Dogbone poly bushing

[tmontague]

I remember someone posting on here in the past about finding poly engine mount for a VW that fits in the yaris Dogbone mount.

I cannot find the thread any more. If anyone has some info regarding this or the link to the thread please post it up. Essentially you press out the oem rubber and insert the poly one that is meant for a VW

[DarkShadowFox]

I remember someone posting on here in the past about finding poly engine mount for a VW that fits in the yaris Dogbone mount.

I cannot find the thread any more. If anyone has some info regarding this or the link to the thread please post it up. Essentially you press out the oem rubber and insert the poly one that is meant for a VW

https://www.google.com/search?safe=strict&rlz=1C1GGRV_enUS752US752&tbm=shop&q=VW+dogbone+mount+bushing&spell=1&sa=X&ved=0ahUKEwj27r2u3__VAhVp5IMKHYCcBR0QBQioAigA&biw=1280&bih=928#spd=0

[tmontague]

It was a specific one, not sure if it was used as a larger motor mount or as a vw doggone. The thread had the part number and everything but I can't pull it up on searches.

The link you postedisted is just a general search so still leaves me with more Q's than A's unfortunately

[DarkShadowFox]

It was a specific one, not sure if it was used as a larger motor mount or as a vw doggone. The thread had the part number and everything but I can't pull it up on searches.

The link you postedisted is just a general search so still leaves me with more Q's than A's unfortunately

http://powerflexusa.com/volkswagengolfmodelsfrontenginemountdogbonesmallBu shing-pff85-505-1-1.aspx?gclid=Cj0KCQjw557NBRC9ARIsAHJvVVPVatRuAetbc ytf56uW76z7nHUku5ozu7mk5FZNKNjv427ZUIv-dMkaAmsOEALw_wcB

? This

[tmontague]

No, it was red poly. It was also much bigger in size as It has to replace the big rubber bushing in the yaris doggone. It does however have the metal sleeve in it

[DarkShadowFox]

No, it was red poly. It was also much bigger in size as It has to replace the big rubber bushing in the yaris doggone. It does however have the metal sleeve in it

https://www.ecstuning.com/b-ecs-parts/ultimate-dogbone-mount-bushing-red/15.1105r~round/


?????

edit:

why dont you just spend more money and order the VITZ TRD engine mounts from japan?

[tmontague]

That link looks closer to it but still looks too narrow.

Do you have the link for the trd mount, I can never find it anywhere online and I want a stiffer mount whereas the trd is a hardened rubber iirc

[DarkShadowFox]

That link looks closer to it but still looks too narrow.

Do you have the link for the trd mount, I can never find it anywhere online and I want a stiffer mount whereas the trd is a hardened rubber iirc

this is mk3 I dunno if mk2 fits

http://trdparts.jp/vitz/parts.html

http://www.trdparts.jp/parts_index.html

[tmontague]

Here (http://www.yarisworld.com/forums/showthread.php?t=55109)
is the a link I saw before but it isn't the one I'm thinking about iirc

[deng]

You weren't confusing the engine mounts with these bump stops were you? I see that you posted in the thread:

http://www.yarisworld.com/forums/showthread.php?t=58523

Beatrush/Laile makes a nice dogbone mount.

https://www.rhdjapan.com/laile-engine-roll-stopper-bushing-ncp91.html

[Dodge Aries K]

Yessssss... that Laile thing... I'll be ordering that asap.

[tmontague]

Thanks a ton. I must have gotten then threads mixed up but realistically I'll just order the beatrish mount, seems less work in the end

[Dodge Aries K]

Ordered that mount. Heck yes. That should fix the most annoying thing about my 2016... I hate how the engine rocks back and forth when you try to shift faster than you would a school bus.

[DarkShadowFox]

im just looking to only use TRD stuff or toyota oem things cause im going for a purist thi g

Sent from my LG-H918 using Tapatalk

[deng]

No worries guys, glad I could help, I'm planning to order one myself. They're going to be baffled with all the submitted orders for the Yaris lol.

[DarkShadowFox]

No worries guys, glad I could help, I'm planning to order one myself. They're going to be baffled with all the submitted orders for the Yaris lol.
i wish parts werent so expensive the markup is insane.

Sent from my LG-H918 using Tapatalk

[deng]

The choice to being different is an expensive one.

[DarkShadowFox]

The choice to being different is an expensive one.

yeah but its worth it because then I know ive gotten the most I can out of my invesment, knowing that ill probably have the only legit as forigen spec as possible Yaris will just make me happy.

Im trying to make people go WOW, thats something what is it.

[SirDigby]

Here (http://www.yarisworld.com/forums/showthread.php?t=55109)
is the a link I saw before but it isn't the one I'm thinking about iirc

it says there is cure time involved. i think they are using the Energy Suspension fill-a-mount kit, maybe?

i was going to just make my own too...

[SirDigby]

Here (http://www.yarisworld.com/forums/showthread.php?t=55109)
is the a link I saw before but it isn't the one I'm thinking about iirc

it says there is cure time involved. i think they are using the Energy Suspension fill-a-mount kit, maybe?

i was going to just make my own too...

[MedMantle]

This is also something I want, I hate that whu-whu-whu feeling when I shift hard!

[Dodge Aries K]

Well, while expensive, that beatrush mount thing was worth every damn penny. It definitely increases NVH which I don't care about but it makes it much much nicer to shift. Now, it still will "shake" or whatever if you don't give the engine some time to spin down between shifts but it's nowhere near as bad as it was. I think with a lightweight crank pulley (can't afford nor want to pull the trans off to replace the flywheel on a 1800 mile car) then it will be pretty much perfect.

[tmontague]

The lightweight flywheel makes a big difference with both having to wait for the engine to slow down between shifts. I can only speak for that in the 2zr but I'd imagine it similar in the 1nz.

I'll be purchasing the beatrish mount soon as well, I'd rather have a proper mount in there. My poly filled ones have cracked due to the torque on them and not waiting long enough for them to cure