Boostedtrd turbo log!!

[BoostedTRD]

I received my 1NZFE a few weeks ago got it for $250 and it was manual with 90K and now it's time to take apart. This build will take some time so bare with me. I will finish taking it apart tomorrow.

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/E7C40C83-4309-4CAF-9381-6432E4680ED7_zpsdc2yerf6.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/E7C40C83-4309-4CAF-9381-6432E4680ED7_zpsdc2yerf6.jpg.html)

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/E32354A6-4DE5-47E3-8C5D-2C393D7773BF_zpspo2h7icm.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/E32354A6-4DE5-47E3-8C5D-2C393D7773BF_zpspo2h7icm.jpg.html)

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/D10E5515-2437-49BC-9B3A-D544DA2EDF21_zps4iql6w1d.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/D10E5515-2437-49BC-9B3A-D544DA2EDF21_zps4iql6w1d.jpg.html)

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/F0921ACC-8AFC-45DA-9EAB-E5BFD43427A8_zpsfb7frkyg.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/F0921ACC-8AFC-45DA-9EAB-E5BFD43427A8_zpsfb7frkyg.jpg.html)

[LTHatch]

Fantastic! Please take tons of pictures my good sir!

[BoostedTRD]

Fantastic! Please take tons of pictures my good sir!

Will do!!!:headbang:

[BoostedTRD]

So I finished taking the engine apart. I will send it to the machine shop sometime this week.

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/0366C711-F5FE-4EC4-A28A-4AE707D15659_zpsphpmobfk.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/0366C711-F5FE-4EC4-A28A-4AE707D15659_zpsphpmobfk.jpg.html)

http://i1372.photobucket.com/albums/ag346/Rolex1603/Mobile%20Uploads/2014-08/2915CC75-2E42-4A5F-9F14-EBA63689A93F_zpstgjr8mim.jpg (http://s1372.photobucket.com/user/Rolex1603/media/Mobile%20Uploads/2014-08/2915CC75-2E42-4A5F-9F14-EBA63689A93F_zpstgjr8mim.jpg.html)

[ilikerice]

Sweet. I love build threads..
I may have missed it in another thread. Whats the plans for this one?

[BoostedTRD]

Sweet. I love build threads..
I may have missed it in another thread. Whats the plans for this one?

I am glad you asked :biggrin: My HP Goals are 300+

Build Plans:

Head:

-Port & Polish

-Supertech Scion TC valve springs and retainers (good results according to Blown_xa)

-Stock Valves since I can seem to find anyone that makes over sized valves

- Golden Eagle intake manifold with 1zz Throttle body

Block

-CP Pistons 9.5:1
-BC Rods
-ARP Head Studs
-Factory Head Gasket
-Factory Main Bearings.
-Factory Rod Bearings.
-Factory Thrust Bearings.
-OEM Rear Main Seal.

Fueling-

Golden Eagle Fuel Rail with Fuel Pressure regulator
Walbro 255 Fuel pump
Denso 550cc injectors
whatever else I need to make the fuel return system

Clutch

-ACT 6 Puck Clutch

Exhaust

-Custom

Tuning

-Will be done by Ptuning since they tune Blown_xa car and he was tuned with Haltech sprint 500 and that's what I have.

[ilikerice]

http://www.yarisworld.com/forums/showthread.php?t=34573&highlight=valves

I know these were sold already, but did you check this company out?

I could have sworn Garm had some up in his online store before. Have you talked to him also? Maybe he knows someone.. worth a shot if not being able to find them is the issue and money isn't.

[BoostedTRD]

http://www.yarisworld.com/forums/showthread.php?t=34573&highlight=valves

I know these were sold already, but did you check this company out?

I could have sworn Garm had some up in his online store before. Have you talked to him also? Maybe he knows someone.. worth a shot if not being able to find them is the issue and money isn't.

Thanks for this. I will ask to see if they have them in stock and to see how much of a difference will make to justify the $400.

[Blown_xa]

looks good man. When it comes time to assemble the motor I will give you a heads up about a couple things. Those ARP head studs will require small modification to a couple of things for fitment

[Bluevitz-rs]

won't you need to do some machining to accommodate larger valves if you do decide to go that route anyway? I'd assume a larger valve will require a larger diameter port and larger seat to work effectively.

[BoostedTRD]

looks good man. When it comes time to assemble the motor I will give you a heads up about a couple things. Those ARP head studs will require small modification to a couple of things for fitment

Thanks bro, I really appreciate your help with my build. Mad props to you

[BoostedTRD]

won't you need to do some machining to accommodate larger valves if you do decide to go that route anyway? I'd assume a larger valve will require a larger diameter port and larger seat to work effectively.

Yup your right, I don't if its even worth the time and money to get larger valves installed, unless they give you some sick hp gains.

[Ryze268]

So many builds start off great then go silent, I will admit that I'm guilty of this too

[fnkngrv]

So many builds start off great then go silent, I will admit that I'm guilty of this too


time for this kind of stuff is always a factor as well as getting pictures moved and hosted, etc. posting progress is time consuming as well. hopefully we will see more on this soon as I enjoy them myself. I will be curious about the turbo setup and exhaust manifold choice.