tein s tech how to place springs

[Exiwolfman]

got some s tech ...can someone post pics on which way they go on as in top/bottom of spring for front and rear ...got them used and instructions only say how much to cut the bum stops by unless its somewhere in there may have to read it again lol

Please and thank you.

[cali yaris]

Did you buy them from us?

...downloads are in our forums for coilover installs. And there's another recent thread on here by a guy documenting his.

[yarisugi]

I think he's talking about springs only.

[ezhacker1]

Is there writing on the spring? Will show which side is up.

[Exiwolfman]

Found the writing on springs got the rear in today front will go in on my half day Tuesday ...can say one thing twin s tech are definitely lower than sportline ...car sits little higher up front ...will post pics later with sportline and tein

sent from Mars using Moto g !

[vaironl]

If you don't mind posting the manual that will be great, as I got some recently too (used). Reading on their website the fronts should have a part number that begins with F and the rear should begin with R. I would assume that the Tein logo should be readable on the right orientation. But I haven't found specific information on the bump stop, so the manual would be helpful. Thanks!


Sent from my iPhone using Tapatalk

[Exiwolfman]

Will post that for u Monday cos instructions for bump stops are at work ...if I can remember they said to cut stock bump stop by 1 1/4 inch ...

sent from Mars using Moto g !

[cali yaris]

Tanabe DF210 instructions have you cut the bump stops in half. I'm guessing the S Techs are quite similar.

[Vitz_Q8]

you should cut it 1.4 inches from the bottom part.
here is the tein instruction sheet
http://s9.postimg.org/7d4z7vjof/20140708_113001.jpg