PDA

View Full Version : Rumble when applying brakes


CB900F2
08-15-2014, 08:56 AM
Hey guys

I replaced my pads (oem) with a set of beck rotors last year and I have developed a bit of a rubble in the car when I apply the brakes, but it only happens between 60km to 50km hour when I am slowing the car down...

I don't feel any pulsing in the peddle, but the car will rubble a but only at that speed...

I don't think it's an issue with the rear drums as i had the issue before and after as i recently replaced my shoes and rear drums...

Thanks guys


Sent from my Z10 using Tapatalk

jack black
08-17-2014, 02:08 PM
I had that in my RAV4 recently (although at much lower speeds) and it turned out pads were wearing unevenly and the slide pin showed some abnormal wear. I assumed from lack of lubrication. I lubed the pin with silicon grease and it helped so far. But I don't have much followup on this.