PDA

View Full Version : exhaust drone


corradovr6
10-10-2021, 06:20 PM
Recently joined the forum - really good site and loads of great info!

Bought t-sport 2002 recently and have been working my way through rectifying niggles etc. One such annoyance is the droning from the exhaust from around 2500 to about 3200 rpm. Really very intrusive in the cabin. It looks like the rear heat shield may not be there as the boot carpet and floor area get quite warm too - i've just added a few layers of Damplifier there as the floor is really thin! Just wondering if the two are related?
Anyone else had that drone and if so, what did you do to reduce it?
Thanks

lani100
10-25-2021, 03:10 PM
They are high revving tin cans at the end of the day. But as you already said sound deadening mats make a huge difference.

corradovr6
12-04-2021, 03:06 PM
Haha good description! Just changed the backbox which has reduced the drone but at 2500 to about 3000 its quite prominent. My old 1.3 cdx never had this and as they're practically identical (2nz and 1nz) i assumed it would be the same here?
Does adding weights to the exhaust do anything?

Kellyw
03-08-2023, 05:12 PM
Hi, I was wonder what the difference between a 2008 Yaris Hatchback and a Sedan Exhaust.

WeeYari
03-08-2023, 05:19 PM
Since the distance between the rear axle and the bumper on the sedan is significantly greater than the hatch, the sedan muffler assembly is much longer.

Kellyw
03-08-2023, 05:20 PM
Is there a difference between a 2008 yaris Hatchback and a Sedan Exhaust? I can't find a answer. Thanks

Kellyw
03-08-2023, 05:24 PM
Someone stold my exhaust and I bought a new one. I needed a Hatchback and they sent a sedan, I think. I cut it down to fit but for some reason it is hitting against the floor when you put it in gear?

Kellyw
03-08-2023, 05:29 PM
:thumbup:Since the distance between the rear axle and the bumper on the sedan is significantly greater than the hatch, the sedan muffler assembly is much longer.

Thanks

Kellyw
03-08-2023, 05:30 PM
Someone stold my exhaust and I bought a new one. I needed a Hatchback and they sent a sedan, I think. I cut it down to fit but for some reason it is hitting against the floor when you put it in gear?