Hi and Low Beam at the same time trick

[07HBYaris]

I have figured out this neat little trick with the Yaris years ago. It makes a world of difference at night. I also adjust my left and right head lights just a tad.

It's about time I shared this.
Note: It takes some dexterity to get it right.

All you have to do is move the lever inbetween the hi and low beams. If you get it just right it'll stay.

I noticed the more I did this the more it stayed. In the beginning, the lever would get knocked back to low beam with just a small bump in the road. But after doing this for years, my lever now has technically 4 options. I say, mines sturdy enough to stay in place for indefinitely on typical roads.

toggle hi beam
hi & low combo beam :tweetz:
lo beam
hold hi beam

I have done this since the day I figured out this trick back in 2008-9, and now you can have both filaments on. I Never had any had premature lights wear. no popped bulbs or melted housing. No negative consequences.

I only used plain old halogen one. Not the cheapest, not the fanciest, just the most OEM looking ones.http://www.yarisworld.com/forums/images/smilies/thumbsup.gif

[Exiwolfman]

ya till you blow ur relay or melt something

[MadMax]

^^ Yep! ^^

[tmontague]

I'm assuming you drive on a lot of rural roads and need the extra lighting? Other than that I can't image why one would need more than a simple high beam...definitely not on day to day well traveled roads.

[Squid111999]

Came across this months ago and game it a shot. Its a fun little trick to show off and I feel is pretty handy on windy roads. Thanks for the tip

Sent from my XT1254 using Tapatalk