Official YARIS Wheel & Tire Guide

[Black Yaris]

WHEEL BOLT PATTERN PCD = 4 x 100mm

CENTRE BORE = 54.1mm

OEM wheel sizes, offsets (ET), and tyre sizes (diameter in inches):

14x5, ET45, 175/65/14 = 23.0
15x5.5, ET45, 185/60/15 = 23.7
16x6, ET51, 195/50/16 = 23.7
17x6.5, ET51, 205/45/17 = 24.3
TRD Option 18x7.5, ET42, 215/35/18 = 23.9

With stock suspension, you may safely fit many tyres from 23.0 to 24.3, +/-3%.

__________________________________________________ _______

Recommended offsets (ET) and tyre widths (mm):

ET35+ = 175-185
ET38-ET40 = 175-195
ET42-ET45 = 195-205
ET45+ = up to 215

__________________________________________________ _______

Here is an excellent and easy to use wheel and tyre fitment guide:

http://www.rimsntires.com/specs.jsp

__________________________________________________ _______

Optional tyre sizes (diameter in inches):

*Commonly recommended replacement sizes

Fitment depends on wheel width, offset, and suspension mods.

175/65/14 = 23.0*
185/65/14 = 23.5*
195/65/14 = 24.0
195/60/14 = 23.2*
205/60/14 = 23.7*
215/60/14 = 24.2

175/65/15 = 24.0
185/60/15 = 23.7*
195/60/15 = 24.2*
195/55/15 = 23.4*
205/55/15 = 23.9*
195/50/15 = 22.7
205/50/15 = 23.1* (Most lowered applications)
215/50/15 = 23.5
225/50/15 = 23.9

195/50/16 = 23.7*
205/50/16 = 24.1*
215/50/16 = 24.5
195/55/16 = 24.4
205/45/16 = 23.2* (Most lowered applications)
225/45/16 = 23.9

205/45/17 = 24.3*
205/40/17 = 23.5* (Most lowered applications)
215/40/17 = 23.8

215/35/18 = 23.9*
225/35/18 = 24.2
205/40/18 = 24.4

__________________________________________________ ______

Staggered fitments:

1. Staggered offsets are common in Japan. These applications even out fitment front to rear and are purely for appearance. Tyre size generally remains constant front to rear. Staggered offsets preclude tyre rotation. Recommended maximum stagger is 10mm.

Example: FR, ET45//RR, ET38

Example: FR, ET42//RR, ET35

2. Staggered tyre widths are less common, especially on front wheel drive cars. These applications even out front to rear fitment. They are not recommended for the track, but as an appearance option they are safe under normal driving conditions. Staggered tyre widths preclude tyre rotation.

Example: FR 205/55/15//RR 225/50/15

Example: FR 205/50/16//RR 215/50/16

Example: FR 205/40/17//RR 215/40/17

3. Wheels spacers are another option to even out fitment front to rear. Maximum recommended rear spacer width is 10mm. Tyre rotation is still possible.

Example: FR, ET42//RR, ET42 with 5-10mm spacer

[eTiMaGo]

Awesome! Now we have a place to refer people for those daily questions :biggrin:

[Doc Zaius]

Here's a cut & paste from an Excel spreadsheet I made up a while ago to help determine various tire sizes. Both models' sizes are included (as there is a 3.41% difference in diameter from the base to the RS model!). This doesn't take into account the ratio between wheel widths and tire widths.

Base Model with 175/65/14:
Width Aspect Wheel Diameter Circumference Difference
(mm) (%) (in) (mm) (in) (mm) (in) (mm) (in) (%)

Orig. 175 65 14 583.10 22.957 1831.86 72.121 -- -- --

+1 185 55 15 584.50 23.012 1836.26 72.294 4.4 0.17 0.24%
185 60 15 603.00 23.740 1894.38 74.582 62.5 2.46 3.41%
195 55 15 595.50 23.445 1870.82 73.654 39.0 1.53 2.13%
195 50 15 576.00 22.677 1809.56 71.242 -22.3 -0.88 -1.22%
205 50 15 586.00 23.071 1840.97 72.479 9.1 0.36 0.50%

+2 195 45 16 581.90 22.909 1828.09 71.972 -3.8 -0.15 -0.21%
195 50 16 601.40 23.677 1889.35 74.384 57.5 2.26 3.14%
205 45 16 590.90 23.264 1856.37 73.085 24.5 0.96 1.34%
205 40 16 570.40 22.457 1791.96 70.550 -39.9 -1.57 -2.18%

+3 205 35 17 575.30 22.650 1807.36 71.156 -24.5 -0.96 -1.34%
215 30 17 560.80 22.079 1761.81 69.362 -70.1 -2.76 -3.82%
215 35 17 582.30 22.925 1829.35 72.022 -2.5 -0.10 -0.14%
225 35 18 614.70 24.201 1931.14 76.029 99.3 3.91 5.42%
225 30 17 566.80 22.315 1780.65 70.105 -51.2 -2.02 -2.80%


RS Model with 185/60/15:
Width Aspect Wheel Diameter Circumference Difference
(mm) (%) (in) (mm) (in) (mm) (in) (mm) (in) (%)

Orig. 185 60 15 603.00 23.740 1894.38 74.582 -- -- --

+1 195 50 16 601.40 23.677 1889.35 74.384 -5.0 -0.20 -0.27%
195 55 16 620.90 24.445 1950.61 76.796 56.2 2.21 2.97%
205 50 16 611.40 24.071 1920.77 75.621 26.4 1.04 1.39%
205 45 16 590.90 23.264 1856.37 73.085 -38.0 -1.50 -2.01%
215 45 16 599.90 23.618 1884.64 74.198 -9.7 -0.38 -0.51%

+2 205 40 17 595.80 23.457 1871.76 73.691 -22.6 -0.89 -1.19%
205 45 17 616.30 24.264 1936.16 76.227 41.8 1.65 2.21%
215 40 17 603.80 23.772 1896.89 74.681 2.5 0.10 0.13%
215 35 17 582.30 22.925 1829.35 72.022 -65.0 -2.56 -3.43%

+3 205 35 18 600.70 23.650 1887.15 74.297 -7.2 -0.28 -0.38%
215 30 18 586.20 23.079 1841.60 72.504 -52.8 -2.08 -2.79%
215 35 18 607.70 23.925 1909.15 75.163 14.8 0.58 0.78%
225 35 18 614.70 24.201 1931.14 76.029 36.8 1.45 1.94%
225 30 18 592.20 23.315 1860.45 73.246 -33.9 -1.34 -1.79%


Wheel width to Tire width Ratios:
Tire Width Wheel Width in inches, and the wheel/tire ratio
mm inches 5 5.5 6 6.5 7 7.5 8
175 6.890 72.57% 79.83% 87.09% 94.34% -- -- --
185 7.283 68.65% 75.51% 82.38% 89.24% 96.11% -- --
195 7.677 65.13% 71.64% 78.15% 84.67% 91.18% 97.69% --
205 8.071 61.95% 68.15% 74.34% 80.54% 86.73% 92.93% 99.12%
215 8.465 59.07% 64.98% 70.88% 76.79% 82.70% 88.60% 94.51%
225 8.858 56.44% 62.09% 67.73% 73.38% 79.02% 84.67% 90.31%
235 9.252 54.04% 59.45% 64.85% 70.26% 75.66% 81.06% 86.47%

Hope this helps, and adds to the information already provided! :thumbsup:

Z

[ChinoCharles]

Now this is one gangster-ass thread... an instant classic.

[Doc Zaius]

The fact that there's such a huge difference in circumference between the base model and the RS model (more than 3%) has always made me wonder... like if they have different speedometer gearings...?! Weird, isn't it? And since the base model has smaller tires, it should mean it can accelerate faster than an RS can! :tongue:

[the_boss]

can't imagine a yaris with 20' wheel:confused:

[largeorangefont]

[QUOTE=Doc Zaius;74847]The fact that there's such a huge difference in circumference between the base model and the RS model (more than 3%) has always made me wonder... like if they have different speedometer gearings...?QUOTE]


The speedos are not gear driven. I really doubt the calibrations are different.

[Black Yaris]

Here's a cut & paste from an Excel spreadsheet I made up a while ago to help determine various tire sizes. Both models' sizes are included (as there is a 3.41% difference in diameter from the base to the RS model!). This doesn't take into account the ratio between wheel widths and tire widths.

Hope this helps, and adds to the information already provided! :thumbsup:

Z

you know some of those tire size you have in there do not yet exist... The tire sizes I have posted above are common and are easy to get ahold of for the common person, if a new tire size is made ANYONE PLEASE contact me so that I can edit the post to I can get the corrected information out to the people! But that is a nice spreadsheat ya got there Z

[Doc Zaius]

you know some of those tire size you have in there do not yet exist...

You're right... I checked out 1010tires.com (http://1010tires.com): The 30 series tires don't exist, and one of the 35 series tires don't... at least on that site. But ALL of the +1 and +2 sized combinations I listed (all of the 40 series tires and bigger) are there, which almost 99% of people would be considering anyhow (except spkrman & his huge 20"s!). So ya... for regular sizes, they exist. :thumbsup:

I'll post a link so the people can download the spreadsheet if they want. I'll have to do it from home though b/c I'm firewalled at work!

[brickhardmeat]

I love this, Heil the Tire Nazi!:clap:

[Black Yaris]

I love this, Heil the Tire Nazi!:clap:

funny thing is, Ich spreche Deutsch!

[eTiMaGo]

(as there is a 3.41% difference in diameter from the base to the RS model!)

Funny thing, may be related or not.. My current tires are 0.8% smaller (or larger, can't remember) than stock, according to the Toyota Thailand specifications. But there is about a 5% discrepancy between my speedo and the speed reportd by my GPS unit. i.e when the speedo says I am going 100km/h, the GPS says I am going 95. Now, as far as I understand the GPS should be as accurate as can be, seeing as it calculates speed based on the actual rate of movement of the vehicle, not a wheel sensor.

What do you guys make of this?

[PetersRedYaris]

Funny thing, may be related or not.. My current tires are 0.8% smaller (or larger, can't remember) than stock, according to the Toyota Thailand specifications. But there is about a 5% discrepancy between my speedo and the speed reportd by my GPS unit. i.e when the speedo says I am going 100km/h, the GPS says I am going 95. Now, as far as I understand the GPS should be as accurate as can be, seeing as it calculates speed based on the actual rate of movement of the vehicle, not a wheel sensor.

What do you guys make of this?

Your correct about the GPS being far more accurate. The thing is, with my stock tires/wheels, my speedo was 3% off. If your was the same, combine that with your .8% difference and your getting close to your 5% discrepancy.

Black Yaris- Nice thread, very helpful! I'll reference tire/wheel PM's here from now on.

[Blenjar]

ncie thread!!! I love it!

-- Blen

[brickhardmeat]

funny thing is, Ich spreche Deutsch!


nice:thumbsup:

Against your advice I did end up going with these for a 15X7 wheel....


Falken Ziex Ze 512
205/50R15 17.9Lbs.

I almost went with these guys ....

Falken Ziex Ze 512
225/50R15 20.1Lbs.

[eco]

This should be emailed to every new member,or better yet,a private message.

[Black Yaris]

nice:thumbsup:

Against your advice I did end up going with these for a 15X7 wheel....


Falken Ziex Ze 512
205/50R15 17.9Lbs.

I almost went with these guys ....

Falken Ziex Ze 512
225/50R15 20.1Lbs.

Hey to each there own, Just providing info, and my experiences, you may do as you wish to your own car :headbang:

[brickhardmeat]

Hey to each there own, Just providing info, and my experiences, you may do as you wish to your own car :headbang:

I appreciate all the advice. Didn't go ignored.

[Black Yaris]

Now where are the pix? huh? :biggrin:

[brickhardmeat]

It will be a little while, wheels and tires are coming seperately and then I'll have to get them mounted and balanced. I doubt I will even have the wheels by next weekend as they aren't even shipping out until next week. I'm so tired of waiting for stuff. I promise I'll post some pics. My photographer is "on call" for a Yaris photo shoot.


not sure how accurate this really is but anyway might make a nice addition to this thread....


http://www.wheelweights.net/

[Doc Zaius]

Hey wheelman! I gotta question:

With regards to the ratio between the wheel width and the tire width, what is the ideal or optimum number we should be aiming for? 80%? 85%? 90%?

I'm assuming that at (for example) 95%, the rim is almost as wide as the tire, and would probably have difficulty mounting. On the other hand, if the rim was only 65% the width of the tire, sidewall flex and/or other issues would probably make it a bad fit.

I'm also assuming that with a smaller sidewall (lower profile tire), your wheel-to-tire width ratio would be higher, as there's less sidewall to move "inwards".

Anyhow... ya... could you give me an answer to this? Or is it something I don't really need to care about? Or whatever! :biggrin:

Thanks! :thumbsup:

[Black Yaris]

that is a hard one Z since almost every tire is dirrerent.... let say my 225/50VR15 BFG g-force sports and if BFG made a Traction T/A in the same size, with the same speed rating.... the actual contact patch is different, and depending upon how they cam out of the mold the beads could be closer or farther apart, making them easier or harder to mount.

As for personal preferance I like my tire to slightly overhang my wheel for 2 reasons (1) to protect my wheel on curbs (2) I like the little bit of extra width and the tiny bit of extra sidewall flex ya get
so to answer your question, if I had to put a # on it I would say wheel 95% of the tire contact patch width (NOT size i.e. 225/50R15)

[Doc Zaius]

so to answer your question, if I had to put a # on it I would say wheel 95% of the tire contact patch width (NOT size i.e. 225/50R15)

Ok... your wheels are 15x7's, right? And a 225mm tire is about 8.9" wide... so the difference there is about 79%. So does that mean if you're aiming for a 95% ratio with the contact patch, then the contact patch is somewhere around 7.4" wide? If thats true, I'm surprised theres a 1.5" difference between tire width and contact patch... pretty big. I wonder how that would change with different types of tires, like you said. Or would the contact patch actually be wider...?

All very interesting. If there was a 7.5" or 8" wide wheel, would you have gone with that instead, yielding a 85% or 90% ratio between wheel & tire widths respectively? Do you think that might result in less sidewall flex?

:thumbsup:

[Doc Zaius]

Whoa.... I just found out (from that other thread) that you can mount a tire thats more narrow than the rim. Who'd've guessed?! This is news to me..!!! :confused:

[ivanjovicusa]

what do you think about 215-40-17 wheels? Whould it destroy the car, is it better to go with 16? Need fast answer?

[Go4th]

What about some sort of list for the off sets too?

[Nutzoids]

Found a Good Visualizer:

http://customwheel.com/custom_wheels/default.php

Crappy Wheels... But what a good looking car!

:evil:

[the_boss]

this one isn't that bad either


http://www.discounttire.com/dtcs/interactive.dos;jsessionid=GmGyJrLnfxQGyJGLvLQJnS2 QCh4gnqKLhtqPsDsTdsL9YmT6vTH4!-1044489687!NONE

[Black Yaris]

Whoa.... I just found out (from that other thread) that you can mount a tire thats more narrow than the rim. Who'd've guessed?! This is news to me..!!! :confused:

you can, not recommended though, there are many shops that will not stretch tires, extreme stretches are unsafe and the tire shop becomes liable if that 6 inch wide tire were to come off that 10 inch wide wheel

[Black Yaris]

What about some sort of list for the off sets too?

for most applications a +42 offset will do, if you are looking to do something out of the norm (extreme lowering, extra wide tires/wheels) offsets will range accordingly

[Black Yaris]

Bump for all the noobs, I have been directing here anyway

[spkrman]

20"
225/30/20 1.57 inches taller than stock tire
speedo will read 6.607% slower than actual speed (aprox 5mph on e-way)



its like a jedi mind trick... I KNOW the speedo is reading lower, but sometimes it just doesnt register.

getting an actual % reminds me to pay better attention :headbang:

[Black Yaris]

bump, I have been seeing a lot of tire chat threads again

[barebonedvitz]

what offset can u suggest for 15x7 wid 205 55? i'm planning on getting rota slipstreams... thanx!

[Black Yaris]

+42

[eTiMaGo]

the most beautiful, wondrous and amazing wheel and tire size calculator ever:

http://www.rims-n-tires.com/rt_specs.jsp

it covers pretty much EVERYTHING

[barebonedvitz]

+42

ty:biggrin:

[Doc Zaius]

the most beautiful, wondrous and amazing wheel and tire size calculator ever:

http://www.rims-n-tires.com/rt_specs.jsp

That is pretty cool! I like the real-time cross-section of the wheels & tires.

[hasher22]

Hey peeps i gotta a question.....well i baught my wheels, they are still at the painters.

Though im stuck on what the hell what profile tyres to get. Whatever u wanna call it.

I know it says 205/40/17...............i get the 40/17 part

but question is with the 195/205/215/225 and so on......is this the tyre width??? or how "skinny" the tyres are from rim to whatever. Sorry i cant make the question clearer....so i photoshopped some tyres....weeeeee

1 or 2?

http://img246.imageshack.us/img246/5210/chromewheelscopylp8.jpg

[eTiMaGo]

the first number is #2 in your picture. Then the second number (40), which corresponds to number 1 in your picture, is the percentage of the tire width... confused yet?

Go look at that site I just posted, play around with it, it will clear up a lot of things :smile:

[hasher22]

Thanks....that was cleared some things up like u said :smile:

Ok well this is what i want;

The wheels i baught are 17/7.5/40

Would this be a good tyre fitment..?? 205/30/17 since i want the "number 1" (in the picture i posted) to be thin to make the wheels look bigger.

[Doc Zaius]

Hey Hasher... ok... when talking about wheel sizes, you usually only refer to their diameter (17 inches) and their width (seems like 7.5" in your case). Not sure where you're getting the "40" number from for the wheel. So I'm guessing your wheel is 17 x 7.5, yes?

So for tires, the main goal is to try to maintain the same overal diameter as your original tires. So if you go with a bigger wheel, you need a smaller sidewall so overall, everything stays the same. While putting on a 30 series tire (who's sidewall is 30% the width of the tire) may look good to you, it will be too small a tire for the car, and your speedmeter will be off. If you must-must-must have a 30 series tire, you'll need a wider tire... like a 225 or something. For a 205mm wide tire, a 40 series profile is perfect.

Good luck! :thumbsup:

[Sabretooth]

+35 offset work ok with some 215/50/16's lowered with Tanabe DF's?

[Black Yaris]

if you want them to rub your fenders on bumps, tire is too wide to run with that offset with DF's

[Razr]

Theoretically speaking* my 215/45R17's are 3.8% larger than the OE fitment, but 4+ months and 6000+ KM down the track I've no problems at all to report.

Even when fully loaded for a 2500KM journey last April (giving it a ~2" drop) I only experienced two light rubs in the front - but that was only when hitting some pretty nasty bumps at 140+ KM/hr :)

Speedo seems bang-on to me as well, so I'm guessing the stock calibration is on the low side to begin with. Ride quality is 95% as good as the OE tires, but handling and general stability is much improved of course. I will stick to this size when buying tires again fer sure!

* I say Theoretically because it all depends on your weght load vs. infaltion pressure of course. It's pretty easy to add a couple of % to your rolling circumference by increasing the tire pressure.

[Black Yaris]

Even when fully loaded for a 2500KM journey last April (giving it a ~2" drop) I only experienced two light rubs in the front - but that was only when hitting some pretty nasty bumps at 140+ KM/hr :)



but that was in the rear only, the problem lies in the front

[Razr]

Not so - the front passenger seat was fully loaded, as was the drivers seat :P

The drop was pretty much the same front & rear. On top of that, both front rubs happened under heavy (albeit late - it was night) braking, so even more weight would have been distributed to the front.

[brickhardmeat]

BUMP for N00bz

[Edd]

Some of you don't seem to be quite clear with what the measurements are. It usually goes tyre width/aspect/rim diameter, in mm/%/inches, eg 185/65/16. Here's a diagram.

[kurokoma-kun]

OK. please, please don't flame me for this question. I have searched and read and I do understand what the x/x/x numbers mean, :tongue: but...

Why is 195/60/15 not recommended size?

My reason for asking is I just bought 15x6.5 wheels, and have been trying to find 195/55s, but no local shop has them in stock! Another option is Discount Tire Direct because I have a $50 coupon, but the 55s are MUCH more expensive than the 60s!

I'm guessing the 60s will be ok, even tho speedo will be off a bit, just wanted to run it by the experts...

[brickhardmeat]

OK. please, please don't flame me for this question. I have searched and read and I do understand what the x/x/x numbers mean, :tongue: but...

Why is 195/60/15 not recommended size?

My reason for asking is I just bought 15x6.5 wheels, and have been trying to find 195/55s, but no local shop has them in stock! Another option is Discount Tire Direct because I have a $50 coupon, but the 55s are MUCH more expensive than the 60s!

I'm guessing the 60s will be ok, even tho speedo will be off a bit, just wanted to run it by the experts...


60 is too much side wall babe

I went with 205/50/15

edgeracing.com may have exactly what you are looking for or you could go 205/55/15

[kurokoma-kun]

60 is too much side wall babe

Yeah, you're right. I know you are supposed to maintain stock wheel/tire diameter so as not affect suspension geometry. But I was not understanding clearly how much increased sidewall height affects cornering. That extra flex supposedly gives better ride but makes for sloppy cornering, exact opposite of what i'm going for.

Was just trying to save money again--dayam, why am I so cheap? :redface: But it turns out there are LOTS of good 205/50 choices so that what I'm getting! :biggrin: Springs/shocks next!

[brickhardmeat]

Yeah, you're right. I know you are supposed to maintain stock wheel/tire diameter so as not affect suspension geometry. But I was not understanding clearly how much increased sidewall height affects cornering. That extra flex supposedly gives better ride but makes for sloppy cornering, exact opposite of what i'm going for.

Was just trying to save money again--dayam, why am I so cheap? :redface: But it turns out there are LOTS of good 205/50 choices so that what I'm getting! :biggrin: Springs/shocks next!


205/50/15 is my #1 choice on this car. It will only slightly thow the speedo and the odo at 10000 will likely read 10300 not enough to make any difference for me. It just looks right to me. you will want a good drop though because you'll be dealing with an extra 1/2 inch of wheel gap so I would suggest DF's or Coilovers or Tein springs. Just something to consider. I got my Basics today and I am drooling over them right now.

[Edd]

Heh, you should go extremely the other way, so when you go to sell "Yaris, 7 miles, excellent condition, 5 years old". :wink:

[WolfWings]

205/50/15 is my #1 choice on this car. It will only slightly thow the speedo and the odo at 10000 will likely read 10300 not enough to make any difference for me.

Hell, the factory 15" OEM versus 14" OEM tires have more of a difference than that. 10000 on the 15" factory tires would read as 10400ish on the 14" factory tires.

[c-one yaris]

i lowered my yaris with the tanabe DF210 springs... i want to know if these will fit my car WITHOUT ANY KIND OF RUBBING WHAT SO EVER:

RIM:15"x7" DRAG DR-30
TIRES: 225/50/15 Falken ZEIX ZE-512

AND if you have any suggestions i would also appreciate that.
THANKS!

[Black Yaris]

no they will not fit with out ANY rubbing, that is why I got rid of my my 225/50R15's

[c-one yaris]

ok. now what's the widest i can go on 15", 16", and 17"?? better yet, is there an official tire guide for lowered yaris'?? that be a lot easier. Thanks Black Yaris!

[Black Yaris]

widest you realy want to go on the front is a 205 when you are lowered, you can go 215 in the rear... you want to run staggard or not?
here are some recs to run all the way around
15-205/50, 205/55
16-205/50
17-205/40, 205/45

[kimona]

ok. now what's the widest i can go on 15", 16", and 17"?? better yet, is there an official tire guide for lowered yaris'?? that be a lot easier. Thanks Black Yaris!

That answer depends on wheel width and offset.

If you post those specs, we can probably help you with tire sizing.

[Black Yaris]

That answer depends on wheel width and offset.

If you post those specs, we can probably help you with tire sizing.

true... I was just giving general sizing options

[Energiser]

Hey guys,

I'm looking at getting some new wheels for my Yaris. It's been a fairly lengthy process with me finding something I like, then finding it isn't appropriate for one reason or another (usually associated to my expensive taste, and the fact I'm trying to get nice 16" wheels in Australia...)

The wheels I'm looking into at the moment are Enkei SC03's, 16" x 7", pcd of 4x100, and am planning to put 205/50/R16 rubber on them. The problem comes when I'm trying to figure out the offset.

From what I can find online, these wheels come in a +35 variety, and a +43 variety. I've noticed a few people on the forums with slightly larger offset on the front as opposed to the back (say +42 on front, +36 on back) and was wondering if it's worth going to that sort of trouble, or if I'm better off going +43 all around?

I haven't gone looking for quotes on these yet, wanted to finalise what I want before I start... so for all I know, these could be more expensive than I'm willing to pay, too.

Regards,
Energiser

Edit: Where on the Yaris is the tyre placard generally located? I can find a sticker inside the glove box which mentions my stock 14 x 5 steel wheels, but I thought they were supposed to list the range of wheels suitable for the car. Or at least the range available from the dealership as options (which are 15 x 6 here in Australia).

[kimona]

ET43FR//ET35RR would make a great staggered offset with 205/50 rubber. I run a set of 45/38's on mine with 205's and the fitment is excellent. I'm not a fan of tyre rotation, so that's not an issue for me... but, it may be a consideration for you.

[arunto]

Will 15x6.5" 38mm offset with 195/55/15's with Tanabe DF's rub?

[whooppee777]

i want to get these rims.

http://www.axiswheels.com/wheels.php?id=racer-x

15x7 in the front and 15x8 in the rear. I know the front will be fine, my only worry is the -.27 offset on the rear wheels. can it be done? Also i'm dropped on Tanabe DF210's

http://i33.photobucket.com/albums/d62/whooppee777/racer-x8rose.jpg

[mchllp925]

Hello everyone.
So for clarification...I use racing discs over my 185/60R15's allseasons, can I put 205/50R15's on my Yaris without any issues such as rubbing? I do not intend to lower my car.
I just want wider tires. And if so, do you think it would throw off the speedometer?

[kimona]

Hello everyone.
So for clarification...I use racing discs over my 185/60R15's allseasons, can I put 205/50R15's on my Yaris without any issues such as rubbing? I do not intend to lower my car.
I just want wider tires. And if so, do you think it would throw off the speedometer?

If you're not lowering, then install 205/55/15's with no worries. 205/50/15's are too short with stock suspension. Your speedo will be fine.

[Black Yaris]

oh shit, i almost forgot about this thread.... I will do some updating to the first post
Kimona, feel free to make any edits you see fit

[mchllp925]

Thanks for the quick reply Kimona.
Appreciate it!
Darrin

[darthbauer]

So will these fit and rub?

17x7.5 offset is 45 wheel with 215/40 rubber?

[kimona]

So will these fit and rub?

17x7.5 offset is 45 wheel with 215/40 rubber?

Are you lowered, and if so, how much?

[kimona]

oh shit, i almost forgot about this thread.... I will do some updating to the first post
Kimona, feel free to make any edits you see fit

Okay. I'll take a peek later.

EDIT: I've made a few changes to the wheel/tyre guide. I'll get back to it another time and update tyre size recommendations.

[darthbauer]

Right now I am not lowered. If I do lower I will go with the TRD sportivo set up with the shocks and springs.

[kimona]

17x7.5 ET45, 215/40 rubber. Should be okay with TRD drop.

[whooppee777]

u wont rub with that. any takers for my question above?

[kimona]

Here you go...777:

"...the one of a kind 15x8 has a 5 inch lip! This is done with a negative 27 offset, and can only fit the most extreme widebody fitments."

[DJexor]

Hello there, I see all sizes for a new Yaris. Does anyone know what the max offset would be on an 2001 TS model (oldest model)? Would prefere 17". Thinking of Work CR Kai 17x7 off +42

[kimona]

Hello there, I see all sizes for a new Yaris. Does anyone know what the max offset would be on an 2001 TS model (oldest model)? Would prefere 17". Thinking of Work CR Kai 17x7 off +42

Don't know what the min/max wheel/tyre fitments are for the 2001 model, but I believe that 17x7, ET42 should work... no worries.

[Black Yaris]

you can run low offsets similar to the scions if you want

[hafeez]

i am going to lower my yaris sedan with the tanabe DF210 springs. i just want to know if these rims will fit without it rubbing or causing any problems. They are 17" x 7" Tenzo Passion 5 ET42 wrapped in 205/40/17 Kumho Ecsta tires. Thanks in advance.

[kimona]

i am going to lower my yaris sedan with the tanabe DF210 springs. i just want to know if these rims will fit without it rubbing or causing any problems. They are 17" x 7" Tenzo Passion 5 ET42 wrapped in 205/40/17 Kumho Ecsta tires. Thanks in advance.

Should be okay with that setup.

[kou]

i am looking at 15''/7'' et38 should i get 205/50 or 195/55.

[kimona]

i am looking at 15''/7'' et38 should i get 205/50 or 195/55.

Are you lowered?

[kou]

yes trd sportivo.thanks

[kimona]

yes trd sportivo.thanks

Well, with 15x7, ET38, I would prefer to run 195mm rubber.

195/55/15 tyres sound like a good choice with your setup.

[kou]

thank you i will start looking.

[Black Yaris]

I like the updated guide Kimona!

[kimona]

I like the updated guide Kimona!

Thanks. I did that a while back. Not complete yet. I'll get on it one of these days and finish it up.

[kimona]

thank you i will start looking.

You can find a bunch of tyre choices at this site: tires-easy.com

Sort by price, then click on shipping quote to find the real price. Shipping varies quite significantly by tyre.

[hafeez]

thanks a lot kimona

[Marfulion]

Performance wise, what would be the best tire, rim, etc size for a yaris puttin out about 150hp? thanks

[GrayFox]

Here is another good calculator, just in case you found the other ones a bit too confusing. This is also good to compare stock size with any aftermarket size.

http://www.miata.net/garage/tirecalc.html

[Saggio]

Subscribed. Thanks!

[tonyg]

those TRD wheels make no sense. With the TRD springs and the TRD Option 18x7.5, ET42, 215/35/18 = 23.9

can someone explain to me how these wouldnt rub big time? If 205 rubs on stock wheels, how is 215 with a 42 offset not going to rub?

[pixitha]

Does anyone know the exact dimensions of this wheel: http://www.trdsparks.com/displayparts.php?Mdl_dtl=544&Part_cat=16&parts_id=1101

I have the standard steel wheel black and ugly with ghetto hubcaps and wan't something else...

I have 185/60/15 on the wheels right now and want to make sure the Toyota alloy wheels from TRD will still work with those and such?

thanks!
-pix

[goku87]

4x100

[scape]

from a performance and wallet stand point, what is a recommended setup for standard springs and 1.5" dropped? I keep finding 15" x 6.5" is about as large without getting too heavy (i was hoping to go as light or lighter than stock, if that's possible while still going slightly taller and much wider). assuming 15x6.5, is 185/55 a good fit, or are the tires too skinny for the rim?

[scape]

now that i'm looking around 205/50/15 looks more appealing on a 15x6.5

[derickveliz2]

I have 205/50/15!

.

[scape]

Staggered fitments:


2. Staggered tyre widths are less common, especially on front wheel drive cars. These applications even out front to rear fitment. They are not recommended for the track, but as an appearance option they are safe under normal driving conditions. Staggered tyre widths preclude tyre rotation.

Example: FR 205/55/15//RR 225/50/15

Example: FR 205/50/16//RR 215/50/16

Example: FR 205/40/17//RR 215/40/17


why are staggered tire sizes not recommended for the yaris? too much understeer as a result?

[tk-421]

I have 205/50/15!

.
+1
Although 205/55/15 is still perfectly acceptable if you'd rather fill out the wells a bit more. I'm very happy with my setup though.

[id3379]

Thanks for the info!

[Black Yaris]

just a FYI I am running 205/50R17's
I had too many problems with Toledo roads and 205/40R17's

the 50 series looks, fits and rides awesome

[kimona]

just a FYI I am running 205/50R17's
I had too many problems with Toledo roads and 205/40R17's

the 50 series looks, fits and rides awesome

Are you talking about the Toaster or the Yaris?

[liyux2k]

"15x5.5, ET45, 185/60/15 = 23.7" is that offset for the stock black steel rims and hubcaps or the stock alloys? or both?

[kimona]

"15x5.5, ET45, 185/60/15 = 23.7" is that offset for the stock black steel rims and hubcaps or the stock alloys? or both?

OEM alloy wheel/tyre specs.

[zarniko]

which tire should i use to put xxr513 15x7 with the DF210 springs so that it wont rub?..or is it not possible with the 7in width???

[hafeez]

hey i have a question;
my 07 sedan is lowered on megan springs which is about a 1.5" all around. if i'm using my stock alloy wheels what would you recommend for tire size? for no rubbing?

+1
Although 205/55/15 is still perfectly acceptable if you'd rather fill out the wells a bit more. I'm very happy with my setup though.

[Omu]

can't imagine a yaris with 20' wheel:confused:

Like 4 years old kid wearing papa's shoes...

[svgllmnt]

I have a no frills standard 2007 Yaris, and while I've browsed through this thread I guess my question still remains, so I hope you guys don't get upset with me for asking if this has been asked before.

I currently have the stock tires on my car (185/60R15) and its time to get new ones, but everywhere I go different stores are suggestion different size tires and I don't want to get something I don't need. I'm not looking for speed enhancing tires or anything like that, just basic, simple, boring tires.

Suggestions I have received have included tires that are 195/65R15 and even 175/65R14. Now I know the 14s won't fit on my car obviously, but would the 195/65R15's make a big difference? Would they even fit on my car?

I've never purchased tires on my own for a car so I want to make sure I'm not being sold something more expensive that I don't need.

Please help & again like I said I apologize if I missed a similar post with the same question.

[unclenefeesa]

I have a no frills standard 2007 Yaris, and while I've browsed through this thread I guess my question still remains, so I hope you guys don't get upset with me for asking if this has been asked before.

I currently have the stock tires on my car (185/60R15) and its time to get new ones, but everywhere I go different stores are suggestion different size tires and I don't want to get something I don't need. I'm not looking for speed enhancing tires or anything like that, just basic, simple, boring tires.

Suggestions I have received have included tires that are 195/65R15 and even 175/65R14. Now I know the 14s won't fit on my car obviously, but would the 195/65R15's make a big difference? Would they even fit on my car?

I've never purchased tires on my own for a car so I want to make sure I'm not being sold something more expensive that I don't need.

Please help & again like I said I apologize if I missed a similar post with the same question.


Best bet is to get tires with the same size the old ones (185/60R15) unless you where having trouble with them which I seriously doubt.

[elmo]

Best bet is to get tires with the same size the old ones (185/60R15) unless you where having trouble with them which I seriously doubt.

agree stock size is best, however i have 205/55/15's on my car no rubbing :smile:

[1.5]

does the bore on the new aftermarket rim have to be 54.1mm?

[Black Yaris]

does the bore on the new aftermarket rim have to be 54.1mm?

no, but new wheels usually have hub centric rings available that will snuggly fit the OE hub

they are not a must, but a good idea to help prevent vibration issues, I personally have not ran them, and I have yet to have a vibration problem with out them

[Black Yaris]

Best bet is to get tires with the same size the old ones (185/60R15) unless you where having trouble with them which I seriously doubt.

well that is not entirely true. different tire sizes can be used to get a better ride, more performance or just better looks.

I ran 205/50R15's on my Yaris since it fit nicely on my 15x7 wheels with my 2 inch drop.... and it was one of the few sizes that BFG Super Sport A/S's came in at the time

everybody likes something different, that is why there are so many choices

[Black Yaris]

which tire should i use to put xxr513 15x7 with the DF210 springs so that it wont rub?..or is it not possible with the 7in width???

I ran 205/50R15's with the same setup, they fit with no problems what so ever

[1.5]

thanks black yaris! what a quick response

[Black Yaris]

np, I was bored, just trolling the forum

[1.5]

typically the offset of a given wheel also refers to the lips size correct? The lower the offset the wider the lip? I just am having the hardest time finding the perfect wheel. I am trying to decide b/w either a 15x7.5 ET20 or a 16x7 ET40 (i want something deep dish and think these will have little to no lip) or a 16x7 ET20. My ideal wheel would be 16x7.5 ET20 would these even fit?

[Black Yaris]

the offset refers to the surface where the wheel bolt to the hub
http://rcmoc.org.uk/bitsnbobs/images/wheel_offset.JPG

and you can have two wheels with the same offset and width, with different size lips

16x7.5 +20 would most likely poke out from the fender on a Yaris

[1.5]

ooooooo I get it so the offset more decides the concaveness of convexness of the face of the wheel itself. Im not worried about it poking out, Im trying to go hella flush or even a little past flush. I just want to make sure it wont rub or if I have to roll the fenders. So i cant really look at the offset to tell me the lip size?

[kimona]

Yeah, the offset will tell you nothing about the "lip size".

Any plans for suspension mods?

16x7, ET42 with 205 rubber will be just about flush up front, but tucked in the rear, so you may want to go with a 10mm rear spacer .

[1.5]

yes I plan on going with 5mm spacer in front and 10mm spacer in the rear, Im going super flush man lol, and i plan on going with some coilovers, havnt decided which yet, and camber kit.

[kimona]

You won't need spacers up front with 7's, ET42 and 205's.

[1.5]

ok true thanks.

[Inspector14]

ok i have been looking at that chart and am a bit confused. i ordered my summer tires and wheels (General Altimax HP on OZ Superturismo)

the wheels are 14x6 et 36 wrapped with 185/65-14 tires. tirerack has reservations on if these will fit. im sure they will. i just want to hear it from the gurus.

[Thirty-Nine]

ok i have been looking at that chart and am a bit confused. i ordered my summer tires and wheels (General Altimax HP on OZ Superturismo)

the wheels are 14x6 et 36 wrapped with 185/65-14 tires. tirerack has reservations on if these will fit. im sure they will. i just want to hear it from the gurus.

Well, the +36 et is about 11mm farther out compared to the +45 stock et. I'm not sure about this one, since you'll be running a 185mm tire on a 6" wheel. You'll probably be just fine, so long as you're not slammed.

[kimona]

ok i have been looking at that chart and am a bit confused. i ordered my summer tires and wheels (General Altimax HP on OZ Superturismo)

the wheels are 14x6 et 36 wrapped with 185/65-14 tires. tirerack has reservations on if these will fit. im sure they will. i just want to hear it from the gurus.

14x6, ET36, 185mm rubber will fit just fine.

[Inspector14]

14x6, ET36, 185mm rubber will fit just fine.

thank you :biggrin:

now i just need to get all four boxes here safely with no damage. next summer is gonna be fun!

[XYaris]

I run 17x7, et40 right now and when I replace my tires (205/40/17) I really want to increase the amount of sidewall. What is the best/recommended manner of accomplishing this, other than buying smaller wheels, which I am also considering.

Can I run a slightly wider tire (215/40) or maybe run 205/45/17. Will either or both of these rub? Im on trds and Im about to get some blue struts. Thanks.

[zenonis]

can anyone tell me the original offset of my yaris 1.3L 2003 RS please?
thanks

[everydaylife]

I run 17x7, et40 right now and when I replace my tires (205/40/17) I really want to increase the amount of sidewall. What is the best/recommended manner of accomplishing this, other than buying smaller wheels, which I am also considering.

hey, I have a 2005 echo rs hatch back and I am looking at some konig feather 17" +40 with 205/40/17's so the same size tire you are running. I wanted to know why you want to change them? Have you had any problems?

[paulyates]

Black Yaris, and others....

Great forum by the way!

I am changing to new wheels and tires, and read a bunch, but have not found answer to this question:

When you go larger width tire/wheel, obviously you gain weight.

What is not particularly straightfroward to me is as the DIAMETER of the wheel increases, the WHEEL weight, all things being equal, shall also increase. BUT, all things being equal, is there a DECREASE in TIRE weight, as the sidewall (assuming the total tire diameter is stable) decreases in thickness, you'd expect the weight to drop. I'm sure it not at all straigtforward as the sidewall likely has to be thicker as the aspect ratio drops. I expect that the tire weight loss does not keep up with wheel weight gain.

What sort of weight changes are we talking about, from stock 15x5.5 steels WITH stock tires, going to a set of Rotas or Konig 15-16x7 at 14-17lbs? Anyone weighed their wheel/tire sets before and after?

There are also inertia issues if weight is being displaced radially (outward) relative to the tire. If you've got 20 lbs, you'd rather have all of it at the hub, not the rim (not considering strength here).

So, what sort of weight ranges are acceptable for 16, 17inch wheel/tire upgrades? Or said another way, the $/lb saved is not linear, if you're going under 18lbs you pay a bit more (16" wheel), under 14lbs, a LOT more.

I thought it simple, but it ain't. SOME size of tires are a LOT more than others right nearby in size. Any to avoid?

LASTLY, I might lower, likely not. I'm cheap, and I like to drive as quick as I can on winding roads through the local mountains/woods. I'm thinking 15x7 is the best bet for me. Perhaps 16x7 as another choice. I'll keep a set of snows on the stock steel wheels.
Seems 225 is likely too fat, less OK, No?
Seems as well that 15x7.5 too wide a wheel (as you're not going over 225 anyway).
Is there any significant change going from 15x5.5 to 15x6.5, or is 15x7 the best way to go (if you're staying 15" wheels)?

Sorry to run long, I welcome anyone's thought on the matter.
PY

[why?]

To answer the tire weight questions, most tire companies now list tire weight on their web site. Check them out to look at different weights.

One thing to think about is as the aspect ratio of the sidewall gets smaller, the sidewall has to get stronger, meaning it ways more.

To answer your question, Toyo Proxes R888 @ 225/55/15 weigh 23.7 lbs, and Konig Helium weigh about 11 pounds for 15 x7.

the stock yaris 15x6 weighs 16 lbs, and the stock tires weight 17 or 18lbs.

To put it simply, the better the tire handles, the more it will weigh. For performance, find the lightest wheel you want to afford, and just get the tire you want.

[paulyates]

thank you sir.

[scape]

i think weight is a tricky thing as not all rims are weighted in the same places (some have more weight at the rim itself rather than the hub bolt section) as well some tires (low profile) can have heavy belts to keep their stability and form under stress, comes with the territory of low profile high performance tires (and thus more weight at the outermost portion of the tire/wheel diameter is going to be felt first)
I personally went with 195/55/15's general exclaim uhp's, adds more grip than stock and also better stopping while also maintaining relatively similar weights.
after some research I found you can not get the exact stock tire as the aftermarket tire (same brand and type) actually weighs more.

[why?]

but who would want the oem stock tire? They truly stink.

For rim weight use wheelweights.net. The best guide out there.

[XYaris]

hey, I have a 2005 echo rs hatch back and I am looking at some konig feather 17" +40 with 205/40/17's so the same size tire you are running. I wanted to know why you want to change them? Have you had any problems?

I have come close to damaging the rims a few times. I guess my rims are strong because i can see where the tire and been stressed a bit and the rim may have a slight scratch (no bends at all). I am just interested in adding some sidewall to the mix. Since running stock rims with snows for the winter Ive really enjoyed having some cushion.

[Rikster]

I've got 15" 7J et 44 work cr-kai's, i was thinking of a 185/55/R15 tire! will this fit properly?

[kimona]

I've got 15" 7J et 44 work cr-kai's, i was thinking of a 185/55/R15 tire! will this fit properly?

Yes, 185's will fit, but with ET44, you can install 205's and have a very nice fitment.

[Rikster]

Yes, 185's will fit, but with ET44, you can install 205's and have a very nice fitment.

i think 205's will make my car pretty slow, it's just a 1.0

[SilverBack]

Yes, 205's will slow you down just a little because of a larger contact patch and increased rolling resistance. Also, like Why said, they can weigh more because of thicker sidewall construction. These are my only regrets with this tire, so the next DD set to get will be the same brand but in 195.

[Billiam]

Alright fellas...I just read this entire thread and it's kinda got me rethinking my possible setup. I thought I was going rather conservitive, but maybe not.

Here's what I was thinking:

TRD or NF210 springs

Rim #1 - 15x6.5, +38mm offset with a 205/55 tire

Rim #2 - 15x6, +39mm offset with a 205/55 tire

Will I really rub with either of these setups?


EDIT: Ok...forget the 6.5 inch rim. I just bought a set of OE xB1 rims...that'd be rim #2, 15x6, +39mm offset. So...like I asked, do you gurus think I'll be ok with a 205/55 tire with either of the above mentioned springs?

[Billiam]

Anyone? :iono:

[tk-421]

I have almost exactly the same setup (205/50R15 +38 on 6.5" wheels with NF201 springs) and there's no rub whatsoever. I went with a bit lower profile tires because of price concerns, but I will probably go with 205/55 the next time around since there's definitely enough space in there for that size.

[Billiam]

I have almost exactly the same setup (205/50R15 +38 on 6.5" wheels with NF201 springs) and there's no rub whatsoever. I went with a bit lower profile tires because of price concerns, but I will probably go with 205/55 the next time around since there's definitely enough space in there for that size.
Thanks for the info. :thumbsup:

I'm actually getting a bit of conflicting info though. Some say that with a 1.5 inch drop, 15x6, +39mm offset and a 205/55 tire I may get some rubbing in the front fender during hard bumps.

My wheels and TRD springs are already are ordered, so I can't really change that. I think I'll just get the springs installed and evaluate how it sits on the stock steelies/tires and go from there.

If anyone out there is running a 205/55/15 tire on a 6 inch rim with 39mm offset on TRD springs...please chime in. :thumbsup:

[10DG22]

I have a set of 15 by 7 4 lug 0 offset wheels, would they fit possibly?

[Mouse]

I'm looking at some 14x7 28 offset wheels with 195/55/14 tires. Will this setup fit with a 2" or more drop?

[TinyGiant]

has anyone fit 215/50/17 on without any issues?

[khilafet]

hi all..i'm newbie in wheel n tire topics..which one is the best in performance and fuel economy for oem tires mentioned in first post..i currently have 185/60/R15..if i want to replace it,should i buy a bigger wheels/tires or stick with the same size??thanks

[kimona]

has anyone fit 215/50/17 on without any issues?

I've seen several Vitz with 205/50/17's on stock suspension in Japan. Looked good with no issues according to the owners.

[Dadombomb15]

Do you guys think a 205/40/17 would be fine on a sedan with AOE tigertec springs? I'm thinking about getting these (http://www.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialPartNumber=CE775410040S&wheelMake=Sport+Edition&wheelModel=CE&wheelFinish=Silver+Painted&showRear=no&autoMake=Toyota&autoModel=Yaris+Sedan&autoYear=2007&autoModClar=&filterFinish=All&filterSize=All&filterBrand=All&filterSpecial=false&filterNew=All&sort=Weight) after i get my springs, but don't want rubbing

[VQ35]

I'm considering 15x7 wheels with 35 offset along with TRD springs for my 3dr hatch. Will I have any issues with either 185/60-15 or 195/55-15 tires?

I've searched and can't find many examples of others with this setup to get a clear answer. Thanks in advance.

[detroiter]

I would like to know what would be a good size tire to run on stock rims, with Tein Stech springs and TK blue shocks? I'm looking at 205-55-15 or 195-55-15. I prefer the 205 but don't know if I'll have rubbing issues. Please let me know

[Omu]

this one isn't that bad either


http://www.discounttire.com/dtcs/interactive.dos;jsessionid=GmGyJrLnfxQGyJGLvLQJnS2 QCh4gnqKLhtqPsDsTdsL9YmT6vTH4!-1044489687!NONE

This interactive wheel thing is really bad done. Any wheels on any cars will look ugly with this program.

[talcum]

I have almost exactly the same setup (205/50R15 +38 on 6.5" wheels with NF201 springs) and there's no rub whatsoever. I went with a bit lower profile tires because of price concerns, but I will probably go with 205/55 the next time around since there's definitely enough space in there for that size.
Ok, I've got Tein coilovers instead of springs for my drop, but otherwise we're the same. My Dunlops need to be replaced. What's the best tire for summer driving?
Talcum

[HTM Yaris]

Try this tire in this size and I feel certain you will love this tire .
If you would like to see a full hands on demonstration of how good these tires are , just go to the Photo/Video page on this forum and look for Dragon Yaris HD .

http://www.tirerack.com/tires/tires.jsp?tireMake=Dunlop&tireModel=Direzza+Sport+Z1+Star+Spec&partnum=955VR5Z1SS&vehicleSearch=false&fromCompare1=yes

[yarisboi]

could i fit 15 x 6.5J alloys to my yaris without any clearance issues/rubbing arches with cornering? i've got a 99' 1.0 lol

[vic2099]

Hi Everyone, Im new here with my new bought Yaris I 2001 1.3vvti.

It has 175/65/14 steel wheels with ET probably 45 or 46.
I'm wondering if 7Jx15 ET38 with 195/50/15 tire wouldn't be just perfect?

In this size 195/50/15 comes so many tires - the choice would be huge. Also - 195/50/14 is cheaper sometimes than 185/60/14 or 175/65/14 !!

So I think the best of the best choices for now to me Yaris will be this setup:

7Jx15 ET38 4x100 54.1mm with Uniroyal Rainsport or Rainexpert tires 195/50/15. The cheapest chips aye?

The Australian.

[slapper]

Hey guys.
Need some assistance, i drive the new TS. It comes out with “205 45 R17” can i change it to “205 40 R17”? Will it affect the performance of my car? Will it damage the gearbox?

[kimona]

Hey guys.
Need some assistance, i drive the new TS. It comes out with “205 45 R17” can i change it to “205 40 R17”? Will it affect the performance of my car? Will it damage the gearbox?

Yes, you can run 205/40's without any problems whatsoever... but WHY would you want to do that???

[derickveliz2]

It comes out with “205 45 R17” can i change it to “205 40 R17”? Will it affect the performance of my car? Will it damage the gearbox?

Yes you could.

Yes will affect performance, acceleration and breaking will be quicker (due to a smaller diameter) it's going to feel peppier, and will turn corners faster

No It won't damage gearbox

Your speedo will read a 3 or 4 MPH faster than actual (at highway speeds) aprox.

The gap between tire and fender will be bigger

Your ride will be harder (less rubber) you may feel bumps more than before.

I'm not an expert on the topic but I hope it helps, I'm sure other YarisWold members would have something to say, specially the ones that have done this exercise!

What is your goal changing tires size?

.:thumbsup:

[limochong]

i have 2007 yaris sedan model. original size for the tyre is 185/60/15 or 15x 5.5...
okay now i want to get rim which is 15x6 is it okay to put it on?? guys your comments are greatly appreciated...

[kimona]

i have 2007 yaris sedan model. original size for the tyre is 185/60/15 or 15x 5.5...
okay now i want to get rim which is 15x6 is it okay to put it on?? guys your comments are greatly appreciated...

No problem going with wider wheels... 15x6, 15x6.5, 15x7.

[Billiam]

i have 2007 yaris sedan model. original size for the tyre is 185/60/15 or 15x 5.5...
okay now i want to get rim which is 15x6 is it okay to put it on?? guys your comments are greatly appreciated...
Here's some 15x6, +39mm offset wheels with 205/55 tire. Fits just fine. :thumbsup:

http://img.photobucket.com/albums/v403/BlkS/IMG_3762.jpg

http://img.photobucket.com/albums/v403/BlkS/IMG_3760.jpg

[limochong]

just curious question, what's the difference between 15 x 5.5 and 15 x 6??
is it okay with 185/60/15 size tires on15 x 6 rim?

[kimona]

just curious question, what's the difference between 15 x 5.5 and 15 x 6??
is it okay with 185/60/15 size tires on15 x 6 rim?

The difference is 1/2". 185mm tyre can fit on wheel width 4.5-7.0"

[limochong]

The difference is 1/2". 185mm tyre can fit on wheel width 4.5-7.0"

thanks buddy~

[vic2099]

195/50/15 are much cheaper than 195/55/15.

I have 2001 model and next week I'm fitting 15x7 ET38 rims with 195/50/15 tires. Not lowered.

[vic2099]

Here we go, here we go, HERE WE GOOOOOOOO !!!!!!!!!! YEEEEEEEEEEEEEEEEE

Perfect fit !!!!!!!!!!

Stock 5Jx14 (or 5.5Jx14, to dirty to see :) ) 175/65/14 replaced !!!!!!!!!!!!

195/50/15 with Toyo Proxes 4 tires , ET38, centric rings 60.1>54.1, 7Jx15, new nuts, VOILA !!!!!!


Im gonna get drunk tonight with VB beer :D



TADAAAAAAAAAAAAAA !!!!!!!!!



http://a.imageshack.us/img442/2780/rimsyaris.jpg (http://img442.imageshack.us/i/rimsyaris.jpg/)
http://a.imageshack.us/img835/2330/yaro.jpg (http://img835.imageshack.us/i/yaro.jpg/)


Michael

[shastatodd]

Will a larger diameter tire which will lower engine revs give me better fuel economy? Most of my driving in on the freeway. The stock tire is 175/65/R14.
I can get the Michelin Hydroedge in:
185/65/R14
185/70/R14 or
195/70/R14 (assuming this tire will fit the clearances)

While bigger tires are heavier and less efficient, they will also raise the effective gearing,lowering the engine revs which should benefit MPG's right?

Thanks in advance for the help with this.

Todd

[sleey0]

Allright folks.

Getting some +45 ET RP03's - 17x7.

Are 215/45/17 the rec tires for this? I am lowered about 1.5 inches.

I see the diameter is more. So maybe 215/40 or 205/40?

Confused?!?!

Thanks!

[kimona]

Will a larger diameter tire which will lower engine revs give me better fuel economy? Most of my driving in on the freeway. The stock tire is 175/65/R14.
I can get the Michelin Hydroedge in:
185/65/R14
185/70/R14 or
195/70/R14 (assuming this tire will fit the clearances)

While bigger tires are heavier and less efficient, they will also raise the effective gearing,lowering the engine revs which should benefit MPG's right?

Thanks in advance for the help with this.

Todd

185/70/14 would be an excellent fitment at 24.3" diameter... equivalent to OEM 205/45/17.

[kimona]

Allright folks.

Getting some +45 ET RP03's - 17x7.

Are 215/45/17 the rec tires for this? I am lowered about 1.5 inches.

I see the diameter is more. So maybe 215/40 or 205/40?

Confused?!?!

Thanks!

I'd install OEM tyre size 205/45/17 with that wheel and your drop.

[sleey0]

Kimona!!

You are like the tire God around here. lol :D

Thanks, bro and I will def post some pics when my setup is complete.

[sleey0]

One more for you kimona:

17x7 +38mm ET enkei ev5's.

Recommend the OEM 205/45 or 205/40 (or anything else)? I was told the 205/40's should be fine on less than 2" drop.

THANKS!

[kimona]

One more for you kimona:

17x7 +38mm ET enkei ev5's.

Recommend the OEM 205/45 or 205/40 (or anything else)? I was told the 205/40's should be fine on less than 2" drop.

THANKS!

With 7's, ET38, I generally prefer 195mm rubber, but with 17's you don't have much choice but to run 205's.

I would prefer 205/45's with your 1.5" drop; however, with ET38-40, I'd probably run 205/40's... a tyre size I really don't like too much.

If at all possible, choose 7's with ET42 or greater; they just work better up front for a simple bolt and go application.

[sleey0]

Yeah, I know. The only reason I am even thinking about the 38ET's is because of price.

Can get an entire set of wheels for $300 and they are in excellent condition with minimal pitting.

As opposed to the RP03's that will run at least $1k without tires. lol

[kimona]

Yeah, but the dual-drilled Enkei EV5's are rather unsightly IMHO.

[moonlighter6]

nice:thumbsup:

Against your advice I did end up going with these for a 15X7 wheel....


Falken Ziex Ze 512
205/50R15 17.9Lbs.

I almost went with these guys ....

Falken Ziex Ze 512
225/50R15 20.1Lbs.

2008 Yaris Manual, needed more cross-wind grip, this set-up helped.
I went with 15x7 Sport Technic Mono10 wheels and Falken Ze 912 225/50r-15 tires. I will have to weigh the package next rotation. Not a set-up for lowering but the stability calms my nerves. Also, was almost sucked under tractor/trailer's too many times with the old 185/60r-15 factory set-up.

[sleey0]

Yeah, but the dual-drilled Enkei EV5's are rather unsightly IMHO.

I thought they look pretty nice. Guess to each his own.

[kimona]

I'm just not a fan of any dual-drilled road wheels.

[sleey0]

So the holes bother, not the design of the wheel.

[nickstamat]

Hello guys, I need a little help here, because I did not come with an answer while searching.


Reference wheel fitment is this one (offered by TTE, so it is a perfect fit for the Yaris): Picture (http://i372.photobucket.com/albums/oo163/ctscott329/TTE%20Rims/TTE1.jpg)
Specs for the above pictured wheel are: 16x7" and ET45.


So, having in mind that tire size will definitely be 195/50/R16, which is the lowest offset that the wheel should have?


For example, the Work CR-Kai is 16x7" with ET44, which would fit perfectly, but the O.Z. Ultraleggera has ET37. Would ET37 be OK with the specified tire size?


The car is currently not lowered, but it might be lowered (no more than 1.2") in the future.

Thanks in advance!

[derickveliz2]

Hello guys, I need a little help here, because I did not come with an answer while searching.


Reference wheel fitment is this one (offered by TTE, so it is a perfect fit for the Yaris): Picture (http://i372.photobucket.com/albums/oo163/ctscott329/TTE%20Rims/TTE1.jpg)
Specs for the above pictured wheel are: 16x7" and ET45.


So, having in mind that tire size will definitely be 195/50/R16, which is the lowest offset that the wheel should have?
O.Z. Ultraleggera has ET37. Would ET37 be OK with the specified tire size?


The car is currently not lowered, but it might be lowered (no more than 1.2") in the future.

Thanks in advance!

No problems after I took the 10 mm spacers !

O.Z. Ultraleggera - 195/50/R16 - ET37

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/c476b504.jpg

[nickstamat]

No problems after I took the 10 mm spacers !

O.Z. Ultraleggera - 195/50/R16 - ET37

derickveliz2, you have a very nice sedan :w00t:

With ET37 wheels and 10mm spacers you actually got an effective ET27 (if I am not mistaken) and you had no problem with that? Sounds weird!

[derickveliz2]

derickveliz2, you have a very nice sedan :w00t:

With ET37 wheels and 10mm spacers you actually got an effective ET27 (if I am not mistaken) and you had no problem with that? Sounds weird!



I did have rubbing issues with 10mm spacers. without them no more rubbing.

I'm sorry I should have been more specific!:redface:

NO spacers = NO rubbing

D.

[nickstamat]

I did have rubbing issues with 10mm spacers. without them no more rubbing.

I'm sorry I should have been more specific!:redface:

NO spacers = NO rubbing

D.

Ok, now I get it!
I also hope that the hatchback (which is what I have) has the same space under the fenders as the sedan!

Thanks for helping! :redface:

[kimona]

16x7, ET37, 195/50/16 will be a good fit. ET37 is the lowest offset I would trecommend with 195's.

[nickstamat]

Thanks kimona! This will help me end up somewhere... :smile:

[derickveliz2]

16x7, ET37, 195/50/16 will be a good fit. ET37 is the lowest offset I would trecommend with 195's.

kimona is right on the dime! also if you consider lowering your car, the front wheels get very close to the fenders. If you are planing to lower your car by a lot, be aware of the limits with ET37

2 cts.

[madz]

Hello Guys,

i need to change stock tires size 165/70/14 BS of my Japanese vitz with 185/60/15

I already got japan vitz OEM 15 rims...

Can anyone tell me..which is ideal replacement size for 15" based on my stock tires 165/70/14..

will it cause any problems with suspension shocks, speedo ratings etc?

thanks!

[husaynkhan]

Hi everybody, i wanted to have the opinion of each oF u. I wanted to know which best tire can fit my car properly. i've just install New Rims 14'' and am having a 175/70R14.

i want the to have a bit thin, not that much but a bit..........will 185/60 go.?

[kimona]

Not sure what you mean by a "bit thin" but these sizes generally work very well:

Tyre Size = Diameter (inches)
175/65/14 = 23.0
185/65/14 = 23.5
195/65/14 = 24.0
195/60/14 = 23.2
205/60/14 = 23.7
215/60/14 = 24.2

[husaynkhan]

But what are these numbers
23.0
23.5
24.0.....etc???

[nimdeos]

Hi guys ... lots of info here. I need to know if the following snow tires will fit my 2007 sedan a la yarismo.

195/65/15

Its not on the list in above posts ...but thought I should double check.

Thanks !

n

[kimona]

Hi guys ... lots of info here. I need to know if the following snow tires will fit my 2007 sedan a la yarismo.

195/65/15

Its not on the list in above posts ...but thought I should double check.

Thanks !

n

They're pretty darn tall... but they will fit.

[Klink10]

But what are these numbers
23.0
23.5
24.0.....etc???

Those are the diameter figures for the wheel and tire package they are next to.

ie: 185/65/14 = 23.5 would mean a 185/65 tire mounted on a 14" rim would be pretty darn close to 23.5 inches in total diameter.

[Midnight Drifter]

Size.............Offset Range.....Backspace Range.......Weight
14" x 6"........6 to 32mm........93.2 to 119.2mm .......13.6lbs


Based on that data, what would be the most preferred configuration for my wheels?

[kimona]

Size.............Offset Range.....Backspace Range.......Weight
14" x 6"........6 to 32mm........93.2 to 119.2mm .......13.6lbs


Based on that data, what would be the most preferred configuration for my wheels?

Depends on the size tyre you want to run, if you are dropped, and whether you want to make camber adjustments.

If you simply want to bolt some wheels on your car, then 14x6, ET32 would work with 175-185mm tyres.

[Midnight Drifter]

Depends on the size tyre you want to run, if you are dropped, and whether you want to make camber adjustments.

If you simply want to bolt some wheels on your car, then 14x6, ET32 would work with 175-185mm tyres.

Kinda trying to go wide here... if 205 can fit then 205 would be my preference. If not wider (somehow) Not looking to change camber, while grip is important daily drivability-even tire wear is twice so. Can I push 215? The more rubber, the better.

I think the wheels I'm looking at are lighter than stock steelies, but couldn't tell you for sure lol.

[kimona]

14x6, ET40-45, 205/60/14

[ilikerice]

i know some people are pushing 225mm tires on a 6" rim... but the side wall looks like its at a 45 degree angle off the rim.. also thats stock suspension.. my race rims are 15x7 with a 40ET. i run 225/50/15 khumo v700.. if i turn the steering wheel all the way left or right, the tires rub on the chassis

[Midnight Drifter]

14x6, ET40-45, 205/60/14

Stupid question here, what's ET? ._.

[kimona]

Offset.

[marlondog]

What about a 15x7 +27 offset with a 195/55/15 tire.I'm already lowered about 1.7". Is it possible? How much negative camber and fender pulling and rolling are we talking about?

[YarisPR]

What about a 15x7 +27 offset with a 195/55/15 tire.I'm already lowered about 1.7". Is it possible? How much negative camber and fender pulling and rolling are we talking about?

This is what I'm aiming for :biggrin:

[henry33]

is it ok to put 6.5J R15 ET (offset 35) on the yaris hatchback ? I do not know if the offset is good since originally there was Et40
thank you

[kimona]

^^ Which size tyres will you run?

[henry33]

I will be using 185/60 r15 and originally there was ET45

[kimona]

^^You'll be fine with that set-up.

[henry33]

ok so I will buy those wheels most probably ;)
thank you

[PumpkinSteve]

I have 16 x 6.5 ET45 and I'm wondering if I can fit 205/50/R16 if my car is lowered by 30-35mm? I have the 1.8 Yaris which already has the steering lock reduced as standard to stop the 17" wheels rubbing, so it might be okay with this model?

[Yari5Love]

Quick question thinking about buying some wheels but wasn't sure if they would fit my 08'Liftback the wheels are 4x100 bolt pattern&13x7 with a 15 offset anyone know if they'll fit without making any adjustments to the car? my car isnt lowered or anything just stock. please no flaming just a question I need answered. thanks

[kimona]

Quick question thinking about buying some wheels but wasn't sure if they would fit my 08'Liftback the wheels are 4x100 bolt pattern&13x7 with a 15 offset anyone know if they'll fit without making any adjustments to the car? my car isnt lowered or anything just stock. please no flaming just a question I need answered. thanks

Quick answer: No, they won't fit.

[piranha0522]

So I found a nice set of rims in my area.
They are 16" 4 bolt with tires 205, 45, 16. These would fit fine right?
I have an '06 5dr liftback.

What does everyone mean when they say offset? I still haven't figured that out.

Thanks!

[RedRide]

Offset explained:
http://www.tirerack.com/wheels/tech/techpage.jsp?techid=101

[ilikerice]

also bolt pattern. make sure they are 4x100.

[Yari5Love]

Quick answer: No, they won't fit.

Thank You!!!

[Midnight Drifter]

Just a quickie here, can going from factory size (180-60-15) to a slightly taller sidewall (185-65-15) be afforded without rubbing?

[kimona]

Just a quickie here, can going from factory size (180-60-15) to a slightly taller sidewall (185-65-15) be afforded without rubbing?

You should be fine with 185/65/15's. Post a pic if you decide to go that way.

[Midnight Drifter]

Will do, the tires I have in mind have a very unique feature to them. Won't see any pictures for months though, still gotta wear out the stocks. ;)

[derickveliz2]

Will do, the tires I have in mind have a very unique feature to them. Won't see any pictures for months though, still gotta wear out the stocks. ;)

Tell us please!


(o:

[glhsracer]

Great thread, lots of good information. I have an 08 Yaris Sedan, I believe it has 185-50-15, car is not here so I can't walk out to check. I have a new set of 205-50-15 in my garage, do you think these would these be too much for the Yaris? I think it would look better with a little more tire but don't want to get too carried away. Any advice would be helpful, thanks.

Glhsracer

[derickveliz2]

Great thread, lots of good information. I have an 08 Yaris Sedan, I believe it has 185-50-15, car is not here so I can't walk out to check. I have a new set of 205-50-15 in my garage, do you think these would these be too much for the Yaris? I think it would look better with a little more tire but don't want to get too carried away. Any advice would be helpful, thanks.
Glhsracer

In winter I run with 205/50/15, they look great if your car is lowered, performance is awesome. The Diameter is less than OEM (smaller tire) speedometer will read about 3% faster than actual.

D.

[Midnight Drifter]

Tell us please!


(o:

You'll just have to see it when it's time to change my tires :)

[derickveliz2]

FYI....

My snow tires didn't like the negative camber )o: on rear end.


D.

[SKurj]

Ok would like to know which offset you would recommend... Looking at a 2008, 3 dr with Tein springs, Kosei 17x7 with 205 40 17, the rims come in 2 offsets, 38 and 42. Which would be the wiser choice?

Thanks

[kimona]

Ok would like to know which offset you would recommend... Looking at a 2008, 3 dr with Tein springs, Kosei 17x7 with 205 40 17, the rims come in 2 offsets, 38 and 42. Which would be the wiser choice?

Thanks

I would recommend ET42. With the drop and 205mm rubber, ET42 works best up front.

[Murtaza_murti]

How much would my Belta's fuel consumption be affected by adding 185/65/R15 after the stock 165/70/R14.

[MitchReeves2967]

I don't understand what this stuff means. I'm not the most knowledgable about this stuff.

[kimona]

I don't understand what this stuff means. I'm not the most knowledgable about this stuff.

What information are you looking for?

[MitchReeves2967]

Like what all goes into choosing wheels?

[SKurj]

Ok still trying to make up my mind....

How about 17x7.5 ET40 rear and ET45 front with 205/40/17?

With Tien springs... on a 3dr hatch

[kimona]

Ok still trying to make up my mind....

How about 17x7.5 ET40 rear and ET45 front with 205/40/17?

With Tien springs... on a 3dr hatch

That should work.

[wanako]

Here's my plan: '10 Yaris 5-door LB, Rota RB 15x7 either +35 or +40 and 195/60/15's on H&R Sport Springs. Anybody have a similar setup and have rubbed? I would prefer the +35 but +40 would ok.

Thanks.

[ilikerice]

you will be ok with +35 with 195/50.

[wanako]

you will be ok with +35 with 195/50.

so If I wanted to keep the 60 sidewall, +40 would be better right? Why I want 195/60 is so I can have that extra 10mm of tread width but still be able to purchase long life tires. The little car isn't gonna be a racer but a daily driver. An awesome looking one. :biggrin:

[ilikerice]

DEFINITLY^ I got 195/60/15 on my rota's also. +40 offset 15x7

You will PLENTY of room, and im on coilovers also reallly low

[ChitownY@Ris]

Please help. Will 215/45/17 tires (from a Scion Tc) fit on my rims that are currently wrapped in 205/40/17.
I want to change the tires because I currently have some no-name summer tires and I'd like to swap them for the all-season Yokohamas.

[TOUGEghost]

Why I want 195/60 is so I can have that extra 10mm of tread width but still be able to purchase long life tires. The little car isn't gonna be a racer but a daily driver. An awesome looking one. :biggrin:

195/50 and 195/60 are the same width.

[TOUGEghost]

Please help. Will 215/45/17 tires (from a Scion Tc) fit on my rims that are currently wrapped in 205/40/17.
I want to change the tires because I currently have some no-name summer tires and I'd like to swap them for the all-season Yokohamas.

Yes, the tires will fit on the wheels. Whether or not they will rub on the fenders is another question.

[ChitownY@Ris]

Yes, the tires will fit on the wheels. Whether or not they will rub on the fenders is another question.
Thanks for the help. I am not lowered, just stock. It is the daily driver, with two kids in the back, wife and I in front. Does this matter?

[wanako]

195/50 and 195/60 are the same width.

yes, i know. I was referring to 10mm more from stock size. I see I didn't mention that sooner.

[TOUGEghost]

^^My bad.

Thanks for the help. I am not lowered, just stock. It is the daily driver, with two kids in the back, wife and I in front. Does this matter?

Stock height should be no problem.

[dnagard]

Does anyone has experience with these tires (Nexen WG231 175-65-14)? They are $61 in Canadian Wallmart and they are made in China.

[yarisugi]

Nexen tires are made in Korea. Never had experience with the ones you mentioned, but Nexen brand is pretty good.

Maybe you were looking at Nankang?

[Dj_SloKid]

??? will it Rub ???? 18x7.5 et 40 tire 205/40/18 yaris sedan dropped on df210 stock shocks, please help and if u have pics please post

[Kendrik]

has anyone tried a 16x8 +30 offset on the rears of the sedan?
going for a flush look, what's the maximum backspacing/frontspacing at the rears without hitting the fenders or using spacers?

[illmike]

What's the best tire size I should get? Picked up some 15x7 +27 all around. Going to have coilovers with a 1.5-2 finger fender gap