Wilwood brake kit now available***

[cali yaris]

The Wilwood brake kit discussed in another thread is now available and I have a kit in stock!

here's the link:
http://shop.microimageonline.com/Wilwood-Big-Brake-Kit-117-FB-bbk-ww1.htm

http://shop.microimageonline.com/images/Yaris_Brakekit_Wilwood_4.jpg

[Astroman]

mmmm car porn :tweetz:

[junorico24]

Are these for the rears?

[WeeYari]

^ No

[Viperoni]

Good price! Make it happen people!

[cali yaris]

This is a FRONT brake kit. The rear kit I carry is made by RunStop.

[1.5]

that looks beautiful I want so bad

[Jason@SportsCar]

Now you can get to work on phase two, the two-piece rotor upgrade. :eek:

http://www.speedinc.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/b/r/brake_kit_140-8009u-lg.jpg

[xnamerxx]

Guess the guy at SEMA wasn't completely full of $h1t and they actually made something.

[WeeYari]

In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?

[CTScott]

In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?

For screwing a bolt into to pop the rotor loose when removing.

[cali yaris]

2-piece rotor is in the works, according to them. Meanwhile, who wants the "only" one?

[1.5]

sponsor me lol

[cali yaris]

I already adopted you. I can't sponsor you now. :tongue:

[1.5]

hahah conflict of interest lol

[cali yaris]

That's correct... son.

meanwhile...

[ilikerice]

I hate you.. You are making my life really difficult garm...... really difficult

[WeeYari]

For screwing a bolt into to pop the rotor loose when removing.

That's what I figured. Just found it odd that the hole was countersunk, and, no matter how closely I looked at photos in the store, could not see evidence of threads.

[Jason@SportsCar]

In the picture of Garm's kit, what is the purpose of the 5th hole on the disc hub face?

A number of Honda/Mazda/other applications still use one or more screws to locate the rotor on the hub. :iono: The rotor used in this kit is likely based on (or is) the same as a number of other 4-100 Wilwood applications, so the hole is in place.

http://img213.imageshack.us/img213/8184/s2kdx.jpg

[cali yaris]

Yes, I think it's a rotor for another car, machined for the Yaris application. The beveled hole is not threaded.

[UberSilver]

Any clearance issues? Need to run larger wheels?:smile:


The Wilwood brake kit discussed in another thread is now available and I have a kit in stock!

here's the link:
http://shop.microimageonline.com/Wilwood-Big-Brake-Kit-117-FB-bbk-ww1.htm

http://shop.microimageonline.com/images/Yaris_Brakekit_Wilwood_4.jpg

[cali yaris]

They should fit *most* 15" wheels. Older designs like Enkei RPF1's may present problems because of narrow barrels. Newer designs like SSR, Volk Racing or Wedsport present no problems.

I will try and get a PDF template for anyone wanting to test with their wheels.

[fnkngrv]

I would like a copy of the template. My current OEM calipers with the slotted rotors that I bought from Scott didn't seem to do badly decelerating from the 147, but it will be interesting to see how well they do from 175+.

[CrankyOldMan]

Are the pads not included? All I see is the pots...

[wildmongoose26]

I think this is the first production kit him and I talked about. I was out of the country for almost 2 weeks for work and wasnt able to really do much about the kit.
Kinda disappointing actually....

[cali yaris]

Cranky the pads are included, I forgot to take a picture of them. I'll add it to the site tomorrow.

mongoose, care to share more detail? Seemed like a positive new contribution to the Yaris community to me.

[wildmongoose26]

Well, if you contacted who I think you did, the kit you have on hand was the kit that he was working on to send to me, but due to traveling I wasnt really able to stay in that close of contact with him.

And I agree its a positive contribution, that's why I initiated it with fast brakes in the first place.

[MUSKOKA800]

They should fit *most* 15" wheels. Older designs like Enkei RPF1's may present problems because of narrow barrels. Newer designs like SSR, Volk Racing or Wedsport present no problems.

I will try and get a PDF template for anyone wanting to test with their wheels.

I would like the template to test the OEM alloys and 14" steelies. Surely no issue for the 18" TRD's.

[cali yaris]

might be a few days before I can set some time for this, the holidays are getting in my way right now. :laugh:

[AznGouki]

Just came across this. Anybody have this kit? I have 15" rpf1 so I would like to know the clearance.

[IllusionX]

Just came across this. Anybody have this kit? I have 15" rpf1 so I would like to know the clearance.


I think you need 17" wheels to clear this big disk brake kit.


Edit: just read that Garm said they should fit 15". But might not fit the rpf1

[mr_miles]

These would clear my massive rotiforms lol. Someone sponsor me puh-leeeaaase :biggrin:

♡

[cali yaris]

They will clear most 16" wheels, or a 15" wheel like the PF01, which has a larger barrel design behind the face.

The 11.7" kit won't clear your 15" Enkeis BUT, I can make you an 11" kit that will.

PM me or email me at mcroimg@gmail.com for more information.