3rd Gen front seat electrical connections

[Kasbien]

Can someone with a 3rd gen Yaris grab a photo of the electrical connections under the driver/passenger front seats for me please? Trying to figure out if the plugs are the same as the 2nd gen before I purchase a pair of seats from an online wrecker. Thanks!

[WeeYari]

Gen3 seats into a Gen2 has been documented a couple times here. Don't recall anyone having issues with electrical connections. Only thing I do recall is an ever so slight difference in mounting holes. You have to place all 4 bolts in loose before tightening any of them. One other thing is a locator pin on a rail needs to be cut off.

[WeeYari]

Oops, just noticed you have a sedan. Experiences I know of were for the hatchback.

[Kasbien]

Gen3 seats into a Gen2 has been documented a couple times here. Don't recall anyone having issues with electrical connections. Only thing I do recall is an ever so slight difference in mounting holes. You have to place all 4 bolts in loose before tightening any of them. One other thing is a locator pin on a rail needs to be cut off.

Yes I recall the thread you speak of depicting this. I noticed that user is from Australia didn't make any mention of the connectors, so I just wanted to "double-confirm" for North American vehicles. Options are limited if you want working airbags with your seat swap as CTScott no longer produces his bypass kit for the electronics side of things.

[Kasbien]

Bump.

[Sokal13]

I'll post a photo this weekend. In the mean time, Gen3 seats have two air bag connectors + the seat belt connector. Assuming Gen2 is the same as the xD, then one airbag connector will go unused.