My Bayou blue yaris.. nothing special..

[Imagine]

Well, here it is..
- Removed hub caps
- Debadged rear end
- Hidden hitch reciever for bike rack

More stuff coming when I get some monies.

http://gallery.digitaldeviation.com/d/3929-4/me+038.jpg

http://gallery.digitaldeviation.com/d/3932-4/me+039.jpg

http://gallery.digitaldeviation.com/d/3935-4/me+040.jpg

http://gallery.digitaldeviation.com/d/3938-4/me+041.jpg

[Blenjar]

aww its cute <3

DOes that make u feel better?

-- Blen

[Blenjar]

First thing first. TRD spring..
go to trdspark.

-- Blen

[msagowitz]

Where in Ohio do you live, and what kind of bike?

[blacksan]

Tell me more about the bike rack hitch.

BTW, here is what the steelies look like with the center cap.

[uncleyaris]

It is special, it's BAYOU. I post some pics when I get my JDM RS TAILS installed. I think I'll be the first BAYOU to have them. Remember you gotta start somewhere, and it's about the $$$$. Good luck

[blacksan]

The longer I have this car the more I like the color. The next pick would have been white.

[uncleyaris]

or the green like JIMCATS, if it was offered. I think a canary yellow would look good too. But the BAyou looks different in different light thats why i LOVE IT!

[blacksan]

or the green like JIMCATS, if it was offered. I think a canary yellow would look good too. But the BAyou looks different in different light thats why i LarOVE IT!

I never thought about yellow before, I bet that would be cool. The BB does change colors. This pick was in real bright sun which makes it look very dark with rich tones.

[Kaotic Lazagna]

starting somewhere. drop it a bit.

[yariSB86]

whered you find those caps for the steelies?

[Imagine]

DOes that make u feel better?

-- Blen

Actually it does! When I get to drive by the gas station and laugh.:laugh: And when I do have to put gas in it, it is so much better then the Explorer was. :thumbup:

First thing first. TRD spring..
go to trdspark.

-- Blen

I'm actually holding out for Tein or Cusco coilovers. I will be ordering a TRD swaybar and an armrest from TRDSpark though.

Where in Ohio do you live, and what kind of bike?

I live around the Wilmington Area. I actually have a few bikes. My road bike is an '06 Fuji Newest 2.0. My mountain bike is a cheap Schwinn Sidewinder and my BMX is a Poverty G-Ride.

Tell me more about the bike rack hitch.

BTW, here is what the steelies look like with the center cap.

The bike rack is a Hidden Hitch bolt-on. It mounts to two bolts that hold the bumper on. It can be installed without removing the bumper and bumper cover though it's a tight fit for the hands to get to the upper bolts. If anyone is going to get one and wants more info on installing it let me know and I will write up a good how-to article. My camera batteries were dead when I was going the install or I would have done it then. I did the install by myself it wasn't to bad. An extra set of hands would have been nice. I paid $91 shipped for the hitch from www.autoanything.com they have free shipping and I found a 10$ off coupon code by searching google.

Where do you get the center caps? It definitely makes it look more finished.

It is special, it's BAYOU.

:laugh: I didn't care for the color when I first bought it. I really wanted a Mica or Blazing Blue, but the dealer only had White and Bayou. I like white, but its such a PITA to keep clean so I went with the Bayou. The color has grown on me. It looks really nice when it's clean and sunny. It needs some bronze or gold wheels though.:w00t:

[kurokoma-kun]

Remember you gotta start somewhere, and it's about the $$$$.

I think it looks great! Maybe b/c I just got finished doing the the same things to mine...:smile:

whered you find those caps for the steelies?

I believe Blacksan and I have the same ones, though I painted mine. its napa part #730-2411 (you have to order over the counter). Thing is they don't fit tight! Mine are stuck on with Goop, did not want to go epoxy route until sure I liked them.

[blacksan]

The center caps are NAPA /BALKAMP #730-2411 X2 per box. They are a bit oversize and do not fit the center of the hub as a normal grease cup does. I took a small, "8 Crescent wrench and made 4, smooth, concentric, inward bends on the skirt of the grease cup to make them tight over the wheel flange and tapped them on with rubber mallet. They are snug and have stayed on with out any fuss. You could add an epoxy if you felt it necessary.

My next step is adding polished beauty rings that are on there way as I type.

The other option is Toyota factory wheel centers.

[Imagine]

Ha! The wheel caps and rings look interesting.. Just a little bit to much shine for my taste.:laugh:

[uncleyaris]

The other option is Toyota factory wheel centers.[/QUOTE]

do you have a part number for those?

[blacksan]

The other option is Toyota factory wheel centers.

do you have a part number for those?

These do not secure on the lug, but by tension clips via the inner hub.

The black hubcap is #901.

The silver hubcap is #903.

[kurokoma-kun]

The other option is Toyota factory wheel centers.

do you have a part number for those?[/QUOTE]

Good luck finding them! They are for a Tercel, not sure what year. They are not in stock at two places I've seen them but ARE in stock here for $30 apiece--a bit too high for me. I'm checking the junkyards.
http://theshinywheel.com/Toyota.html

[blacksan]

do you have a part number for those?

Good luck finding them! They are for a Tercel, not sure what year. They are not in stock at two places I've seen them but ARE in stock here for $30 apiece--a bit too high for me. I'm checking the junkyards.
http://theshinywheel.com/Toyota.html

http://www.hubcaps.org/tercel.html

This outfit has as many as you want.

[kurokoma-kun]

http://www.hubcaps.org/tercel.html

This outfit has as many as you want.

Huh...I went there before and saw that under some items it says "Order" and others it says "More Info." If you click on More Info it takes you to a page that says to call them, AND send digital pic of wheel if you need four caps. This made me think they were not in stock, but if you have ordered from them then its my mistake.

[blacksan]

Huh...I went there before and saw that under some items it says "Order" and others it says "More Info." If you click on More Info it takes you to a page that says to call them, especially if you need four. This made me think they were not in stock, but if you have ordered from them then its my mistake.

When I checked they actually where giving a discount for larger orders? Who knows, I was probably talking to someone that never has seen the warehouse before?

[uncleyaris]

thanks, its a good option for guys like me with no $ for rims right now.

[blacksan]

thanks, its a good option for guys like me with no $ for rims right now.

Don't even ask! :biggrin:

[uncleyaris]

lol

[blacksan]

lol

I would be more then happy to buy you a good southern Bourbon, but my dice are top secret!!!!!!:biggrin:

[uncleyaris]

I love, makers mark, Jimbeam Black label, wild turkey 151. I could share some real Canadian whisky for you.

[uncleyaris]

seriously, have you talked to ROCKLAND, maybe he can get these cheaper?

[naossoan]

What did you use to remove the rear badges?

My dealership stuck their "Metro" above the "Toyota" badge. I don't mind the Toyota one but I want to remove the "Metro" one. It's fairly thick so I can probably just pull it off with my hands, but it's going to leave a bunch of sticky residue crap on the car.

How do you get that off?

[brickhardmeat]

What did you use to remove the rear badges?

My dealership stuck their "Metro" above the "Toyota" badge. I don't mind the Toyota one but I want to remove the "Metro" one. It's fairly thick so I can probably just pull it off with my hands, but it's going to leave a bunch of sticky residue crap on the car.

How do you get that off?


get your self some fishing line or dental floss and figure it out, you could try using the search box:thumbup:

[uncleyaris]

ouch, us vetrans are so tough!

[Imagine]

What did you use to remove the rear badges?

My dealership stuck their "Metro" above the "Toyota" badge. I don't mind the Toyota one but I want to remove the "Metro" one. It's fairly thick so I can probably just pull it off with my hands, but it's going to leave a bunch of sticky residue crap on the car.

How do you get that off?

Like BHM said.. just run fishing line down behind it. I actually warmed it up with a heat gun then did it. The toyota emblem came off without leaving any sticky stuff behind at all. The Yaris emblem left some, but it came right off with my finger nail.:thumbup: It definitely looks a lot better.

[uncleyaris]

man you gotta let the guys use the search man, saves unwanted threads/posts