Yaris exhaust

[jari93]

Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?

[RWJC]

Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?

i cut the stock off, used flex pipe, clamped and taped; used a resonator tip & taped. Sounds great. About $35.

[scod4025]

Just a heads up for you if you look at Stickys above, you will notice that there is a whole thread on the Custom Exhaust

But also I am running a 2" cat back system I'm at about $600 into it with out the headers and probably $200 more on the headers

[tooter]

I'm running a Weapon R header...

http://i17.photobucket.com/albums/b90/compost_bin/car/IMG_5910.jpg

...with a Micro Image Magnaflow center exit exhaust.

http://i17.photobucket.com/albums/b90/compost_bin/car/IMG_7316_zps9461223c.jpg

It sounds great! The total cost was about $600 and well worth it. :smile:


Greg

[IllusionX]

Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?

I have an exhaust for sale for the sedan if you are interested.

[crazylegs]

i'm looking at the OBX header with header-back i keep seeing on ebay. looks like a good bang for your buck. most likely loud as hell

[enviri]

I got a TRD header

http://i50.photobucket.com/albums/f332/xienji/WP_20140505_11_44_08_Pro.jpg

with a fujitsubo Wagolis exhaust.

http://i50.photobucket.com/albums/f332/xienji/wagolis/IMG_0381.jpg

It sounds great! Not loud at all, no subie like burble from the stock header.
parts cost was like..1100-1200$, no labor cost. JDM yo.

[LTHatch]

Good lord Enviri, do you have any sound clips of your combo?

[zen]

2" Straight Pipe from Cat-back to 2 1/2" Tip....too loud, deep growl from 0-4.5k, anything more than that starts sounding ricey. $40 install including pipe/muffler from local shop.

[crazylegs]

Just curious what are my options for exhausts that are larger then 2" I know obx is 2.25" but what else is The same or bigger.

I'm also looking for a deep lower pitch tone and was told A nice longer tube resonator would help get rid of the higher pitch ricey tones.

[paulge3]

I bought a Magnaflow catback from Exhaust Kit (http://4wheelonline.com/Exhaust_Kits.17)|4wheelonline. Hopefully I will have the time to install it next week. The piping is 2.25 inch and tip is 3.5". Bought one because my buddy has this exhaust and it has a nice deep tone.

[crazylegs]

Thanks for the info I just got in the weapon R header and was disappointed that it only had a 2" out I swore I read it had a 2.5" collector which made me assume that ment 2.5" outlet bit I guess I was wrong.

What flows better 2.5" crush bent or 2.25" mendrel bent I assume. The obx is mendrel bent.

Thinking of getting the OBX exhaust for the header back piping and change to a magnaflow muffler to get a nice low tone from the exhaust.