PART OUT: 2012 Yaris Hatch - local pickup preffered

[zackt69]

EDIT: Prices lowered -

I'm selling my 2012 Yaris hatch, took off the few parts I had on it and am putting them up for sale. The car was used by Tanabe USA during for R&D, so the Tanabe parts were installed by them.

The exhaust and coilovers are big and heavy, so I'd prefer not to ship those. I'm located in Pasadena CA and can meet up within a reasonable distance. The shift kit and strut tower bar can be shipped at buyers expense, but local pickup is definitely preferred. Please don't hesitate to contact me with any questions.

Contact: PM me on here or email me zackt69@hotmail.com

Tanabe Sustec Pro S-0C coilovers - $350 (was $400)
Tanabe Part#TSC168
These have about 25,000 miles on them, mostly freeway driving. I don't have the original printed materials, packaging or the spanner wrenches.
Write up of coilover install on my car by Tanabe (http://www.tanabe-usa.com/rnd/post/Tanabe-Sustec-Pro-S-0C-on-2012-Yaris.aspx)

Tanabe Strut Tower Bar - SOLD
Tanabe Part#TTB121F
I don't have the original printed materials or packaging.

Tanabe Medalion Touring Exhaust - SOLD
Tanabe Part#T70121A
I don't have the original printed materials or packaging.
Write up of exhaust install on my car by Tanabe (http://www.tanabe-usa.com/rnd/post/Medalion-Touring-for-2012-Yaris.aspx)

MI Short Shift Kit - SOLD
I installed this and didn't like it. Took it off after probably 1 mile of driving and it's been sitting in the garage ever since. I don't have the original printed materials or packaging.

Coilovers
http://circuitspec.com/sale_items/zack_co_001.jpg
http://circuitspec.com/sale_items/zack_co_002.jpg
http://circuitspec.com/sale_items/zack_co_003.jpg
http://circuitspec.com/sale_items/zack_co_004.jpg

One of the front dust boots is folded in
http://circuitspec.com/sale_items/zack_co_005.jpg
http://circuitspec.com/sale_items/zack_co_006.jpg
http://circuitspec.com/sale_items/zack_co_007.jpg

Rear shock has paint scratch, shock body is not damaged
http://circuitspec.com/sale_items/zack_co_008.jpg

Spring has a chip
http://circuitspec.com/sale_items/zack_co_009.jpg
http://circuitspec.com/sale_items/zack_co_010.jpg

Rear shock has paint scratch, shock body is not damaged
http://circuitspec.com/sale_items/zack_co_011.jpg

Exhaust
http://circuitspec.com/sale_items/zack_ex_001.jpg
http://circuitspec.com/sale_items/zack_ex_002.jpg
http://circuitspec.com/sale_items/zack_ex_003.jpg

Small scratch on the exhaust body. Upper part and is hidden by rear bumper.
http://circuitspec.com/sale_items/zack_ex_004.jpg

Strut Tower Bar
http://circuitspec.com/sale_items/zack_stb_001.jpg
http://circuitspec.com/sale_items/zack_stb_002.jpg
http://circuitspec.com/sale_items/zack_stb_003.jpg
http://circuitspec.com/sale_items/zack_stb_004.jpg

Short Shift Kit
http://circuitspec.com/sale_items/zack_ss_001.jpg
http://circuitspec.com/sale_items/zack_ss_002.jpg
http://circuitspec.com/sale_items/zack_ss_003.jpg
http://circuitspec.com/sale_items/zack_ss_004.jpg

[sarap]

Damn ! I just bought coils. I want these though !

[sr20-thoj]

Will the strut bar fit a 2008?

[zackt69]

Will the strut bar fit a 2008?

On the Tanabe site the same part number is listed for 07-11 that's listed for 12... so I'm guessing it should be the same part and fit 07-12.

http://www.tanabe-usa.com/towerbar.asp

[pdaoaudio]

still have the coil overs?

[zackt69]

Lowering prices a little -

I'm selling my 2012 Yaris hatch, took off the few parts I had on it and am putting them up for sale. The car was used by Tanabe USA during for R&D, so the Tanabe parts were installed by them.

The exhaust and coilovers are big and heavy, so I'd prefer not to ship those. I'm located in Pasadena CA and can meet up within a reasonable distance. The shift kit and strut tower bar can be shipped at buyers expense, but local pickup is definitely preferred. Please don't hesitate to contact me with any questions.

Contact: PM me on here or email me zackt69@hotmail.com

Tanabe Sustec Pro S-0C coilovers - $450
Tanabe Part#TSC168
These have about 25,000 miles on them, mostly freeway driving. I don't have the original printed materials, packaging or the spanner wrenches.
Write up of coilover install on my car by Tanabe (http://www.tanabe-usa.com/rnd/post/Tanabe-Sustec-Pro-S-0C-on-2012-Yaris.aspx)

Tanabe Strut Tower Bar - SOLD
Tanabe Part#TTB121F
I don't have the original printed materials or packaging.

Tanabe Medalion Touring Exhaust - SOLD
Tanabe Part#T70121A
I don't have the original printed materials or packaging.
Write up of exhaust install on my car by Tanabe (http://www.tanabe-usa.com/rnd/post/Medalion-Touring-for-2012-Yaris.aspx)

[zackt69]

Lowering price a little -

I'm selling my 2012 Yaris hatch, took off the few parts I had on it and am putting them up for sale. The car was used by Tanabe USA during for R&D, so the Tanabe parts were installed by them.

Coilovers are big and heavy, so I'd prefer not to ship those. I'm located in Pasadena CA and can meet up within a reasonable distance. Please don't hesitate to contact me with any questions.

Contact: PM me on here or email me zackt69@hotmail.com

Tanabe Sustec Pro S-0C coilovers - $400 (was $450)
Tanabe Part#TSC168
These have about 25,000 miles on them, mostly freeway driving. I don't have the original printed materials, packaging or the spanner wrenches.
Write up of coilover install on my car by Tanabe

[zackt69]

Bump, still have coilovers... price lowered to $350 picked up from Pasadena, CA