Valet 712t issue

[nortonfb]

I have installed the Valet 712t (thanks for the DIY & Dan & Scott).
The only issue I have is the horn doesn't work when the alarm is activated.
The horn does work with the panic button.
I do have an after market air horn with relay.
The weird thing is, with the door open and I try the alarm the door buzzer will work like the horn is supposed too.
Any thoughts?
Thanks,
Steve

[CTScott]

If it works with the panic button then it sounds like a configuration issue with the 712. Go through the config menus for it and make sure that the alarm output is set to the horn and not to an external siren output.

[nortonfb]

thanks Scott.
I will give it a try.
Steve

[nortonfb]

Still having the same issue.
The instruction booklet states that "if in audible mode".
How do you get into audible mode?
I turned the valet portion on & off and pressed the aux button
which triggered the horn.
The horn will not activate with the locks.
Thanks,
Steve

[CTScott]

Still having the same issue.
The instruction booklet states that "if in audible mode".
How do you get into audible mode?
I turned the valet portion on & off and pressed the aux button
which triggered the horn.
The horn will not activate with the locks.
Thanks,
Steve

Sounds like a question for Valet. The DEI product instruction books always leave you scratching your head.