Help with wheels &tires

[Yaris874]

I am getting some free michelin premier a/s
195/55/16 i was wondering what can I fit
16x ??? I was looking on 16x8 +25 i got trd springs drop 1.2 rear 0.5 on front
But I don't want any rub what u guys recommend on rims have to be 16"


Sent from my SM-G935T using Tapatalk

[Bluevitz-rs]

+25 will probably rub.

[Yaris874]

What should I get have to be 16"

Sent from my SM-G935T using Tapatalk

[WeeYari]

For 195/55/16, a very practical wheel would be 16x7, with offset value of +42.

Sent from my Elite_5_5_Octa using Tapatalk

[thebarber]

what wee said

[Yaris874]

Thanks guys

Sent from my SM-G935T using Tapatalk

[kimona]

Agree with WeeYari.

If you're lowered on TRD's and don't want to adjust camber, then I would suggest 16x7, ET40-ET45 with 195mm rubber.

[Yaris874]

So what the I have to do to fit those 16x8 +25 I really love those wheelshttps://uploads.tapatalk-cdn.com/20170318/dfde6b7fa32b374af1f183ec9f7908e1.jpg

Sent from my SM-G935T using Tapatalk

[Rigaud]

I run 205/45R16 on 16 x 7 ET42. Lowered 1.5" all around.

[Yaris874]

45 😨😨😨 be way too low for me to many potholes around here

Sent from my SM-G935T using Tapatalk

[Yaris874]

Hey can I do this specs https://uploads.tapatalk-cdn.com/20170321/96d7d1a912ef1f7bd41c4d135259a68b.jpg

Sent from my SM-G935T using Tapatalk

[WeeYari]

^ Yes

[Yaris874]

Thank u wee

Sent from my SM-G935T using Tapatalk

[Motzking1]

While we're on the subject. I have been reading the tire and wheel guide. I'm a bit confused myself. It's a lot of info and a lot of variables. I have a 2013 Yaris L hatchback(3 door) I would like to run 17×7.5 42offset. With 215×40×17. With coil overs and about 1.2 to 1.4 drop. What are your thoughts? Am I going to be cutting stuff to stop the rubbing? Or is this likely a safe setup?

Sent from my SAMSUNG-SM-N900A using Tapatalk

[WeeYari]

I have run 215 series rubber on 17s and I can tell you from experience that you will not be happy with the performance of the vehicle. Sure, nothing will break it free in a corner, but it takes a lot of power to move that much rubber. If your 17x7.5 wheels are not uber light, then you will be toast.

[Motzking1]

Thank you for the input I really appreciate it. That makes common sense.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[Yaris874]

Hey wee u say +42 rite wat other offset I can use 16x7

Sent from my SM-G935T using Tapatalk

[Yaris874]

Wheels just came in https://uploads.tapatalk-cdn.com/20170323/0c6e459a0733adee823860f305bd1a34.jpg

Sent from my SM-G935T using Tapatalk

[Bluevitz-rs]

NICE!

[Yaris874]

https://uploads.tapatalk-cdn.com/20170323/b8c62ecca32530708aeaa0599928c98f.jpghttps://uploads.tapatalk-cdn.com/20170323/d66b2d91df00903e5a53258b13a9ff12.jpghttps://uploads.tapatalk-cdn.com/20170323/1bd48ac960fe53ff399e8d44a78eba79.jpghttps://uploads.tapatalk-cdn.com/20170323/681fb71604acf5754dba0f5ab5d7b8be.jpghttps://uploads.tapatalk-cdn.com/20170323/958ea395c62ab3ef8c24ed1bbca38b71.jpghttps://uploads.tapatalk-cdn.com/20170323/6a4c1ab6ba768280efbc877c02828544.jpg

Sent from my SM-G935T using Tapatalk

[WeeYari]

Yeah baby!!!

No more questions *whew*

[Yaris874]

Really wee lol sorry if I ask to much

Sent from my SM-G935T using Tapatalk