PDA

View Full Version : Aftermarket exhaust options for a 2016 SE?

ncp131_kai
10-04-2022, 10:55 PM
Wanting to get an aftermarket exhaust for my 2016, SE 5dr, looking for recommendations to which one will fit

I’ve came across two, one is the The Revel Medallion Touring-S but states it excludes the SE trim from compatibility.

The only other one that may fit is the Blitz Nur VS but not sure if it’ll fit due to the reverse light in the center of the rear bumper.
WeeYari
10-05-2022, 12:22 PM
Since I don't believe there is any difference in the rear bumper facia on the SE, the Revel should fit, and they didn't bother testing it. In prior model years, the rear bumper had a lip installed which would make slight contact with the tip. Easily rectified with slightly longer exhaust hangers.
ncp131_kai
10-05-2022, 12:38 PM
Since I don't believe there is any difference in the rear bumper facia on the SE, the Revel should fit, and they didn't bother testing it. In prior model years, the rear bumper had a lip installed which would make slight contact with the tip. Easily rectified with slightly longer exhaust hangers.

Sweet! I wasn’t looking forward to that Japan shipping, I’ll order the Revel one. Thank you
WeeYari
10-05-2022, 01:10 PM
Oh man, am I going to feel like shit if for some reason it just won't work! Can't see it, but all the best.
mitch9521
10-06-2022, 05:16 PM
I have a Fujitsubo Authorize RM on my 2014, fits like a glove.

2015+ Yaris all share tailpipes and mufflers, 2012-2014 SE models had the chrome tip and slight S-bend which made them exit a little further to the right.
Neinris
10-14-2022, 10:53 AM
I have a 2008 HB, and the Tanabe Medallion exhaust. The only thing I'm a little disappointed about is that there's a choke point at the flange:

https://www.yarisworld.com/forums/attachment.php?attachmentid=61511&stc=1&d=1614916066

But as you can see, even when my rear axle frame is using the top holes to mount, there's plenty of clearance for the piping to not hit the axle frame, it's made for lowered Yaris'.

https://www.yarisworld.com/forums/attachment.php?attachmentid=61551&stc=1&d=1615157532

https://www.yarisworld.com/forums/attachment.php?attachmentid=61552&stc=1&d=1615157532

When I finally do the 2ZR swap I'll have that choke point fixed. :smile: