Leftover Parts Sale

[invader166]

Good day all,

I've now traded in my Yaris for a new Mazda 3 and I now have some extra bits and pieces that I no longer have any use for.

Note: Prices do not include shipping and are negociable. All prices in CDN.

Generic Short Ram Intake - painted red with blue cone filter - $20 (*price drop*) - SOLD!

http://i65.tinypic.com/ngej4m.jpg

Feel free to contact me with any questions about the items, I will be sure to answer as best as I can.

Cheers!

[yarisugi]

Can't see the images.
You might want to use another image host as Photobucket is no longer free.
Maybe imgur or tinypic would work.

[invader166]

Thanks for the heads-up. Will update!

[ACKING_QC]

Corolla 1ZZ Engine Throttle Body - 60 mm - modified and ready to use in a Yaris - includes extra hardware to extend coolant lines - $60

where u at ? I want it ! I'm in Canada PLEASE TELL ME YOU CAN SHIP !

+SRI

[WeeYari]

where u at ?

If you'd care to glance at his details, you'd see British Columbia.

[ACKING_QC]

If you'd care to glance at his details, you'd see British Columbia.

Details ? what details ????

EDIT: WAIT WHAT ? in all the years of being there you just made me realise the small details/locations about the MEMEbers of YW... well I've learned a thing today!

ay at least it's stil Canada... I'm in Quebec... shipping might not be "that" bad

[invader166]

Corolla 1ZZ Engine Throttle Body - 60 mm - modified and ready to use in a Yaris - includes extra hardware to extend coolant lines - $60

where u at ? I want it ! I'm in Canada PLEASE TELL ME YOU CAN SHIP !

+SRI

Yes I'm in British Columbia and can ship.

Checking online, it would cost about $40 to ship to Quebec since no customes are involved. :thumbsup:

Interested in both TB and SRI?

[ACKING_QC]

Yes I'm in British Columbia and can ship.

Checking online, it would cost about $40 to ship to Quebec since no customes are involved. :thumbsup:

Interested in both TB and SRI?

yes both! I have a SRI already but if my parts doesnt fit, yours will :)

[malibuguy]

Ah man I want those Staggs...but ship will be a whore

They stopped making them for the Yaris. I had really good results with them on my past tercel

[fredovvti]

U still have the 1zz throtle? I have money on hand. I pay the shipping! Please let me know.

Sent from my SM-N950F using Tapatalk

[thebarber]

Prices in canadian funds?

[invader166]

Ah man I want those Staggs...but ship will be a whore

They stopped making them for the Yaris. I had really good results with them on my past tercel

I know what you mean! Shipping those baddies out so far would be a total buzzkill!

Shame, they are great set of shocks!

@fredovvti Sale of the throttle body is pending, but you're next on the list if the deal falls through

@thebarber Yes, as per the OP, all prices are in Canadian Dollars

[invader166]

Wheel and hub spacers now for sale!

[06YarisRS]

Wheel and hub spacers now for sale!

Hi invader166. PM sent. Thanks.

[WeeYari]

H&R 10mm Front Wheel Spacers

FYI to anyone looking, those are not limited to use on front wheels.


Sent from my Elite_5_5_Octa using Tapatalk

[06YarisRS]

FYI to anyone looking, those are not limited to use on front wheels.


Sent from my Elite_5_5_Octa using Tapatalk

Oh, that is interesting, WeeYari. My 06 RS is stock with the 15" alloys with 185/60R15 tires. Are there any mods I'd have to do with either the Penguin spacers or the 10mm spacers for the rear? And, would just doing the back be ok and not adversely affect handling? What would be your recommendation(s)?

Also, I just went out and looked at my 06 in the garage and it almost looks as though 10mm spacers on the front would cause rubbing on the fenders. I just eyeballed it but the front wheels are not sunken anything like the rears.

Thanks!

Adam

[WeeYari]

Just doing the rear does not adversely effect handling. Just doing the back, like mine was in that one pic in another thread, brings the rear track out to be more in line with the front. More aesthetically pleasing. With the 13mm PG spacers, camber shims would likely be required to prevent wheel arch rub depending upon end game wheel tire setup.

Also, in case you are not aware of it, the rear axle sits approx 3mm off center. Rub will be introduced on one side before the other when playing with spacers, wheels, tires, and springs.

Sent from my Elite_5_5_Octa using Tapatalk

[06YarisRS]

Just doing the rear does not adversely effect handling. Just doing the back, like mine was in that one pic in another thread, brings the rear track out to be more in line with the front. More aesthetically pleasing. With the 13mm PG spacers, camber shims would likely be required to prevent wheel arch rub depending upon end game wheel tire setup.

Also, in case you are not aware of it, the rear axle sits approx 3mm off center. Rub will be introduced on one side before the other when playing with spacers, wheels, tires, and springs.

Sent from my Elite_5_5_Octa using Tapatalk

Again, very interesting. Thanks for the info. I'm going to have to do some measurements for sure. It may work out that the 10 mm spacers are a better option than the Penguin spacers. I would much prefer to not get into such things as camber shims if I can avoid it.

[06YarisRS]

Looks as though either the Penguins or the 10 mm will work with my current wheels/tires. Using a piece cut from my son's hockey stick and a tape measure, I determined that there is adequate room. And, WeeYari, how correct you are. There is definitely a difference from one side to the other, and at least 3 mm. Funny.

Once my parts arrive, I'll post up my progress. Seriously leaning towards the Penguins on the '06 and the 10 mm on the '08 (both rear applications)

[invader166]

Happy it'll all work out for you!

Spacers have been shipped and are on their way! :smile:

[06YarisRS]

Happy it'll all work out for you!

Spacers have been shipped and are on their way! :smile:

:thumbsup: Thank you, invader166. Looking forward to the installation and first driving impressions.

[WeeYari]

And, WeeYari, how correct you are.

:thumbsup:

That's what I'm here for. :wink:

[invader166]

Found a couple of more items that may be usefull if trying to improve the Yaris air intake system. :wink:

[invader166]

Prices dropped on all items. Probably the cheapest SRI you can get at this point.:laugh:

[Jeanseb29]

I'm planning on doing the TB swap in a couple of weeks. Is the TB spacer still available? If yes, what size is the center hole? 46 or 60 mm? How much for the intake manifold flange?
What other items have you found for improving the air intake? :) - JS

[invader166]

Intake manifold flange sale is pending, but the spacer is still available.

Spacer centre hole diameter is 54 mm.

[invader166]

Only intake left to sell. Nobody wants it?

Just a small reminder, price is negociable!! Feel free to make me an offer! There's a very good chance it'll be accepted.:wink:

[invader166]

All items have now been sold.

Once again a big thank you to all those who have purchased them.

This will be my last post here on Yarisworld. We've shared some great experiences over the years, but it's time now to move on to other projects.

Goodbye for now. May our paths cross again.