2007 Yaris HB driver side tail light connector wiring order. Please help

[Innovative 1]

I had jdm RS tail lights on my Yaris (which are for sale shortly) and I'm going back to stock with car. Putting my old original stock tails back on. I got the passenger side wired up right because on the diy I followed it and I has pictures of the passenger connector. Its been a while since I put those rs tails on and I didn't plan on changing back so my dumb ass didn't snap a pic of connector the way it was. If anyone could either take a pic of connector on the driver side in stock order on stock tails it would be most appreciated. If anyone does and can't take a pic could you just tell me color of each wire from left to right?

[Innovative 1]

No one wants to help?

[yarisugi]

Just for you, sir.

[dogsridewith]

What "claw" needs pressed in what direction w/ what tool to open this dang connector w/o yanking on wires?!

Note: Idiotic routing of the pigtail to the upper bulb (parking-brake dual filament large-banjo bulb) shown in miniature circle drawings in owners manual, and described in factory shop manual for 2007 Yaris 2-door Hatchback North-America... Mind of Toyota--Module Madness.

(Edit: above comments from passenger side bulb-replacement adventure. The connector looks like one in the two photos of the above post .)

[yarisugi]

Hey dogsridewith. Here is the link with pics (http://www.yarisworld.com/forums/showthread.php?t=7224) from rage2 that should answer your question. Also on post #67 (http://www.yarisworld.com/forums/showpost.php?p=271956&postcount=67) of that link is how I removed the pins without yanking the wires.