TEIN Basic coilovers

[C2AUTOSPL]

Just want to let Yaris owners know that TEIN USA is currently developing TEIN BASIC coilovers.

Product Description

TEIN Type BASIC damper is for the driver that is seeking high performance with a reasonable price. The Basic damper includes 4 springs and 4 shocks. Compared to the "sleeve type" coil over, the Type Basic has a more exclusive set up for a better balance of suspension travel and damping force.

* High performance and cost effective.
* Ride Height adjustable.
* New paint coating for rust prevention.
* Pillow ball mounts are optional (on certain applications).
* Exclusive design for USA vehicle specifications.
(only available for the U.S.A Market).
* Available for overhaul.



Contents of damper kit
Height Adjustable shock absorber x4, Main spring x4
Lower spring seat x4, Seat lock x4, Thrust washer x4
Bump rubber x4, Dust cover x4
Hook spanner x2, Instruction manual

I'll keep everybody posted :w00t:

[Idjiit]

This is the setup I'll be using, eventually.

[sroberts]

Approx cost?

[Idjiit]

Should be about $800.

[mikeukrainetz]

I contacted Tein directly like two / three months ago and it was still in development... when is it actually going to be sold ?

[birdy]

mmmm coilovers

[El Jefe]

very nice coilovers, i had them on my old 91 integra loved them to death. im not gonna spend that much on the yaris but its nice to have the option

[C2AUTOSPL]

Well, TEIN is not really very good in customer service...i was told another couple months. Tanabe will be releasing their springs sometime next month.

[Fat Felixxx]

Can you get the Tein Type Wagon coilovers for the vitz?

[Chris07LB]

Nice! :clap:

[TRD_Yaris]

update please!! i'm looking forward to height adjustability and something a bit more than the TRD setup....

[C2AUTOSPL]

Can you get the Tein Type Wagon coilovers for the vitz?

IM assuming you're asking for the JDM version since TEIN USA hasn't release any coilovers yet.

Unless you have the JDM VITZ then I can get the coilovers for you but it might take a few weeks.

[drell42]

do i have to jack up my car with those ones or are they the kind where i can pull over and do it on the side of the road? its a dumb question I know!

[Young-Adolf]

Yeah you will have to jack the car up, I suggest taking them in and having put on by a professional. I dont do springs, compressing them, taking them off, dont have the patience. Last I did was with a rusty mofo, so it was hard.

[IntensePower]

the tein has the ETA set for Sept 06 right now.

Part Number DSC10-LUAS2
Spring Rate 4/3.1kgmm
MSRP $990

EDFC will not be compatible

Intensepower
480-926-8797

[田中秀樹]

my friend drive another SW20 with Tein Basic. it horrible coilver. save money and get other tein, or other coilover make. tein basic not adjustable damper.