PDA

View Full Version : Tire/rim size question


tmontague
10-04-2017, 01:29 PM
Wondering if anyone is running 15x8 +25 rims on their Yaris?

If so any rub and what camber?

I'm trying to figure out if I can fit some konig dial in's on my car. Currently I have 15x7 +35 dial it's with a 1010km spacer in the rear with -2.5 f and -1.8r camber. I have plenty of room up front and a bit in the rear. Problem is the 8" only come in +25 offset.

I'm thinking this is a bit of a stretch so I may opt for the Hypergram instead as they are 7.5 wide and +35.

Just wondering what peoples experience is with those sizes.

Steve35
10-04-2017, 01:53 PM
I tried these just for fun, they're off my Miata autocross car

https://www.tirerack.com/wheels/results.jsp?&autoMake=Mazda&autoModel=Miata&autoYear=1999&autoModClar=

no rub at all on at stock height, but the front stuck out too far

tmontague
10-04-2017, 03:36 PM
What are the rim and tire dimensions?

Steve35
10-04-2017, 04:14 PM
What are the rim and tire dimensions?

Wheels are what you asked for 15x8 25mm, tires are 205/50x15 BFG Rival 1.5's

Steve

tmontague
10-04-2017, 04:57 PM
Do you have a side shot showing tire poke? Also I'm assuming you're running stock camber?

Steve35
10-04-2017, 06:05 PM
Camber is stock, sorry no pics of the side shot and I've taken the tires off the wheels. You could see at least 1" of tread at the top of the tire.

tmontague
10-04-2017, 06:35 PM
Thanks for the info!

I've been searching around the forum and found a few threads that discussed this ad nauseam and it seems like the best option for me in 15x7.5 +35 with a 195 wide sport comp 2 tire (they fit very large for their size)

Steve35
10-04-2017, 06:42 PM
That is the wheel/tire combo I'm going with too. I use Tirerack.com all the time to verify fitments.

Steve