Powering Yaris Digital Instrument cluster outside of car

[AndrewMohawk]

Hey guys,

I have a Yaris digital instrument cluster and I'm trying to power it outside of the car just with a 12v battery, but I don't want to blow the thing. I've been searching for days to try and find a wiring guide so I can figure out +12 and GND just to have it on, but I've had no luck!

It has a 24 pin connector and an 8 pin connector, they all have the original wires with the colours from Toyota, I just cant figure out which are needed.

Please can you help!

I've uploaded the images to https://imgur.com/a/ag5b3 and as they were over the default attachment size :)

Thanks so much!

[KCALB SIRAY]

Why on earth would you want to do this? Just check the connections with a meter if you are concerned its good or bad, that will tell you without the hassle of trying to power it up.

[AndrewMohawk]

I'm planning on playing with the CAN for this particular unit and I don't want to do anything inside a car, plus having the unit powered and working outside give me the ability to teach/show/demonstrate to other people

-AM