2011-2014 Toyota Vitz RS cluster pinouts [Archive] - Toyota Yaris Forums

mitch9521

10-13-2022, 06:22 PM

Hi guys, I am looking for the instrument cluster pin outs for the 2011-2014 Vitz RS(NCP131). I have the USDM ones but I cannot find a copy of the Japan market ones to compare to.

I have a gauge cluster from a Toyota Ractis that plays nice with my car except the HVAC and radio illumination does not work nor the ambient temp, so I would like to see if I can find a solution with swapping/adding pins.

mitch9521

10-15-2022, 04:41 PM

i tried finding on dealerships tis documents and we only have information on canada and mexico spec cars, i wish we can have the jdms repair manual so bad, ugh...

I've been trying for months to find some pinouts for the JDM cars, I wanna know whats different that isn't making the HVAC illumination work with the Japan market clusters lol. I have tried a Vitz G's and the Toyota Ractis cluster, same thing.

However I did find out why my cruise doesn't work with any Vitz cluster but works with the Ractis cluster. There are two LEDs soldered onto the board for the 'cruise' and 'SET' lights, if those are not present on the board like the Vitz cluster is, then the cruise circuits are broken and it will not work. The Ractis comes with cruise control in Japan so all of their clusters have those lights like the USDM and AUDM clusters and it works as it should.

Anyways, I may just end up tying into the parking light fuse at the kick panel with a 5amp fuse and 'add-a-fuse' and run it to the positive illumination wire before the HVAC controls, I'd rather not do it that way but if I have to, then I will.

Nobody has really messed with the wiring intricacies of the 3rd gens so I'm kinda blazing my own trails on what works and what doesn't lol. Its too bad CTScott isn't really active anymore, I'm sure he would have some insight.