Tein a tech photo request

[mastaofdisasta]

Requesting cars lowered on tein a tech springs all different wheel settings and offsets etc. trying to decide if I want these to replace my df210s. I want more low but not spending 800 on coilovers.

[evo165]

You mean Tein S-tech? :biggrin:

Below are the Tein S-tech photos after installing for 2 weeks.

They are nice and stiffs. After 3 weeks of installing, i revert them to stock. My wife complain too much on how stiffs the ride is every time she is in my car. :respekt:

P.S. Basically after install, you'll have 1 finger gap on the front and 2 finger gap on the rear. :thumbsup:

[cali yaris]

The S-techs would be the lowest off the shelf spring, at least another 1/4" or more than the DF210s

[Kaotic Lazagna]

Too many pics to post, so have a look through my facebook album. With various wheels just like you wanted. lol.

https://www.facebook.com/lazandro.sapinoso/media_set?set=a.1059262528132.2010893.1422985106&type=3

[1.5]

@evo165 you need to tell your wife to shut it, your car looked tooooo good!

[Thirty-Nine]

http://img.photobucket.com/albums/v225/Tekka_Maki/IMG_2539_zps7a890808.jpg (http://smg.photobucket.com/user/Tekka_Maki/media/IMG_2539_zps7a890808.jpg.html)

http://img.photobucket.com/albums/v225/Tekka_Maki/Yaris/IMG_5103.jpg (http://smg.photobucket.com/user/Tekka_Maki/media/Yaris/IMG_5103.jpg.html)

[Mz3oh5]

52290


Not having any rub at all, installed Tein S -Tech lowering springs yesterday I also did a Front Toe Adjustment because it was recommended by the respected Tuner Shop that races Japenese cars, install took about 3 hours. My Megan Racing exhaust muffler does sit really low ... which looks nice, but I have to be drive slow as fuck with speed bumps :) I agree with EVO 165 after the install, you'll have 1 finger gap on the front and 2 finger gap on the rear & when your driving it does feel stiff. I kept my factory springs just in case. Tein will be the lowest drop your going to get on your Yaris.

[Exiwolfman]

ppl that posted above with pics ...wheel tire size please and ty :)

[WeeYari]

^ both of those are on 15s. I think the rubber on the white one is 195/55, don't know about the blue one.

[evo165]

@evo165 you need to tell your wife to shut it, your car looked tooooo good!

Thank you bro 1.5 for your sweet comment. :biggrin:

Till today, i still haven't get used to the tall "SUV" alike stock suspension.

I may go for the Tanabe NF 210 springs kit. Used to have them and they are really very comfortable springs than the stock shock. :thumbsup:

[Thirty-Nine]

Mine are 195/55/15 on 15x6.5 (+40) Konig Daylites

[cali yaris]

I may go for the Tanabe NF 210 springs kit. Used to have them and they are really very comfortable springs than the stock shock.

Yes, Tanabe only upgrades the spring rate to compensate for the drop, keeping a very OEM feel to the ride.

Buy them here: :smile:
http://shop.microimageonline.com/Tanabe-DF210-Lowering-Springs-Yaris-xD-Prius-C-TDF121.htm

[Exiwolfman]

Mine are 195/55/15 on 15x6.5 (+40) Konig
Daylites

ty...its what i plan to run for wheel tire size ...im on sportline now think it should be close to tein drop.

[5ABIVT]

You mean Tein S-tech? :biggrin:

Below are the Tein S-tech photos after installing for 2 weeks.

They are nice and stiffs. After 3 weeks of installing, i revert them to stock. My wife complain too much on how stiffs the ride is every time she is in my car. :respekt:

P.S. Basically after install, you'll have 1 finger gap on the front and 2 finger gap on the rear. :thumbsup:

What kind of wheels are those silver 5 stars? HAWT!!