Parting out my car. :(

[brushforhire]

Well I have decided to part out most everything on my car. At this point I am probably looking to keep the engine and some of the other performance parts, but it never hurts to shoot me an offer.

So mostly all the trim and other other odds and ends are up for grabs at this point. Just ask if you want something in particular. Someone want all the plaid interior?

57213

57214

57215

I will try and get pictures of everything as I go along tearing it apart, but here are some quick prices:

Coilovers shipped in the US - $550
They will come with the oem strut tops and mounts, so these are ready to bolt right in. They have less than 1000 miles on them. One rear strut has the paint rubbed down a little.

57392
57393
57394
57395

2zrfe engine with a/c compressor, alt, starter, wiring harness (auto), and ECU (auto)- $600 pickup, probably around $800 shipped freight.
RPM longtube header and midpipe (slip joint welding solid) and DC sports axleback form the xD - $850 shipped in the US
I WOULD DO $1500 SHIPPED FREIGHT, THE ENGINE AND EXHAUST.
1nzfe engine - $150 pickup, probably $250 shipped freight
Upper dash panel - $150 shipped US
Headliner with plaid wrap - $150 pickup, probably like $225 shipped freight (because of size)
57223
60/40 rear bench seat and all plastic trim for it - $250 pickup / $350 shipped UPS
Front seats - $100 each pickup / $150 shipped each
Painted parts around radio and a/c controls - $50 shipped
Black trim pieces on either side of painted parts - $20 shipped each
Upper glove box lids - $40 shipped US each
Lower glove box - $45 shipped US
Entire carpet, decent condition - $175 shipped
Both rear 8" custom fiberglass sub boxes (no subs) - $75 shipped in the us
$350 shipped with the subs. The subs run $200 each on crutchfield, where I bought them from.
57224
Center console - $60 shipped US
Front calipers from xD/Corolla, pads, and Yaris SE front rotors. Coated in G2 black 2 part caliper painted. Less than 1500 miles - $250 shipped in
the us.
MI red brakes SS lines, less than 1500 miles - $100 shipped us

Let me know if there are any other specifics you are looking for.

[91mustang]

Hey, I'm Interested in the coil overs and rear sway bar.

[brushforhire]

I would to the coilovers at $550 shipped in the US, and the rear sway bar at $150 shipped in the US. Both bought new and have only like 1000 miles on them.

Also EVERYTHING is up for grabs. Engine, RPM header, midpipe, DC sports muffler, etc.

Just let me know what you are looking for.

I also have an extra 1NZFE engine if anyone is interested in an extra to build for boost or something.

[CrankyOldMan]

I'm not sure on the timing of when I can buy, but I'm interested in the whole exhaust. Possibly the stainless lines, too. Are the front lines toast?

[brushforhire]

Front brakes, calipers, rotors, pads, lines, everything are all good. Really everything behind the front rails is good. Only the intake manifold got damaged, as far as I can tell so far. The engine and everything still starts.

[bail_w]

How much for driver seat belt?

[brushforhire]

$35 shipped in the US.

[91mustang]

You have pictures of the coil overs?

[brushforhire]

I will try and get some pics up, asap.

[fredovvti]

How much for the DC Header?

[brushforhire]

I don't have a DC Header. It is the RPM long tube header and midpipe for 2zrfe. I have the dc sports muffler for the Scion xD, but fits up the the exhaust. I don't think it would bolt to the yaris exhaust, though.

[bail_w]

$35 shipped in the US.

Can you show me a picture of it? To make sure that we are on the same page.

Thanks!

[fredovvti]

And you sell the antenna base?

[texascolt45]

i'd be interested in the stock engine.how many miles,etc.

[brushforhire]

Antenna base would be $70 shipped in the US

The stock 1NZFE engine has 132k miles on it. I owned it from 0 miles. Oil changes done religiously every 3-5k miles. I worked at a Toyota dealer, so they always did everything to it. Never had any issues, and ran like a champ.

[texascolt45]

heck try to sell it local,but i'm 77619 zip code.shipping is such a pain I know.

[brushforhire]

I will get pics up next week, when I get back from vacation. Gonna tear the car down more.

[justplainbob]

I'm looking for the map light assembly + the plug from the stock wiring harness for it. I deleted mine for a custom GPS set up and used the wiring for a cigarette lighter plug ;-)

[bobby0600]

Does the radio have the CD player?

[brushforhire]

Radio is already gone.

[91mustang]

Negotiable on the rear sway bar?

[brushforhire]

I'm open to offers on everything.

[baseballfan416]

trying to locate a passenger side caliper bracket with moveable sliding pins/intact boots. My zip is 53223.

[rningonfumes]

If you have remote locks, would you mind pulling out the associated parts?

[sr20-thoj]

Front reinforcement bar looks to be in decent shape. How much did u want for it? That's if it's not bent that is.

[ezhacker1]

whats the volume for the sub boxes. they look great.

[brushforhire]

Okay quick answers:

I do not have the original caliper parts, only the bigger XD brake parts.

Not sure what would be related to the remote lock that you need for your project.

Front reinforcement bar does look straight to me, also $60 shipped in the USA

I do believe the volume of the sub boxes were right around .5 cu foot each. And that you for the compliment. If you were interested in the subs and boxes, I could cut you a good deal. Edit: If anyone is interested I would do the sub boxes with the JL subs in them for $375 shipped. The subs alone were $400. They are the JL 8W3v3-4 subs. They sound amazing.

[rningonfumes]

Hi.

To elaborate, can you unlock your car using a clicker like one of these: https://images-na.ssl-images-amazon.com/images/I/41L0JRry2jL.jpg or https://images-na.ssl-images-amazon.com/images/I/21y%2B%2B6hHMTL.jpg

...that was from the factory or dealorship (not aftermarket).


I'm trying to enable this function from this thread: http://www.yarisworld.com/forums/showthread.php?t=1526&highlight=auto+locks I mainly need that box that is in the left C-pillar.



And if so . Would you be willing to let me buy the parts that will enable it for my car which has power locks but doesn't have the box that will let me use remote lock.


CTSCOTT if you're reading, do I need anything else? I read in that same thread I linked to that there was some talk about immobilizer?

[dogsridewith]

How much damage to the rear bumper and its cover?

[WeeYari]

How much damage to the rear bumper and its cover?

http://www.yarisworld.com/forums/attachment.php?attachmentid=57206&d=1464976959
.

[brushforhire]

Hi.

To elaborate, can you unlock your car using a clicker like one of these: https://images-na.ssl-images-amazon.com/images/I/41L0JRry2jL.jpg or https://images-na.ssl-images-amazon.com/images/I/21y%2B%2B6hHMTL.jpg

...that was from the factory or dealorship (not aftermarket).


I'm trying to enable this function from this thread: http://www.yarisworld.com/forums/showthread.php?t=1526&highlight=auto+locks I mainly need that box that is in the left C-pillar.



And if so . Would you be willing to let me buy the parts that will enable it for my car which has power locks but doesn't have the box that will let me use remote lock.


CTSCOTT if you're reading, do I need anything else? I read in that same thread I linked to that there was some talk about immobilizer?

Mine did have that remote/key in one combo. I actually have that little box up on ebay right now.

[dogsridewith]

Thanks for re-posting that photo W.Y. (and also for finding those good Ultragauge links yesterday!)
I'm seeing paint missing and a gap...some of which may be due to the quarter panel dent. But most of the bumper doesn't show...and I don't know if bfh is showing the best side or the worst.

[WeeYari]

That is the worst side. Search for his totaled my car thread for all the pictures he posted of it.

[dogsridewith]

! A perfect blue door on an Absolutely Red and I've got a Caribbean taxi cab..how's the rear hatch? (I'm in central PA, so don't need shipping.)
http://i118.photobucket.com/albums/o84/dogsridewith/547789ad.jpg

[brushforhire]

The bumper is gone, it had a huge hole in it. The hatch it actually looking really good, only a small tiny little bend on the left lower side. I barely even noticed it, I'm sure it can be bent back. Even if not it does not affect the functionality of it. You looking for a passenger door also? How about a plaid headliner? LoL.

Edit: Or how about the entire engine swap and exhaust?

[ern-diz]

! A perfect blue door on an Absolutely Red and I've got a Caribbean taxi cab..how's the rear hatch? (I'm in central PA, so don't need shipping.)
http://i118.photobucket.com/albums/o84/dogsridewith/547789ad.jpg

That is a classic Tercel. My cousin had one lowered, on Enkei 5 stars with a booming system back in the day lol.

[rningonfumes]

Do you have the link the the ebay sale for the box sir?

[brushforhire]

Do you have the link the the ebay sale for the box sir?

Linky (http://www.ebay.com/itm/07-Yaris-door-control-receiver-module-relay-89741-52240-/222199769227?ssPageName=STRK:MESE:IT)

If it's not cool to post links like this, I will gladly take it down.

[rningonfumes]

Gracias

[brushforhire]

bump for new pics, and updated pricing and the such.

[Creepin]

looking for the bin next to the drivers leg that covers the fuse panel. And if you would sell just the one of the blanks that go in the center console where people put the aftermarket fog switch id buy them both

[CrankyOldMan]

I WOULD DO $1500 SHIPPED FREIGHT, THE ENGINE AND EXHAUST.


Bump for an incredible deal! I bought a long block 2ZR and I've spent at least this much trying to source all the bits I need to make it work, not including the exhaust! That ate up my budget for the long tube header and mid pipe, so I'm making do with what I can scrounge up.

For reference, I bought a used Blitz S/C kit for that much and got a bit more power with a LOT less reliability. According to resident guru CTScott, the 2ZR is the best bang for your buck when looking at S/C, turbo or 2ZR swap. Please, someone buy this thing before I sell a kidney and buy it!

[brushforhire]

looking for the bin next to the drivers leg that covers the fuse panel. And if you would sell just the one of the blanks that go in the center console where people put the aftermarket fog switch id buy them both

The bin is already gone, but are you talking about the blanks near the aux port?

[dumbo0]

Is the front left axle shaft assembly good?

[David C]

Is the sway bar still up for sale ?

[oxide]

pm sent

[brushforhire]

Front axle is good

edit: Sway bar sold.

[David C]

I sent you a PM

[brushforhire]

57426

For reference for someone.

[94lsteg]

Do you have the rear cargo cover?

[brushforhire]

I do have the rear cargo cover. The on string is broke, and it somehow got a crack in it, but still worked perfectly for me.

[94lsteg]

Would you be able to post a picture of the cargo cover?

[oxide]

BUMP for a great member/seller.

[brushforhire]

QUOTE=94lsteg;786128]Would you be able to post a picture of the cargo cover?[/QUOTE]

Let me get it cleaned up and I will post a pic or two.

[GrayYaris]

Are you still parting out the Yaris or is it gone?

[brushforhire]

All I have left is the engine swap stuff. Engine, ecu, harness, xd exhaust manifold, ac compressor, alternator, etc.

[Elwe2k]

Subs are gone? I would like to have one :)

[brushforhire]

I have the subwoofers, but no boxes.

[Elwe2k]

How much for just one? Planning to add a sub only if I find a good deal. JLs are very good woofers though.

[brushforhire]

I would do one JL sub shipped in the US for $160.

[sickpuppy1]

How much for the rear bumper protector?

[brushforhire]

How much for the rear bumper protector?

Rear bumper is gone.

[Driftw00d]

How much are you looking to get for the alternator? Is it the OEM or aftermarket?


Edit: Nevermind. Ended up buying a re-manufactured Denso on Amazon.

[Pizzaboyracer]

Do you still have the stock motor

Sent from my SM-J327P using Tapatalk

[yarisito]

How about front struts and lower control arms?