Ralley Style LED Lights on Yaris

[hotracer_05]

Whats up guys! Didn't see too many posts about hooking some of these up, so decided to throw one out there in case anyone wants to do the same. For my Third Gen Yaris I really wanted to go with the ralley look, so I decided to add some LED lights and a Bumper Bar.

For the Bumper Mounted LEDs I went with this Universal License Plate Bumper Mount which can be found all over Ebay

https://image.ibb.co/dFQGaF/7_F115431_1_DD5_4_B92_A6_CB_9_ACA0_D7_A6_F3_F_zpsu aeondmq.jpg

Instead of just using the actual license plate bolts to mount it, I used the 4 corner holes of the bar plate and drilled corresponding holes to the bumper. Then add bolts with washers to make it more secure.

For the Hood Mounted LEDs I went with these Universal Hood Mounts, also found all over Ebay

https://image.ibb.co/j8VzvF/0_AD238_FB_FB7_E_4053_9751_D5_BD1_E644_B68_zpsi6wf 9n8m.jpg

I just used the actual mounting C clamps, I removed the Risers

To control the Lights I went with the ACC Trigger Control Module. What I really like about this module is that the switches it comes with are wireless, so no need to run a harness through the firewall

https://image.ibb.co/mdrYNv/4701076_E_23_B7_4_BE4_A6_EC_F271_E6_AE0633_zps5krk 3ofd.jpg
https://image.ibb.co/kNjypa/84651289_1_B66_44_B4_B6_F8_98_ADB16_F379_D_zps5thz jtjn.jpg

For the bumper lights I ran the wires through the grill. For the Hood lights I ran the cables in the hood hinges themselves so they stay tucked away with the hood closed.

https://image.ibb.co/hdpnhv/8568_C0_C7_1_D39_41_FA_AD69_8_D14_C042_AB62_zpso7v dobvy.jpg
https://image.ibb.co/dNWB9a/66_E2_D9_D6_723_B_4_C70_ADA6_D49385_C62_D00_zpsrka ywqol.jpg

And Ta Da! Final Product. This look is definitely not for everyone, but I drive through a lot of nothing sometimes and the extra lights help

https://image.ibb.co/dw8KvF/D4847393_F4_F9_4622_B77_F_6_FEDFC2_B91_EB_zpsecusr lng.jpg
https://image.ibb.co/gfif2v/6_D054102_9_C49_43_F5_BA14_250_EB0_B0_D8_C6_zpsj5y tftdv.jpg

[ACKING_QC]

I'm not a fan of hood lights... but you should've took some big ass round lights if you wanted a more rally style.. now it looks like you just installed Jeep lights on a Yaris XD

[ccyaris]

Nice, lots of lumens, definitely won't tax your electrical system. Osram LEDFOG201 are available to fill out the factory location with optional Toyota mounting brackets.

[NYC-SE]

Please don't drive behind me.

[Dodge Aries K]

YES! This is awesome.

[David C]

Like ACKING said, round would have been even better looking, and I would have tons with a lower profile but wider spread hood lights (aero dynamics and less prone to get snag when cleaning). A rally style spoiler would look awesome on the car too.

All being said, I like your setup. The wireless switch box is neat and I think you'd done a great job thinking it all out. Thanks for sharing.

[heeroyuy01195]

Glad someone finally did it, been wanting to see a Yaris setup with lights like this for a good while.

[KCALB SIRAY]

At first I was going to side with some of the folks here and lean on the "meh, no" side. BUT, it serves your purpose and it's your style and that's what makes you happy, I can dig that. I like it more and more each time I look at it. It's different and unique, and will light up a mastodon if and when you come across one crossing over the 635 :thumbsup:.

[kimona]

That universal bumper mount bracket is great!

[Dabuu]

Hell yes.

[hotracer_05]

Thanks for the feedback guys! I was thinking of doing round HIDs (I have 2 9" ones that will turn night into day), But I got these for pretty cheap and they are pretty light. I really want to add a spoiler, but cant find any for this bodystyle!!! All the ones ive seen are for 2nd gens

[Alain93]

Cool!
Did you have to remove the bumper to install it?

[hotracer_05]

Cool!
Did you have to remove the bumper to install it?

I didn't, I removed the plastic skid plate and reached behind.

[Alain93]

I didn't, I removed the plastic skid plate and reached behind.

Thanks

[coolguyndc]

I am doing my own bumper bracket using a aluminium L piece. Looks good so far. Did it because of your car :)

[moyerhw23]

Looks great, man


Sent from my iPhone using Tapatalk

[hotracer_05]

I am doing my own bumper bracket using a aluminium L piece. Looks good so far. Did it because of your car :)



That's awesome! Post pics when it's done


Sent from my iPhone using Tapatalk

[hotracer_05]

Looks great, man


Sent from my iPhone using Tapatalk



Thanks!


Sent from my iPhone using Tapatalk