Misc parts clearance sale - Making garage space for pellets

[CTScott]

My 6 tons of wood pellets for winter heating are coming this week, so I need to clear off my pellet racks, which are currently loaded with car parts.

Prices including shipping are to continental US address. Shipping elsewhere quoted on request.

06-11 Liftback dash cup holder assembly: $7 shipped
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/CupHolder_zps8e5ec8e1.jpg

06-08 Liftback Fog Light Hole Covers: $7 shipped per set (2 sets available)
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/FogCovers_zpsc1bd9e69.jpg

06-11 OEM Radio Aux Jack: $20 Shipped
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/AuxJack_zps8ddada04.jpg

06-11 Liftback Rear Seat Base: $20 + shipping
The perfect base for making a completely flat rear cargo area or sleeping area (without drilling your original rear seat base or if you have 60/40 seats).
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/RearSeatBase_zps2a947089.jpg

06-11 Liftback Front kick panel set: $12 shipped
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/kickpanels_zps88f51a2c.jpg

Exhaust Manifolds: $5 Each + shipping
One has a plug in the O2 sensor hole and the other is without an O2 sensor.
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/Manifold2_zpsec8e9faa.jpg
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/Manifold1_zps55c7d408.jpg

06-11 Gas Filler Door Cable: $5 + shipping
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/GasCapCable_zpsf556ae3e.jpg

06-11 Hood Latch Cable (2 available) $5 each + shipping
http://i372.photobucket.com/albums/oo163/ctscott329/0-Parts/HoodCable_zpse6e1b406.jpg

[CrankyOldMan]

The mud flaps are tempting, but I'm concerned about drilling holes in the bodywork--Michigan uses salt on the roads.

[sickpuppy1]

The mud flaps are tempting, but I'm concerned about drilling holes in the bodywork--Michigan uses salt on the roads.

clear silicone sealant on threads, or a can of undercoating sprayed on the inside( walmart or similar)

[NEexpat]

^Cranky,

It's been a while since I did mine, but if I remember correctly the front muds line with screws already there for the black wheel well plastic protector thing. On the rears you do drill/screw into the plastic rear bumber. I marked the holes, heated up a finish nail and melted pilot holes then screwed them in with and offset screwdriver, or you could remove the rears.

I don't recall drilling into any metal bodywork at all. Scott would know if my recollection is correct.

[CTScott]

^Cranky,

It's been a while since I did mine, but if I remember correctly the front muds line with screws already there for the black wheel well plastic protector thing. on the rears you do drill/screw into plastic. I marked the holes, heated up a finish nail and melted pilot holes then screwed them in with and offset screwdriver, or you could remove the rears.

I don't recall drilling into any metal bodywork at all. Scott would know if my recollection is correct.

The rears go completely into plastic. The fronts do require screwing into sheetmetal. The OEM ones do line up with the fender well holes. These do not.

[Exiwolfman]

ok ..oil cap, horn and micro image pads ...i would like all that please , let me know with shipping to same address as last and same payment method :)

[CrankyOldMan]

The rears go completely into plastic. The fronts do require screwing into sheetmetal. The OEM ones do line up with the fender well holes. These do not.

Ok. I think I'll pass for now. Thanks anyway!

[CTScott]

ok ..oil cap, horn and micro image pads ...i would like all that please , let me know with shipping to same address as last and same payment method :)

PM sent

[Exiwolfman]

Replied

sent from my S4 on Mars

[fnkngrv]

I will take that valve cover and the starter. hit me up on FB since you k ow the shipping drill. :)

[CTScott]

I will take that valve cover and the starter. hit me up on FB since you k ow the shipping drill. :)

Will do.

[Adriaan]

pm sent.

[CTScott]

Added a few more parts

[B2FiNiTY]

nice garage

[CTScott]

More parts added

[CTScott]

Added brake caliper set and removed bumper, which sold.

[Exiwolfman]

Calipers ....shipped can you let me know ...tx

sent from my S4 on Mars

[Exiwolfman]

And are the calipers OEM Toyota? Parts

sent from my S4 on Mars

[CTScott]

And are the calipers OEM Toyota? Parts

sent from my S4 on Mars

Calipers are OEM. It looks like shipping to Canada would be $56. They are way heavier than I would have imagined. Calipers and frames weigh a total of 18.6 lbs.

[Exiwolfman]

Calipers are OEM. It looks like shipping to Canada would be $56. They are way heavier than I would have imagined. Calipers and frames weigh a total of 18.6 lbs.
U got pm
And are the calipers OEM Toyota? Parts

sent from my S4 on Mars


sent from my S4 on Mars

[CTScott]

Calipers are sold.

[CTScott]

Power mirror switch sold.

[Exiwolfman]

Parts arrived ....ty Scott specially for the horn did not know that its an air horn lol its going to be cool making ppl jump .
PS my girlfriend maybe not to happy with the idea ...lmao

sent from my S4 on Mars

[CTScott]

Parts arrived ....ty Scott specially for the horn did not know that its an air horn lol its going to be cool making ppl jump .
PS my girlfriend maybe not to happy with the idea ...lmao

sent from my S4 on Mars

LOL. It's not quite as loud as it looks.

[Exiwolfman]

Think ,hope its as loud as a truck horn lol
Now to wire it ,should I do direct ..one wire from horn and ground it or go through horn realay

sent from my S4 on Mars

[CTScott]

Think ,hope its as loud as a truck horn lol
Now to wire it ,should I do direct ..one wire from horn and ground it or go through horn realay

sent from my S4 on Mars

I would add a relay. You could try a quick test with the OEM wiring and see if the horn fuse blows. The Wolo instructions do not say what the horn actually draws, but it does say to fuse it at 20 Amps, sit is is likely over 10A.

http://www.wolo-mfg.com/419%20english.pdf

[Exiwolfman]

That is what I thought wonder if just replacing the fuse would be OK and the harnest could handle the extra courent

sent from my S4 on Mars

[CTScott]

That is what I thought wonder if just replacing the fuse would be OK and the harnest could handle the extra courent

sent from my S4 on Mars

Considering that the horn is typically used in short bursts, that would probably be OK. Quite a few people have installed dual horn kits without using a relay.

[Exiwolfman]

OK ty ...gone try with stock setup first but think to be safe run a relay ..found your old post on that on how to make it all work on the "stebel nautilus horn"

sent from my S4 on Mars

[CTScott]

Mudflaps are sold.

[07stlYaris]

Got the flaps yesterday. Will install this weekend. Thanks again Scott.

[nobodywise]

Hey Scott! Can the engine cover fit a 2007 sedan 2nz-fe? I'm interested

[CTScott]

Hey Scott! Can the engine cover fit a 2007 sedan 2nz-fe? I'm interested

I believe it will. The 1.3L 2NZ and 1.5L 1NZ share the same valve cover.

[CTScott]

Engine cover is sold.

[nobodywise]

Engine cover is sold.
Engine cover fit perfectly! Just need to get my engine bay cleaned up a bit and I'll bolt it up!

Thanks again!
http://tapatalk.imageshack.com/v2/14/10/05/26f9cb8e200a525d71e127796932ebdb.jpg

I love the back of my car, the front... not so much

[TommyYaris]

Any chance the Front Hubs/Assemblies will fit in an 09 HB? No ABS.

[CTScott]

Any chance the Front Hubs/Assemblies will fit in an 09 HB? No ABS.

Yes they would fit an 09. How do you not have ABS on your 09?

[BIGTAZ351]

I had an evil thought with that hood, I always thought about putting Rally Lights on my hood but don't enjoy the fact that they would permanently leave holes in the hood....I used to work 2:30-11 and wish I had 4 KC Deer-lighters, my wife now drives it at night (3-11) hmmmn......

[CTScott]

I had an evil thought with that hood, I always thought about putting Rally Lights on my hood but don't enjoy the fact that they would permanently leave holes in the hood....I used to work 2:30-11 and wish I had 4 KC Deer-lighters, my wife now drives it at night (3-11) hmmmn......

You need a setup like the Tag Rally Sport Yaris:
http://2.bp.blogspot.com/-7d8Ggw6nOr8/UW2kIj3dANI/AAAAAAAAH-Q/nbwred8VLjc/s640/Tag_Rally_Yaris.jpg

[BIGTAZ351]

OH HELL YEAH!!!!!!!!!!!!!!
I just sent that to my wife on FB....
She likes it!

[CTScott]

OH HELL YEAH!!!!!!!!!!!!!!
I just sent that to my wife on FB....
She likes it!

That's actually a custom light pod that TRS had made. It bolts to the hood and they have it set up where it can easily be removed for races where they don't need it.

[BIGTAZ351]

I wish it was mass-Produced w/Hella Lights, I would seriously consider putting it on...
I have an 2004 F150 and Hella discontinued their Rally 4000 F150 Grille right before I discovered it....no more to be had... :(

[3cyltrbo]

assume the stuff still pictured is still for sale?

if so, how about a combo price / shipped to 13669 for the rear seat base/console and kick panels?

Cheers

Will

[CTScott]

assume the stuff still pictured is still for sale?

if so, how about a combo price / shipped to 13669 for the rear seat base/console and kick panels?

Cheers

Will

Yes. Let me get a weight and measurement on the base and I'll PM you a shipping cost.

[invader166]

I have 2 questions:

1. Do you still have the dome light posted in the first page? The one I currently have has a loose swich that no longer switches on/off/door without me pushing upward on the switch itself. (not sure if that's a common problem or not)

2. Do you ship to canada? I'll pay for extra shipping.:biggrin:

[CTScott]

I have 2 questions:

1. Do you still have the dome light posted in the first page? The one I currently have has a loose swich that no longer switches on/off/door without me pushing upward on the switch itself. (not sure if that's a common problem or not)

2. Do you ship to canada? I'll pay for extra shipping.:biggrin:

I do have the dome light assembly, but it is just the plastic housing with the lever, not the actual light assembly above it (as that was part of the harness)

[invader166]

I do have the dome light assembly, but it is just the plastic housing with the lever, not the actual light assembly above it (as that was part of the harness)

That's perfect! The plastic housing is all I need!

[badverb]

I need to replace a damaged spring on my 2007 liftback. Do you have the springs for sale?

[CTScott]

I need to replace a damaged spring on my 2007 liftback. Do you have the springs for sale?


I just have a set of fronts on hand.

[TommyYaris]

Yes they would fit an 09. How do you not have ABS on your 09?

Canadian model? I have no ABS or Traction control in my 09 LB.

[CTScott]

Canadian model? I have no ABS or Traction control in my 09 LB.

Interesting. It looks like some US ones were made that way as well.

[09sedan]

do you by any chance have the factory steel radio brackets for a 09 sedan?

[mattk_r]

Still got the cup holder. Will the cup holder fit on the front drivers side of my 07 S? My latch is busted.

[CTScott]

Still got the cup holder. Will the cup holder fit on the front drivers side of my 07 S? My latch is busted.

If your 07S is a hatchback it will.

[fnkngrv]

Still got the cup holder. Will the cup holder fit on the front drivers side of my 07 S? My latch is busted.
The bulk of the interior parts of the sedan and LB are different. Very few parts are shared.

Sent from my SCH-I545 using Tapatalk

[ezhacker1]

happen to have a trunk light assembly? i moved mine to the hatch (best thing iv done). but one can never have enough light haha.

[mattk_r]

Ouch - nope, I have the sedan :bonk:

If your 07S is a hatchback it will.

[bronsin]

My 6 tons of wood pellets for winter heating are coming this week

I saw on This Old House where they went to Germany and that's what they use to heat houses...wood pellet fired boilers.

How much does 6 tons of wp's cost?

How many BTUs is that?

Thanks!

[CTScott]

I saw on This Old House where they went to Germany and that's what they use to heat houses...wood pellet fired boilers.

How much does 6 tons of wp's cost?

How many BTUs is that?

Thanks!

I pay between $200 and $250 per ton, depending on the price of gas (as the main factor that effects the pellet cost is the cost to haul them).

For my house I find that a ton of pellets produces the same heat as a 275 gallon tank of furnace oil, for about 1/4 to 1/3 the cost.

[bronsin]

Gee that's great! I go through about 700 gallons of heating oil a year and just a couple years ago we were paying $4.35 a gallon. Now its ~$2.

[Kitt]

the dome lamp is just the clear? Do you have more pictures, if still available?

[CTScott]

the dome lamp is just the clear? Do you have more pictures, if still available?

I thought I still had it, but can't find it.

[aeipee13]

Hey CT,

Do you still have the fog light covers and hood cable?

[CTScott]

Hey CT,

Do you still have the fog light covers and hood cable?

I seem to have sold all of the fog covers, but I do have the hood cable.

[othater]

CT, I sent you a PM yesterday.
Wondering if you still have the AUX jack?
Is it the same for a SedanS 07

[CTScott]

CT, I sent you a PM yesterday.
Wondering if you still have the AUX jack?
Is it the same for a SedanS 07

No. No aux jacks left.