air line. That you can, and should, source new and locally.
Bottom line:
I'm selling the Nathan K3la horn set, 2 Viair 400C compressors, a 150 psi switch, a 1/2" 12v solenoid, the 5 gallon 8-port tank with the gauge...and probably a half-dozen (if not more) 1/2" quick connect fittings.
I'm selling it for $1000 LANDED in the lower 48 states. Anywhere else you will have to talk to me before I sell. I'll ship FedEx to your doorstep.
Note, a single compressor K3la kit from hornblasters sells for $1549.
If you have any questions, PM me or e-mail at sqcomp@hotmail.com
I've started to remove the horn system from my Yaris. It's time for me to move on to my other project car.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/photo-15_zpsdea0d7eb.jpg
This shows the dual 400c compressors, the 150 psi pressure switch, the pressure gauge and the 5 gallon tank.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/IMG_1648_zps36b638f4.jpg
This is the cleaned up pic as it sits in the car now.
I've already removed the horns, manifold and the 12v solenoid from the front end of the car.
http://i720.photobucket.com/albums/ww203/sqcomp/2007%20Toyota%20Yaris%20S/IMG_1500_zps7ba5ecd9.jpg
This is how it sat on the car (without the front clip)
This following clip is my test of the horn:
http://www.youtube.com/watch?v=YuKjZVsDNVY
I'm selling everything to make the kit work MINUS the 1/2 air line. That you can, and should, source new and locally.
Bottom line:
I'm selling the Nathan K3la horn set, 2 Viair 400C compressors, a 150 psi switch, a 1/2" 12v solenoid, the 5 gallon 8-port tank with the gauge...and probably a half-dozen (if not more) 1/2" quick connect fittings.
I'm selling it for $1000 LANDED in the lower 48 states. Anywhere else you will have to talk to me before I sell. I'll ship FedEx to your doorstep.
Note, a single compressor K3la kit from hornblasters sells for $1549.
If you have any questions, PM me or e-mail at sqcomp@hotmail.com