MustiRauf
06-27-2015, 05:22 PM
HI all. So bought this 07 Vitz a month back. had clocked 80k but it's in pretty good nick. There are a few issues but nothing major.
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576590d1432039820-bought-vitz-finally-11286518_10206736218582284_902127098_o.jpg
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576589d1432039028-bought-vitz-finally-11297421_10206736217662261_336821147_o.jpg
Anyways, been doing a few DIY's and thought I might ask.
1) My car came equipped wit the plastic 3 spoke steering wheel. I hate the feel so bought a leather steering from the junk yard. The steering didnt come with the airbag module and I thought I could just pop the one in from the current steering and replace it with the l/steering.
Problem is, I noticed the airbag is held by 2 screws at the side of the plastic steering while the leather steering dose not have any screw hole in the sides. Can I still make the switch or do I have to get a new air bag module (possibly with the steering control switches)?
The original plastic steering
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576608d1432040493-bought-vitz-finally-11293301_10206736218662286_1393942797_o.jpg
The leather steering I bought from a JY
http://www.pakwheels.com/forums/attachments/vitz-yaris/1586516d1434446802-bought-vitz-finally-img_20150616_124220.jpg
You can notice there are no screws at the sides of the steering cover.
http://www.pakwheels.com/forums/attachments/vitz-yaris/1586517d1434446852-bought-vitz-finally-img_20150616_124231.jpg
is this the kind of airbag and control I need to buy for the new steering?
http://cache4.pakwheels.com/ad_pictures/690/toyota-vitzbelta-multimedia-steering-control-switches-pad-6905456.jpg
2) My car also didnt have any fog lights so just for the heck of it, I bought some cheap chinese fogs. The bulb in one of the houseings busted on the first day and the output is pathetic.
Anyways, a friend has some valeo (Belgium) fog lights with Osram h11's. Was thinking if they would fit in the stock housings? I asked him the dia and he said they were 3.5".
The valeo fogs that my friend is selling
http://cache2.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773652.jpg
http://cache4.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773654.jpg
http://cache1.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773656.jpg
Any help would be great :help:. Thanks alot guys
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576590d1432039820-bought-vitz-finally-11286518_10206736218582284_902127098_o.jpg
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576589d1432039028-bought-vitz-finally-11297421_10206736217662261_336821147_o.jpg
Anyways, been doing a few DIY's and thought I might ask.
1) My car came equipped wit the plastic 3 spoke steering wheel. I hate the feel so bought a leather steering from the junk yard. The steering didnt come with the airbag module and I thought I could just pop the one in from the current steering and replace it with the l/steering.
Problem is, I noticed the airbag is held by 2 screws at the side of the plastic steering while the leather steering dose not have any screw hole in the sides. Can I still make the switch or do I have to get a new air bag module (possibly with the steering control switches)?
The original plastic steering
http://www.pakwheels.com/forums/attachments/vitz-yaris/1576608d1432040493-bought-vitz-finally-11293301_10206736218662286_1393942797_o.jpg
The leather steering I bought from a JY
http://www.pakwheels.com/forums/attachments/vitz-yaris/1586516d1434446802-bought-vitz-finally-img_20150616_124220.jpg
You can notice there are no screws at the sides of the steering cover.
http://www.pakwheels.com/forums/attachments/vitz-yaris/1586517d1434446852-bought-vitz-finally-img_20150616_124231.jpg
is this the kind of airbag and control I need to buy for the new steering?
http://cache4.pakwheels.com/ad_pictures/690/toyota-vitzbelta-multimedia-steering-control-switches-pad-6905456.jpg
2) My car also didnt have any fog lights so just for the heck of it, I bought some cheap chinese fogs. The bulb in one of the houseings busted on the first day and the output is pathetic.
Anyways, a friend has some valeo (Belgium) fog lights with Osram h11's. Was thinking if they would fit in the stock housings? I asked him the dia and he said they were 3.5".
The valeo fogs that my friend is selling
http://cache2.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773652.jpg
http://cache4.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773654.jpg
http://cache1.pakwheels.com/ad_pictures/477/original-valeo-foglights-osram-connectors-made-in-belgium-4773656.jpg
Any help would be great :help:. Thanks alot guys