View Full Version : 2012 Se Hatch no cargo lamp after LED install
chaditotx
12-14-2017, 09:01 PM
Installed an LED in the cargo area, because stock bulb was so dim. I did it with the hatch open, and power to the circuit. The LED came on , but went off as I was installing it. I put the factory bulb back in, and it will not light up. Anyone have any similar issues? The fuse for the interior lights is good, as my dome lights work just fine. I searched quite a bit and only came up with similar issues in a Prius. https://priuschat.com/threads/no-fuse-for-the-cargo-light.118844/
NYC-SE
12-14-2017, 09:43 PM
Put a meter on it. Are you showing voltage?
dogsridewith
12-15-2017, 12:23 AM
No problems 16 months now w/ bright white 1 watt Sylvania Zevo #6418. (Looked for this over concern that the stock 4 watt bulb would drain battery during long hatch-up intervals when parked...to dry out after the Yaris leak thing, or wet dogs, etc.)
(Cargo area lamp Toyota Yaris)
re: Prius thread-- Wow. (and note that my 2007 cargo light does not go off after 20 minutes on either bulb type)
chaditotx
01-21-2018, 08:14 PM
Slight voltage is present at connector. There seems to be no fuse for the hatch light, it is switched on by the computer. Looks like I will have to jumper it from my dome lamp.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.