FS: COMPLETE turbo kit for yaris

[0BD1Kenobi]

SOLD SOLD SOLD SOLD

I’ve decided to put my turbo kit up for sale to start another project car (AE86) and leave my “daily” alone, at least for the time being. The turbo kit is as complete as it gets including fuel, management gaskets, lines, piping, couplers, clamps, gauges, exhaust, etc… I am motivated to sell as soon as possible; I will work on price for a serious buyer. The kit contents are as follows.

-Garrett GT2860RS Ball Bearing (oil and water cooled)

-38mm Tial Wastegate

-Custom Charge Pipes

-Custom Turbo Manifold (just had it braced and rewelded pictures of manifold are before I sent it out. I should have it back this week)

-3 inch V-Band down Pipe

-Brand new intercooler

-Synapse Blow off Valve

-Haltech Sprint 500

-Boomslang plug and play harness

-Brand new Vibrant Oil Feed Line with fitting to attach to block were oil pressure sensor goes (retains oil pressure sensor also)

-1ZZ 560cc Injectors

-Water lines for turbo including new Banjo Fittings bolts, and crush washers

-Brand new Remflex Gaskets for turbo to manifold, manifold to waste gate, and waste gate to dump tube

-Brand New Vibrant Pitpack of Black Vacuum Hoses

-Brand New Mishimoto Oil Catch can includes hoses mounting plate and magnetic drain plug

-Brand New Vibrant Vacuum Block Black

-Brand New Fitting to tap upper oil pan for return (also have a new cap to cap it off if you remove the turbo kit)

-Greddy Coolant Temp sensor adapter pipe for coolant hose (no sensor or gauge)

-Brand new Innovate Vacuum/Boost Gauge with integrated shift light

-Brand new Innovate MTX-L Wideband

-Hand full of brand new vibrant v band flanges and clamps 2.5” and 3” (also have used ones that are included)

-Brand New Vibrant concentric reducer from 3” to 2.5” (downpipe is 3” but have everything to make a 2.5” cat back exhaust that will mate right up)

-Brand new Vibrant 2.5” piping

-Brand new Blox racing 2.5” Mini Race Muffler

-Brand new Haltech intake air temp sensor

There’s more I’m forgetting but this is what I can remember off the top of my head. Everything stated brand new is still in its original packaging. If serious buyer wants to take things out of the kit to adjust price we can do that too. Any questions feel free to post or message me. The sooner I sell the kit the sooner I can put together an 86 corolla!

[0BD1Kenobi]

i should have mentioned everything bolts right up and is ready to go other than the catback exhaust. the piping and muffler need to be put together

[0BD1Kenobi]

Price is obo someone make an offer!

[Black_griffin6]

If I wasn't already running the zage kit, i'd be all over this.

[CTScott]

Soooooo tempting to turn mine into the world's first dual charged Yaris.

[07dirtyaris]

I think you should go for it CTScott!! :thumbup:

[0BD1Kenobi]

do it! and your not that far away from me so we really dont need to ship, i have everything at my shop in rhode island. pm me if your interested we can figure out what stuff you want and dont and can work on price

[0BD1Kenobi]

well upon further review of the boomslang harness and my 2012 se it seems that the harness wont fit my car so i have no use for it. buyers with 2012 and up yaris beware boomslang harness list that they fit every year but upon inspection on alldata ecm connectors changed from somewhere in 2012 and for every year after that. KIT IS OBO SOMEONE BUY PLEASE lol

[CTScott]

Correct. That boomslang is for 06-11.

[tmontague]

I'd love to make you an offer but with where I live I need to pass an OBD e test. Only way to do that is to do that is to have a car with an ECU that is flashable.

I hope someone picks this up

[0BD1Kenobi]

It wouldnt pass even with the factory ecu still in car?

[tmontague]

Nope the standalone would cause the stock ecu to read all kinds of codes with pushing boost and everything else.

Would need a way to re flash the stock ecu and turn off certain CEL's which no one has yet to do

[CTScott]

Nope the standalone would cause the stock ecu to read all kinds of codes with pushing boost and everything else.

Would need a way to re flash the stock ecu and turn off certain CEL's which no one has yet to do

The Haltech Sprint 500 is a piggyback, so the stock ECU would remain in place. As long as the two O2 sensors are left installed, as well as all of the emissions related gear, passing OBD emissions is very possible.

[tmontague]

My mistake I thought the Haltech 500 was a stand alone.

That said, the stock ecu would still be throwing CEL's for boost would it not?

[KTS]

The parts in this kit are top quality. This is a much better kit than a zage kit. I hope CTScott buys this and makes a duel boosted yaris with 300+ whp easy.
This kit is the dream wish I could buy it. This will definitely sell to a very happy customer.

[CTScott]

My mistake I thought the Haltech 500 was a stand alone.

That said, the stock ecu would still be throwing CEL's for boost would it not?

As long as the piggyback is setup correctly it won't. With the 6 lbs of boost of the Blitz S/C, I have no problem with OBD emissions here in CT, and never have the CEL come on.

[0BD1Kenobi]

The Haltech Sprint 500 is a piggyback, so the stock ECU would remain in place. As long as the two O2 sensors are left installed, as well as all of the emissions related gear, passing OBD emissions is very possible.

as ctscott said, all emission would stay in place, and downpipe has bungs for factory o2 sensors. so all factory sensors would remain intact. i work at a garage in rhode island and i belive i have a 02 defowler at my shop and can throw it in the kit for free for anyone afraid of getting a secondary o2 code. Ive used them multiple times on my personal cars and customers cars and they work great for catless vehicles. My evo x was 3" turbo back and i still passed inspection in massachusettes where they plug into the obd2 port.

[0BD1Kenobi]

Thanks everyone for the interest and feedback on the kit hopefuly it sells and goes to a good home, id like to see it get put to use!

[brushforhire]

Any pics of the exhaust manifold?

[0BD1Kenobi]

Ive slacked on picking it up from my welder i will get itnthis week coming up. I do have a picture of it before i had all the welds and bracing done ill post up for reference

[0BD1Kenobi]

heres is pic of manifold before i sent it out. ill post new pics soon as i grab it.

[0BD1Kenobi]

would any one be interested if i take out a few universal parts such as gauges and catch can to lower price. im motivated to sell this kit and willing to come down to 2500 obo

[LittleM@n]

Do you have an intake to go with the kit?

[0BD1Kenobi]

i do have an intake to go with it, and i believe it is in the 12th picture down for the top. Also everything is provided in the kit to delete maf sensor and run map sensor. Any other questions feel free to message me.

[0BD1Kenobi]

bump for price change manifold comes back this friday all welds redone, and braced to support weight of turbo. took a lttle longer to get back than expected.

[Black_griffin6]

I've been really eyeing this because I would like to eventually upgrade from the Zage kit.
Did you ever install this kit?

[0BD1Kenobi]

pm'd!

[0BD1Kenobi]

i havent had any offers on the kit yet, would there be any interest if i part it out?

[tmontague]

I'd hate to see this awesome potential build be parted out. It has everything you'd need for a great diy turbo build. If only I wasn't a poor student and I had another car to DD...

[CrankyOldMan]

Damn, I'd love to get this and twin charge the 1NZ that's slated to go in the MR2. Any chance you'd be interested in the 4AGE that's coming out? It needs some TLC, but it still runs.

[0BD1Kenobi]

as of right now im only interested in cash offers but i do apperciate the offer!

[0BD1Kenobi]

im now in full part out mode if anyone wants to make any offers on anthing, or will let go of full kit for a crack head price. Someone low ball me lol

[vivalaflam]

Will it fit the 1.3? Would you ship to Greece?

[py4age]

Would you be interested in some ae86/4age parts + cash on my hand? just feeling

[0BD1Kenobi]

finaly have the manifold back! here are some pics!

as for fitting the 1.3 i do not know.

as for 4age parts plus cash id like to hold off for at least the time being till i pick up the ae86 and see what it needs.


thank you both for the interest

[0BD1Kenobi]

potential buyer on manifold turbo waste, anyone want to lowball me on complete kit?

[CrankyOldMan]

I wouldn't have the funds for at least a month, and even then they're allocated to a 2ZR swap. =(

[0BD1Kenobi]

KIT IS SOLD!!

[tmontague]

Congrats man. Does the buyer mind posting who they are, curious if the don't mind posting their build

[0BD1Kenobi]

idk if hes on here or not, hes local to me. i do know hes on the yariz/vitz world wide page on face book his name is ralphy

[Black_griffin6]

idk if hes on here or not, hes local to me. i do know hes on the yariz/vitz world wide page on face book his name is ralphy
Is this him?

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xla1/t31.0-8/10636566_10154638334609237_3251316119355889976_o.j pg

Not gonna lie man, that kinda pisses me off to see it immediately sold again.

[fnkngrv]

Yes that is the same one Alex

Sent from m-o-b-i-l-e