View Full Version : How many bottles of engine oil do you add?
hans_fh
05-23-2007, 07:41 PM
I just got 4 bottles of Mobil 1 engine oill. I am just wondering if the 4 are enough for Yaris? Thanks!
Astroman
05-23-2007, 07:41 PM
How big are the bottles?? Quarts, pints, or gallons. You will need 4 quarts of oil, which is one gallon.
blacksan
05-23-2007, 07:53 PM
3.9 Qt's with filter. Which normally works out too 2.5 bottles of Red Stripe for the grease monkey/me turning the wrench.:thumbsup:
hans_fh
05-23-2007, 07:54 PM
How big are the bottles?? Quarts, pints, or gallons. You will need 4 quarts of oil, which is one gallon.
945 ml per bottle
blacksan
05-23-2007, 07:58 PM
945 ml per bottle
This is just a guess, but you are not originally from Utah? :biggrin:
hans_fh
05-23-2007, 08:45 PM
I am originally from Germany. Sorry about my poor English.:)
Typer73
05-23-2007, 08:49 PM
Your English is fine, it's your mind-boggling use of milliliters that clued us in.
blacksan
05-23-2007, 08:49 PM
I am originally from Germany. Sorry about my poor English.:)
deutschland uber ulus :thumbsup:
hans_fh
05-23-2007, 10:19 PM
haha, anyway, are 4 Liters oil enough for Yaris? The oil bar is not always clear.
hans_fh
05-23-2007, 10:19 PM
Anyone uses Mobil 1?
blacksan
05-23-2007, 10:27 PM
Anyone uses Mobil 1?
Mobil1 is very popular. I use Amsoil myself which is a premium synthetic lubricant in both the engine and transmission.
hans_fh
05-23-2007, 10:34 PM
blacksan, Thanks! I changed the engine oil myself today and I guess I probably overfilled the oil. Not so sure because the oil bar is not as clear as my Jetta. I do follow the instructions: running the engine for 2 minutes and then turn it off. 2 minutes later, pull out the bar to clean it and pull it back. Then get the bar out again and check the bar.
There is oil everywhere on the bar... just filled nearly 4000 ml oil. It that too much?
Black Yaris
05-23-2007, 10:39 PM
DEUTSCHLAND!!!!
Black Yaris
05-23-2007, 10:40 PM
oh yeah and I am running mobile one 0w-20... 3.75 quarts per oil change with the filter
blacksan
05-23-2007, 10:47 PM
blacksan, Thanks! I changed the engine oil myself today and I guess I probably overfilled the oil. Not so sure because the oil bar is not as clear as my Jetta. I do follow the instructions: running the engine for 2 minutes and then turn it off. 2 minutes later, pull out the bar to clean it and pull it back. Then get the bar out again and check the bar.
There is oil everywhere on the bar... just filled nearly 4000 ml oil. It that too much?
If you want to get real specific the yaris takes 3689.7 ml:wink:
Are you here in school, or work?
Black Yaris
05-23-2007, 10:53 PM
If you want to get real specific the yaris takes 3689.7 ml:wink:
Are you here in school, or work?
actaully the 4000ml is correct, remember this is a Japanese car adaped to the American market, everything was originally done in metric
hans_fh
05-24-2007, 12:11 AM
If you want to get real specific the yaris takes 3689.7 ml:wink:
Are you here in school, or work?
I am actually helping two Chinese friends build schools for homeless children throughout the US. They are really nice guys. We are negotiating with Utah State Uni for the places and the resources. Three of us got three Yaris! Haha.
blacksan
05-24-2007, 12:21 AM
That is fantastic! If you ever make it to the East Coast and more specifically Virginia it would be my pleasure to have you visit. My home could be your Gästezimmer for a few days.
hans_fh
05-24-2007, 01:55 AM
Thanks Blacksan! I would let you know if I go to East Coast:)
Pavel Olavich
05-24-2007, 03:31 AM
I generally fill up the crank case just before the oils starts to run out the the valve cover....one can never have too much oil in their motor...why stop at 4 quarts? Just fill her up and rest assured your engine is well protected...I think the last time I changed the oil it took 9 or 10 quarts...
nsmitchell
05-24-2007, 09:53 AM
^^^ :laughabove:
Here is what I do and it works quite well.
Buy 4 quarts of oil.
Pour in 3.5 quarts. I use 1 of the first 3 bottles to measure out a half a quart, and keep the other half.
Drive it. Let it sit on a level surface and check it again. My oil level is always perfect to the top of the dipstick fill line. If it needs any more, add it in small increments.
Works perfectly every time.
Astroman
05-24-2007, 11:31 AM
I generally fill up the crank case just before the oils starts to run out the the valve cover....one can never have too much oil in their motor...why stop at 4 quarts? Just fill her up and rest assured your engine is well protected...I think the last time I changed the oil it took 9 or 10 quarts...
You better be joking :barf:
Katana
05-26-2007, 09:43 AM
None!
foober
05-27-2007, 09:59 PM
My first oil change I did myself I put in 3.7 quarts of 0-30 amsoil. And it registered over the top bar on the fill bar on the oil stick. So I emptied some. I now just put in 3.5 quarts and it winds up being just about right with the fill bar on the oil stick. Thats with changing the oil filter as well.
vBulletin® v3.8.11, Copyright ©2000-2026, vBulletin Solutions Inc.