Clutch Lines

[KSIbucky]

What would after market clutch lines do for performance and are they worth it

[eTiMaGo]

supposed to make your clutch feel less soft, more direct, and probably to handle heavier use (racing, etc). Definitely something in my to-do list.

[FlintS]

CLtuch lines are pretty nice. Also check into brake lines also....

[turboyaris]

the good news is that our clutch line is only about an 8 inch piece and the two connections are just screw-ins for the hard lines. Meaning that if you get the thread right, you should be able to find universal stainless steel lines for pretty cheap.

[03Z33]

I picked up the C-One clutch line when BP had the order going. I'll let you know how it feels once I get it installed, but it probably won't be until I do the R&P, LSD, clutch & FW. The stock clutch pedal sinks to the floor after a few hard laps right now, I haven't blead or replaced the fluid yet, that may take care of it too.

[mrbond]

the good news is that our clutch line is only about an 8 inch piece and the two connections are just screw-ins for the hard lines. Meaning that if you get the thread right, you should be able to find universal stainless steel lines for pretty cheap.

That's not a bad idea, and I don't think anyone on this forum has done this yet. Does anyone know what the thread size is?

Btw, I know this thread is a little over 4 years old, but I didn't want to start another one lol

[mrbond]

Anyone?

[cali yaris]

7:33pm ---> 5:55am no reply = NORMAL :laugh:

I don't know the thread size. This mod isn't even on my to-do list, lol.

[mrbond]

Well, I was going by how many views there were. It went from 230 something to 293 in that time, so I thought that at least one of those people would have known.
Plus I wanted to bump this thread so it wouldn't get lost again lol

[Betrivent]

People didn't respond because were clueless and interested like you

[ricepower]

TRD braided clutch line for yaris is discontinued...Any universal SS clutchline compatible?

[1.5]

SUPER BUMP!!!

[Jeff@MicroImage]

We're working on getting one made, I'll keep everyone updated. No pricing or ETA as of now.

[packetrace]

hmmm interesting...i have to do the swap from auto to manual...may get these instead of stock one :)

[ljming99]

Weds Rev Clutch Line

I PM Garm to check out these - No Reply yet

http://eu.tougedistribution.com/item--Weds-Rev-Clutch-Line--RL-T188C/