View Full Version : Calling all Stanced Yari!
Thebigwicks
04-20-2015, 04:33 PM
Hello to all you stance freaks out there. I'm starting this tread to see what tires,
wheels, and suspension mods you all have do in order to get a proper "stance." I wanna see everything from tire stretch, wheel specs, and even what amount of camber you are running. Pictures are worth a thousand words so let's get those as well.
ilikerice
04-21-2015, 05:20 AM
Define "stance"
This is Autocross stance
205/50 on 15x7.5 30offset
-2.8 front camber
Spec rear camber
ilikerice
04-21-2015, 05:21 AM
This is Track Stance with R-comps
225/45 on 15x7" 40offset
-2.8 front camber
Spec rear camber
ilikerice
04-21-2015, 05:27 AM
Test fit off my friends CRX
195/55 on a 15x7 with 0 offset
Spec front and rear alignment
Lots of rubbing. Only had on for a week. no like
ilikerice
04-21-2015, 05:29 AM
My DD Stance for a long time
195/55 on 15x7.5 30offset
-2.8 camber frong
spec rear camber
Slight rub in the rear with 3+ passengers
WeeYari
04-21-2015, 11:28 AM
Best be doing a lot of searching. Most members of Stance Nation not posting anymore. One of the nicest belongs to G-Ammo.
Thebigwicks
04-21-2015, 01:22 PM
Nice! That's what I want to see. I think anything from fender mods to springs rates are relevant. You see, the term "stance" is such a relive not term. I'm so tired of people bashing others for not having a "proper stance." Someone's "stance" can be anything from being lowered on stockies, to being full blown out indo style to where your car looks like a hover craft. I would just like to see a thread where people's ideas about what looks good on THEIR cars to be considered "right" by them and not bashed. Also I think it would be a good starting point for someone who was thinking about getting into the "stance" scene. Say they liked ilikerice's DD stance. Well bam! They now have all the information (or at least a good bit of it) that they would need in order to head in the direction of THAT "stance."
check out my build thread and you will wind up finding a lot of info you're looking for.
07 sedan 5spd Non S
suspension: Megan coilovers, 9kg 150mm Swift springs front, 6kg 130mm Megan springs rear, Ingalls camber bolts, Realcamber.com rear shims
Wheels: BBS RS 16x9 +18 16x10 ~10-12, 205/40/16 w/ spacers
Front -1.5 camber
Rear -6/-9 camber (ran 1 or 2 shims)
LOTS OF BODY/FENDER WORK, LOTS OF CUTTING
A lot more to it than only that but its the basics to get me where I was
Here are some pics
55287
55288
55289
55290
55291
55292
yarisugi
04-21-2015, 04:12 PM
^^^ right there.
http://media.giphy.com/media/b8kHKZq3YFfnq/giphy.gif
/end thread
MUSKOKA800
04-28-2015, 05:19 PM
WOW!! :eek:
Not driving that 100 yards on the mean streets of Ontario, Canada. Mine scraps frequently with only a TRD suspension drop and a heap more fender clearance.
check out my build thread and you will wind up finding a lot of info you're looking for.
07 sedan 5spd Non S
suspension: Megan coilovers, 9kg 150mm Swift springs front, 6kg 130mm Megan springs rear, Ingalls camber bolts, Realcamber.com rear shims
Wheels: BBS RS 16x9 +18 16x10 ~10-12, 205/40/16 w/ spacers
Front -1.5 camber
Rear -6/-9 camber (ran 1 or 2 shims)
LOTS OF BODY/FENDER WORK, LOTS OF CUTTING
A lot more to it than only that but its the basics to get me where I was
Here are some pics
55287
55288
55289
55290
55291
55292
sasquatch
04-28-2015, 05:32 PM
http://images.tapatalk-cdn.com/15/04/28/cf21973b14c2ce4321da25a5a63b2649.jpg
Posting on behalf of dinoeggxo
Air Force front struts
Air lift universal double bellow rear bags
Air lift autopilot v2 management
Air setup hidden in the spare tire well so the trunk is fully functioning.
15x7.5 front 15x8.5 rear BBS RM. 155/55/15 front tires, this picture has 195-45-15 rears but will be 175/60/15 this year
Sent from my iPhone using Tapatalk
Thebigwicks
04-29-2015, 03:46 PM
Awesome. I guess now I have to upload mine on here so everyone can criticize me and call me a ricer! haha
coheed
04-29-2015, 10:28 PM
http://i.imgur.com/M92wNPg.jpg?1
http://i.imgur.com/TivqahK.jpg
Air over bags on Megan coilovers.
15x7 et 36 front/ et 11 rear with 185/55's all around.
Hey! If i recall correctly, that was my air setup ^^^^ looks awesome man!
Thebigwicks
05-01-2015, 12:39 AM
17x7's with 25mm spacers in the rear.
Thebigwicks
05-01-2015, 12:42 AM
-3 camber shims with 1 washer on the rear for some extra "ump"
Thebigwicks
05-01-2015, 12:44 AM
Had to do a slight fender pull as well.
Thebigwicks
05-01-2015, 12:49 AM
Had to grind down the rear seem on the rear fender well. Running 205/40/17. No stretch=no clearance. On Megan coilovers with 6k springs up front and 4k in the rear. Had to cut a bit of plastic on the rear bumper and some of the plastics in the front wheel arch.
TerenceCruz
06-17-2015, 09:37 PM
Don't know if I'm super late or whatever, but yeah.. Haha
http://i.imgur.com/i8oSdJTl.jpg
http://i.imgur.com/PkgHsVVl.jpg
- Megan coilovers: 16x8.5 +25 JNC 004s. (+15 in the rear because of hub spacers)
- Upgraded to 6" 10k and 5" 8k Swift springs
- Two pairs of camber bolts - Have the fronts at about -2.7 camber
- 10mm PG Hub spacer, along 3 washers on each of the lower bolts in the rear, about 3 camber.
- Dampening set to 28.
WorkTL
06-18-2015, 06:48 PM
55562
55563
SSR MK III
15x8 +13 front
15x8 -0 rear
155/60R15
-3 front
-5 rear
Tein coilovers
fender roll & pull
**upgrading to Swift springs to go lower like T Cruz!
aeipee13
08-08-2015, 04:22 PM
whats the size spec on the washers used to camber the rear? I bought my spacers years ago and didn't install the washers, which are now lost.
WeeYari
08-09-2015, 10:16 AM
whats the size spec on the washers used to camber the rear? I bought my spacers years ago and didn't install the washers, which are now lost.
You go to Home Depot and get stainless steel washers with a 1/2" center hole. You need to file a flat on the edge of the washer so it will clear the hub.
Sent from my iPhone using Tapatalk
coheed
10-15-2015, 08:58 PM
Forgot I had these pictures. From left to right 15x8 et20, 16x8 et0, and 17x9 et20. Mine and the red one were on Megan's and the green one was on BC's.
http://i.imgur.com/2w27tsQ.jpg
And from the front.
http://i.imgur.com/fJHS2WE.jpg
aeipee13
11-08-2015, 02:23 AM
You go to Home Depot and get stainless steel washers with a 1/2" center hole. You need to file a flat on the edge of the washer so it will clear the hub.
Sent from my iPhone using Tapatalk
thanks!
aeipee13
11-08-2015, 02:32 AM
http://i.imgur.com/2w27tsQ.jpg
And from the front.
http://i.imgur.com/fJHS2WE.jpg[/QUOTE]
your set up is nice! whats the tire specs? I was thinking of going 15x8...
https://flic.kr/p/pWLepB
coheed
11-08-2015, 03:51 AM
your set up is nice! whats the tire specs? I was thinking of going 15x8...
https://flic.kr/p/pWLepB
Tires were 195/55's.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.