Log in

View Full Version : Front Body Damage Advice


zoidberg444
03-29-2017, 05:27 PM
Just wondering if I could tap the hive mind on this one. I'm fairly handy with most things and a bit of maintenance car wise but I've never really done much body work.

My 06 Yaris Hatchback had a rather nasty collision with a rock in the front passenger side while she was on a road trip in Europe :eek: (wet muddy downhill grass bank on a camp site).

58154
58152
58153

As you can see the radiator frame is damaged, the plastic splash shields and there is a split in the passenger side headlamp. I need a new bumper too.

Am I correct in assuming the front end of the car is all bolted together? No welding needed? Therefore I could get the front cut off a scrap vehicle, straighten it out and whack a donor front on bolt/clip it together, a bit of paint? Or am I off my rocker? Is this damage to severe? :bonk:

Amazingly the car has since done 10,000 miles (7000 of them in Europe) and there are no issues with steering or handling even at autobahn speeds. Not only am I kind of attached to this shitbox, my finances will be more suited to buying a newer vehicle in 3 or 4 years when the rust finally wrecks it so a repair for scrapyard prices, a weekend or two of my time and a few parts seems more appealing.

Jason@SportsCar
03-29-2017, 05:41 PM
So long as the front snout on the unibody is not bent (looks ok in your pics) it is a pretty simply nut and bolt job. Just grab the complete core support from a parts car and bolt it on yours.

thebarber
03-29-2017, 07:34 PM
Nut and bolt....i hit a piece of metal on the highway in my 07 and it was a quick-ish fix

zoidberg444
03-30-2017, 06:13 PM
Thanks for the advice chaps. I wasn't quite sure where the unibody ended and where the bolt on frame began and wanted to double check before i drove 70 miles to get a donor front.

Tough little car. I thought i was in the shit big time when it happened. I was 1000 miles from home. I'll be glad when i get it fixed.