Log in

View Full Version : Part Identification Please?


white89gt
10-06-2017, 09:34 PM
I got into the inner fender on the drivers side of my 07 Hatch and found a part I don't know what it is. It's a resistor of some sort, and the white ceramic is all busted up. Can someone tell me what it is for? Thanks!

Crap.. was going to post a pic, but I will have to wait until I get to a PC.

white89gt
10-06-2017, 10:05 PM
Here it is.... seems kind of strange to put it in the inner fender.

https://cimg3.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/80-20171006_162600_6b6345adf42a38f44f1331b80af433c591 4ffa88.jpg

https://vgy.me/Bs4NIZ.jpg

SirDigby
10-06-2017, 11:56 PM
that's a weirdo thing. i wonder what that is?

Bluevitz-rs
10-07-2017, 12:08 AM
it's the resistor for the controlling the 2 speeds on the cooling fan. You need this if you have A/C.

zoidberg444
10-07-2017, 02:15 AM
Its your cooling fan resistor. I ended up with a spare one from a front end i salvaged off another Yaris. I've seen them on eBay for less than £15.

BLH
10-07-2017, 01:38 PM
As mentioned.
It is a large wattage resistor in the fan wiring.
Connected in series with the fan motor for the lower speed.
A relay should short across it when the fan is needed at full speed.

white89gt
10-08-2017, 11:49 AM
So yesterday I went to the wrecking yard. Couldn't find one of these unicorns.... I mean ballast resistors. So I went over to NAPA and asked if I could go through the book and find a 1.3 ohm ballast resistor. Found that Mopar used a double ballast on some of their vehicles with a 1.28 ohms on one side, and 5.X on the other (NAPA Echlin ICR 24 is the part). So, I bought one of them for 8 dollars and put it in. I measured it with a meter in the store, and measured 1.3 ohms on it anyway.... so I'm happy, lol. Thanks for the help my friends....

BTW, the dealer wanted 138 dollars for this thing. If you go this route, just be sure to measure and use the correct side.

https://cimg6.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/80-20171007_140147_d60b8f53c0444be69852a32cad649d14c1 f11f8a.jpg

https://cimg9.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/80-20171007_140757_804a4a71c69708e487c3db8968c022a8cb bb87f2.jpg

https://cimg8.ibsrv.net/gimg/www.f150forum.com-vbulletin/2000x1504/80-20171007_142355_5aed0d3b6be0cf1385b9a922cad8ceb106 a79011.jpg

SirDigby
10-08-2017, 01:08 PM
neat!