Log in

View Full Version : Boot behind front wheel?


willisjm193
11-02-2013, 07:38 PM
I was troubleshooting something, and I found the culprit..but I don't know what the exact nomenclature is. What is this item called, or what p/n is it?https://dl.dropboxusercontent.com/u/67156578/IMG_20131102_180323.jpg

CTScott
11-02-2013, 07:58 PM
That is the CV joint boot. You can replace the boot alone, but typically once they tear and dirt gets into the grease the joint gets damaged, so rather than going through the effort of pulling the axle to replace just the boot, one typically replaces the entire axle.

willisjm193
11-02-2013, 08:00 PM
Thanks for the reply, I'll search for parts!!

CTScott
11-02-2013, 10:31 PM
Which side do you need? I have a perfect drivers side one on hand.

willisjm193
11-03-2013, 09:11 AM
I need the drivers side. Should fit the sedan too right?

CTScott
11-03-2013, 11:14 AM
I need the drivers side. Should fit the sedan too right?

Yes. Sedan is the same. I could do $40 + shipping if you are interested.

willisjm193
11-03-2013, 02:57 PM
Yes. Sedan is the same. I could do $40 + shipping if you are interested.

Definitely interested. PM sent.

willisjm193
12-07-2013, 03:08 PM
CTScott: I just got around to looking more closely at the axleshaft, as I have some free time coming up to put it in. Correct me as needed, but this is not for an ABS Yaris? I'm not seeing the reluctor ring. Is it possible to remove the ring from the old shaft and put it on the new one?

CTScott
12-07-2013, 07:00 PM
CTScott: I just got around to looking more closely at the axleshaft, as I have some free time coming up to put it in. Correct me as needed, but this is not for an ABS Yaris? I'm not seeing the reluctor ring. Is it possible to remove the ring from the old shaft and put it on the new one?

The shaft does not have anything to do with ABS, so the same shafts work for both ABS and non.

willisjm193
12-07-2013, 08:52 PM
So where is the ABS Sensor getting the reading from, within the hub?

CTScott
12-07-2013, 11:53 PM
So where is the ABS Sensor getting the reading from, within the hub?

Correct. The sensor is at the end of the cable and the rotor for it is within the hub.