Blitz for parts or repair.

[07stlYaris]

I have the Blitz that Tolmach (look up posts) had from an xb. The clutch bearing spun on the snout so it will need either a fixed pulley or a sleeve where the clutch bearing sits. The supercharger spins fine and boosted even with the aforementioned bearing problem. I'm selling it as used for parts so theres no issue regarding the fact that its needing some work. I'll take $500 shipped anywhere in the lower 48. Let me state this again, it NEEDS a bit of work to make it fully functional again. Do not buy unless you have access to a machine shop. I'll include the blitz fmc and bracketry so all you need to do is fix the snout and you should be good to go.

[Bluevitz-rs]

any pictures of the issue?

[07stlYaris]

Sold. No pics but if you've ever seen the snout without the clutch, it has 2 snapring grooves (inner for the stator and outer for the rotor). The area on the top of the snout where the rotor bearing sits (in between the grooves) is now a few thousandths smaller making the bearing wobbly on the shaft.

[ezhacker1]

wow that was quick. the entire install hardware even with the required fix, such a cheap price