PDA

View Full Version : Ichaba 10 mm wheel spacer question/s

Pinchlite
11-25-2017, 10:08 PM
I just received these(specifically for yaris)

I read this thread and there seems to be a issues regarding stud length and if washers are needed.

Not ichaba but penguin thread..

http://www.yarisworld.com/forums/showthread.php?t=18092


The studs that came with package are 57-58mm in length.

Getting the drum off is easy peasy but I want to know am I good to go with these length studs and if I should get washers?

PIC of one set of rear spacers...

https://i.imgur.com/JUIIITR.jpg

Basically I dont want to get everything disassembled to find out something is not quite proper/missing.
yarisugi
11-26-2017, 12:29 AM
If the length of the threads of the new stud is 10mm longer than the original one then you're good.
The new stud length should at least make up for the thickness of the spacer.
Dont confuse hub spacers with wheel spacers.
Pinchlite
11-26-2017, 12:38 PM
If the length of the threads of the new stud is 10mm longer than the original one then you're good.
The new stud length should at least make up for the thickness of the spacer.
Dont confuse hub spacers with wheel spacers.

The original is 39.87 mm under head length.The new ones are 50(Approx)underhead.

Should be good to go.