AT to MT Conversion Kit Clearance Sale

[CTScott]

I now have two complete Automatic to Manual transmission conversion kits on hand and really need to free up some space, so I offering them for a small fraction of the sum of the parts.

Price per kit: $400 plus shipping
One kit left - Clearance special: $250 + shipping


Kit includes:

Clutch and Flywheel:
52441

Shifter and Shifter Cable:
52446
52445

Clutch and Brake Pedals:
52443

Clutch Master and Slave Cylinders and lines:
52442

Brake Master Cylinder:
52444

Brackets and Hardware:
52447


Optional:
2007-2008 MT ECM (programmed with your car's VIN): $50
If you have a 2009 or newer you will need to purchase an appropriate ECM from ebay, junkyard, etc. If you ship it to me I will reprogram it for you VIN for no charge.

C150 Manual Transmission (one available, needs rebuilding as synchros are bad): $100 + shipping

[Astroman]

Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?

[CTScott]

Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?

No idea what a rebuild would run. The sum of the synchro rings looks to be about $150.

You could also pick up a used good MT from a local junkyard. They tend to run about $250 to $350 from what I have seen.

[cali yaris]

That's awesome Scott. How many kits do you have on hand?

[CTScott]

That's awesome Scott. How many kits do you have on hand?

Two kits. One from a Yaris that I parted and one from one that I did a MT to AT conversion on.

[47_MasoN_47]

Man....

If I wasn't balls deep into rebuilding my truck's engine I'd buy one of these.

[Ryze268]

What's the shipping weight if you don't mind me asking? :)

[CTScott]

What's the shipping weight if you don't mind me asking? :)

With the clutch and flywheel it is 68 lbs.

[scottbebadboy]

Scott. Is it very expensive to go from manual to auto? How hard of a job is it?

[CTScott]

Scott. Is it very expensive to go from manual to auto? How hard of a job is it?

What I have spent doing the manual to auto conversion is:

1. Automatic Transmission: $300

2. AT Shifter Assembly: $75

3. AT Shifter Cable: $107

4. AT Rear Frame Mount: $22

5. Shifter Cable mounting brackets and AT cooler hoses: $67

6. AT Wiring Harness: $80

7. AT ECM: $50

8. AT Brake Pedal: $50

9. AT Flywheel: $25


Labor-wise it is not that bad, as in my case I already had the engine out.

[yarisgeo13]

Not bad idea but where I live, it's to much traffic and way to many stop lights to warrant a switch. I'll keep my car the way it is, stock auto transmission.

[fnkngrv]

Hm that's a pretty good deal.... do you have an idea what it would cost to have the trans rebuilt?

I can tell you that so far from my research since I burned through my first C50 it was going to run me in the neighborhood of 1k-1200 to do a rebuild with two new gears from the Vibe. A good portion of that cost will be the tools as I have been informed at the least there is 400 in specialty tools alone. The biggest issue is that there really isn't a call for C50 rebuilds so most shops would need to procure the proper tools. :thumbdown:

[White lighting]

Do you still
Have any left?


Sent from my iPhone using Tapatalk

[mazilla]

Well, it doesn't get much easier than that...



Bravo

[CTScott]

Do you still
Have any left?


Sent from my iPhone using Tapatalk

Yes.

[CTScott]

I still have one of these kits left and to get it out of my garage, I will let it go for $250 + shipping.

[CrankyOldMan]

Can I put it on layaway? I just started my first "real" job as a salaried engineer, and I'll have some money to play with in about 2 weeks.

[CTScott]

Can I put it on layaway? I just started my first "real" job as a salaried engineer, and I'll have some money to play with in about 2 weeks.

Sure. And, congrats on the new job!

[CrankyOldMan]

Thanks! I've got my pre-swap C50 sitting on the workbench, with dreams of using it to convert an auto to a manual since they're so much easier to find. I want to start rallyX or stage rally soon, but don't want to feed rocks to the undercarriage of my DD, so this would be an excellent starting point!

[07dirtyaris]

Did you end up selling this to him? I see it's been several months now but thought I would check. I'm planning on doing the conversion later this summer, I'd love to buy that kit for that price

I've done a decent amount to my car so far, a long way to go and learned A LOT from these forums. On my first post I wanted to thank you CTScott among others like Garm and TTR, your research and insight on the yaris has let me believe I can actually build my own stage rally car!!

[CTScott]

I still have one kit on hand

[Astroman]

How much is the full swap kit again? Auto to manual.

[07dirtyaris]

I think I remember reading you could flash the ECM to the VIN on my car for 50? If that's the case I'd definitely want to do that.

[CTScott]

How much is the full swap kit again? Auto to manual.


$200 + shipping. This kit is just missing the narrower brake pedal.

[CTScott]

I think I remember reading you could flash the ECM to the VIN on my car for 50? If that's the case I'd definitely want to do that.


Yes. I can reflash the VIN into the ECM. I don't have an MT ECM on hand, but they can typically be found for under $50.

[07dirtyaris]

Consider it sold! I'll PM you when I get off work later today

[CTScott]

Both kits are now sold.