Cranky's Clearance sale!

[CrankyOldMan]

**********************

Had some stuff go, some stuff stay. Still sorting out the garage as time is available, after single parenting stuff and house repairs are done. =)

**********************

I've got some leftover parts that need to find new homes. I will try and keep the top post updated with inventory as things are added and sold.

** All prices are without shipping **

Please contact me with your zip for a quote. International is possible, but you need to be prepared to pay any duties or import taxes on your end.

** Payment via PayPal is preferred **

I will also accept money orders or cashier's checks, but I will not cross ship (I have to get your payment before I ship).

Updated 20 Feb

3DR HB door panel trim and A-pillars (NON airbag). A pillars $15 ea. Door trim $25 ea (includes all three pieces and switches for one side).
http://i.imgur.com/sF8PbwR.jpg

HB upper deck cover. Cracked in the middle, still stays in place. SOLD
http://i.imgur.com/0KV455M.jpg

Gen 2 side mirrors and tail lights. Prefer to sell as pairs. $50 for mirrors or tails.
http://i.imgur.com/6jOj4dq.jpg

Eclipse AVN2210p head unit (TomTom GPS, BlueTooth phone, AUX, iPOD, MP3 CD) - $100
http://i.imgur.com/ahFBQCA.jpg

OEM Radio, Climate control bezel and side bezels. Radio $50, bezels $10 ea.
http://i.imgur.com/Brj7yiX.jpg

1NZ injectors and coil packs. $10 each.
http://i.imgur.com/TaSryKI.jpg

Wiper control stalk with delay - $25
http://i.imgur.com/YyKgWVm.jpg

Scion xD console panel with 4 blanks, iPod and AUX connectors - $25
http://i.imgur.com/CHbNj67.jpg

Misc parts.
Driver and passenger upper glove box lids - $10 PASSENGER SOLD
Center stop light - SOLD
1ZZ throttle body (52030-0D031) - $50
Yaris central switch cover with 2 blanks, door lock and AUX connectors - ?
Dash light dimmer switch - $5
TPMS modules (2 available) - $15 ea.
Oil control valve - $25
Cam position sensor - $25
MAF sensor - $25
http://i.imgur.com/S4JyAlV.jpg

Wiper nut caps - SOLD!

Integration Relay (82641-47020) 2 available - $50 ea.
http://i.imgur.com/2HBuVFg.jpg

Other notable items that will be coming up soon:
09 HB seats (driver, passenger, 60/40 rear bench). Driver's seat has tear on left bolster and worn patch on seat.
Misc wire harness bits
And probably more!

[soldout]

Is the wiper stalk for the rear wiper so it can have more than 1 speed? If so I'll take it payment via PayPal.

[CrankyOldMan]

Is the wiper stalk for the rear wiper so it can have more than 1 speed? If so I'll take it payment via PayPal.

No, it's for the front wipers. The base model didn't come with delay.

[invader166]

Is the wiper stalk for the rear wiper so it can have more than 1 speed? If so I'll take it payment via PayPal.

Even if you were to change your rear wiper stalk with a variable speed one, you still woun't have more than 1 speed setting. The wiring for that function is missing.
You'd need to build your own variable speed circuit.

Fortunatly, it's not too difficult to do. All the info you need is on this thread: http://www.yarisworld.com/forums/showthread.php?t=35638&highlight=Variable+rear+wiper

[3cyltrbo]

Interested in the a-pillars if your cars had roof airbags

[CrankyOldMan]

Interested in the a-pillars if your cars had roof airbags

No, these are without airbags.

[CrankyOldMan]

Bump for added items!

[CrankyOldMan]

Bump for more added items!

Don't like a price? Make me an offer! Want more than one thing? Make an offer!

[ern-diz]

Hey Cranky...are you selling just the power window trim pieces/switches, or are you also selling all the power window motors, etc.?

The 2007's weren't offered with power, so I have aftermarket power windows and door locks in mine. They've done the job, but not well. I'd be somewhat interested in converting to factory options if possible...

[kimona]

The 2007's weren't offered with power...

My 2007 had the optional power package (windows, mirrors, locks). I'm guessing your 2007 has some of the wiring present for a plug and play installation of OEM equipment.

[ern-diz]

My 2007 had the optional power package (windows, mirrors, locks). I'm guessing your 2007 has some of the wiring present for a plug and play installation of OEM equipment.

That's super interesting. Everything I'd heard, up to this point, was that the intro year didn't offer power windows/door locks. I was under the impression that those options weren't available until 2008.

I knew about some of the wiring being there anyway, which is where my interest in Cranky's parts comes in.

[CrankyOldMan]

Hey Cranky...are you selling just the power window trim pieces/switches, or are you also selling all the power window motors, etc.?

The 2007's weren't offered with power, so I have aftermarket power windows and door locks in mine. They've done the job, but not well. I'd be somewhat interested in converting to factory options if possible...

Regrettably, I only pulled the trim pieces. It may have been an 08, but it's definitely not a 09-10. I can get pictures of the switch connectors if that helps.

[ern-diz]

Regrettably, I only pulled the trim pieces. It may have been an 08, but it's definitely not a 09-10. I can get pictures of the switch connectors if that helps.

You know what, I think it would, thanks for offering.

If I can make your stock switches work with my wiring/motors, it would still be a little better than what I have now.

[CrankyOldMan]

Here's the connectors on the driver (left) and passenger (right) side. I've also got the OEM central locking switch for the console up in the Misc. picture if you need one.
http://i.imgur.com/WdI0z9h.jpg

[sickpuppy1]

Hey , do you still have those wiper nut caps?

[CrankyOldMan]

Hey , do you still have those wiper nut caps?

Sure do! PM with Zip code for shipping rate.

Thanks!

[mehullica]

how many miles on the MAF, coils, & injectors?

[CrankyOldMan]

how many miles on the MAF, coils, & injectors?

They came off a crashed vehicle in a salvage yard, so there was no way to know the mileage. I can do a basic inspection on them (not a flow test on the injectors) and let you know if they're within OEM spec. for resistance and continuity. I'm thinking about shipping the injectors all off to Witch Hunter Performance for flow matching, but that's $22/unit, so the cost would go up quite a bit.

[sickpuppy1]

Got my wiper nuts like fast! Thanks! Look and fit like new.

[ern-diz]

Hey Cranky - I'd like to take the two door trim pieces (that house the driver and passenger power window switches) off your hands. I'm not sure those OEM switches will work with my aftermarket power window kit, but I'm willing to take them to my local audio guy and see if he can make it work.

If I'm reading your post correctly, you want $25 for both pieces, right?

[CrankyOldMan]

Hey Cranky - I'd like to take the two door trim pieces (that house the driver and passenger power window switches) off your hands. I'm not sure those OEM switches will work with my aftermarket power window kit, but I'm willing to take them to my local audio guy and see if he can make it work.

If I'm reading your post correctly, you want $25 for both pieces, right?

I might be able to get the connectors for the switch assembles as a pigtail, maybe 6-12" of wire on them. I was asking $25/side for all three pieces. Do you just want the section with the switch from each side?

[ern-diz]

I might be able to get the connectors for the switch assembles as a pigtail, maybe 6-12" of wire on them. I was asking $25/side for all three pieces. Do you just want the section with the switch from each side?

Yes; I was hoping to get just the two, small pieces that house the switches. Are you willing to sell them alone? If so, what do you need for them?

[MatthewMenze]

I am interested in the throttle body. Is that all I would need to upgrade the throttle body on my 2012 3dr hb, or do I need additional hardware?

[thebark]

How much for the cargo cover?

HB upper deck cover. Cracked in the middle, still stays in place.
http://i.imgur.com/0KV455M.jpg

[CrankyOldMan]

Items updated with SOLD/PENDING status. No new items added. May add more as I organize the new garage to make room for metalworking machines!

[CrankyOldMan]

Updated, for great justice!

[ACKING_QC]

Ay! just wonndering if that 1ZZ throttlebody is working?... I mean.... on my 08 LE hatch (canadian spec) does it have the appropriate gasket and cooling lines to be a direct fit in my car ?

[mehullica]

How many miles on the fuel injectors & ignition coils?

[CrankyOldMan]

Ay! just wonndering if that 1ZZ throttlebody is working?... I mean.... on my 08 LE hatch (canadian spec) does it have the appropriate gasket and cooling lines to be a direct fit in my car ?
The bigger throttle body won't hold the gasket in place on the stock intake manifold. There's a thread around here somewhere that someone used epoxy and a dremmel to modify the opening so that it fit the 1ZZ gasket. When I used one on my supercharger build, I machined a custom adapter out of aluminum. The bolt pattern is the same but the coolant lines might be pointing in the wrong direction and need different hoses to make them fit.
How many miles on the fuel injectors & ignition coils?
No way of knowing, they were pulled from a self-serve yard that didn't have batteries. Hooray for digital odometers!

[ACKING_QC]

The bigger throttle body won't hold the gasket in place on the stock intake manifold. There's a thread around here somewhere that someone used epoxy and a dremmel to modify the opening so that it fit the 1ZZ gasket. When I used one on my supercharger build, I machined a custom adapter out of aluminum. The bolt pattern is the same but the coolant lines might be pointing in the wrong direction and need different hoses to make them fit.



well then.. in that case, do you have that adapter? and coolant lines ( so I could buy "the full kit" )lol

[CrankyOldMan]

well then.. in that case, do you have that adapter? and coolant lines ( so I could buy "the full kit" )lol

The adapter doesn't go to the stock manifold. I machined it out of aluminum to fit a silicone elbow that was connected to the supercharger intake. I also bypassed the coolant lines with an inline barbed connector instead of routing new ones, so there's no parts for that.

I don't see pictures on the thread anymore, but here's how TMontague modified his manifold (http://www.yarisworld.com/forums/showthread.php?t=55464) for the 1ZZ throttle body.

[ricardo-cr23]

Hey Cranky!

Do you still have the integration relay?