Yaris 2011 Headlights

[MISIEK]

Couldn't find anything while doing a search. I'm looking for two items. My Girlfriend recently purchased a 2011 Toyota Yaris 3-Door NCP130R 1.3L Petrol Hatchback Engine: 2NZ-FE. VIN JTDJW923905175610.

I would like to know where I can purchase some funky aftermarket, good looking headlights with Projector Xenon/HID. Such as below?

https://www.youtube.com/watch?v=h1gQ_DkYizA
https://www.youtube.com/watch?v=BUW8JrDAnEg
https://www.youtube.com/watch?v=oT1LQ0cKhsU

GF's current headlights
https://imgur.com/a/3wjeMCa

I Would also like to know of any recommendations of changing the stock radio to a touch screen unit with GPS & Wifi and any solution that could possibly have dash cam and reverse camera integrated.

GF's dash photo:
https://imgur.com/a/2fpDc11


Any help would be helpful!

[yarisugi]

You will have to retrofit them yourself or have someone do it for you. Buy good hid projectors, open up the headlights, install projectors, align the beams, close up the headlight, etc. It involves a lot of work but there are shops in your country that provide that service if you are not the diy type. Search -yaris projector retrofit- on the internet and maybe itll give you an idea of what is involved.

[kevinj93]

The Toyota radio is wider than a normal "2 DIN" radio. You can find side panel adaptors that fill the gap on eBay. This will allow fitting a standard 2DIN radio.

Alternately, there are radios available on eBay or similar sites that directly fit into Toyotas, and most have an input for a reversing camera. These have the advantage of plugging in directly, but are generally made in China, and the radio reception is not as good as the original.

I would be wary of fitting HID headlights. Australian Design Rules specifically prohibit retrofitting HID lights unless they were available as a factory option.

[Per Olof]

Try Kirinavi,I have buy 8 inch android 7,2 Nougat ,shows cameras with wifi front and back
GPS etc.works very good
(GPS you have to load program, but iGO Primo works fine in the intern memory,easy to install