PDA

View Full Version : 2008 Yaris No airbag light at all


rudycoop
09-11-2017, 01:24 PM
I bought this Yaris for my girlfriend to commute back and fourth to school. We recently had the airbags replaced on the recall and they noted that the light didn't come on at all when you start the car. I replaced the Airbag ECU and still no light when I turn the car on.

I jumped the pins to get a code and the check engine light blinks NOT the airbag light. I do believe the car has been in an accident with the previous owner.

Thoughts? I am at a loss with this one. The car has the recall replaced airbags and a known good airbag controller installed, but I still get nothing. no light at all ever. The passenger airbag light functions properly however.

What do I do next? Any help would be greatly appreciated.

*NOTE* I considered that the PO maybe was some slimy sort of tech and disabled the bulb all together? I pulled the cluster apart and everything looks normal in there. The bulb is built into the board and doesn't look messed with.

WeeYari
09-11-2017, 01:26 PM
Bulb? *shrug*

Sent from my Elite_5_5_Octa using Tapatalk

miiser
09-12-2017, 03:50 PM
Bulb? *shrug*

Sent from my Elite_5_5_Octa using Tapatalk



He probably means the red icon that pops up on the dash when you put the ignition to ON. together all the warnings lights pop up to let you know that all notifications work properly. (Photo for reference)
https://uploads.tapatalk-cdn.com/20170912/ed98135263810a5b7c7d5c0b46b494a8.jpeg


Sent from my iPhone using Tapatalk

WeeYari
09-12-2017, 04:05 PM
I know what he means.

Sent from my Elite_5_5_Octa using Tapatalk

ncp13
09-13-2017, 04:25 AM
Try borrowing a cluster and see what happens...

It should do a self check on all signals and go off..

draftpunk
09-15-2017, 01:52 AM
The fuse?

Sent from my SM-G920I using Tapatalk

rudycoop
09-15-2017, 10:22 PM
The fuse?

Sent from my SM-G920I using Tapatalk


Where is the fuse located? I looked though and didn't see anything airbag related.