2003-2006 Yaris stereo wiring remote

[sighnbox]

Hi every one new to the site
Ok its a 2005 Toyota Yaris 1.0 VVT-i Colour Collection 5 Door

and I believe called a MK1 phase 2

Ok Ive removed the old stereo and put in my nice new sony what a improvement but Id like to get the steering wheel controls working but no one makes a exact one for this yaris so Ive brought a Connects2 CTSTY001.2 wat works with a Toyota Yaris With Fujitsu Ten/Matsushita ........

Ok Ive included a pic of the Yaris my dash as was and the 3 plugs from the back of the stereo and bottom pic is the Connects 2 plugs The right plug being the one I think wont fit my plug

I think pug 1A (blue plug) will fit ok and the white 4 pin plug......Its plug 2A with the two wires (pink/silver dash and green/silver dash) ..........that wont fit so .......

1st what are these wires for I presume key 1 and key ????

The corresponding plug (that dont fit) on the Connects2 has 3 wires different colors ......a black which presume is ground and a pink and looks like blue with poss a black line ..............

Happy to cut soldier etc and help PLEASE

[kevinj93]

The connector with just the three pins is for the steering wheel remote controls. These should be positions 6, 7 and 8 of the 20 positions available in the plug. Looking at the pins in the plug, number 6 all be the one closest to the centre.

These are (pin 6) Steering Switch ground, (pin7) Steering Switch 1 and (pin 8) Steering Switch 2.

The Seek and Volume buttons provide different resistances to Steering Switch ground on the Steering Switch 1 pin. The Mode button shorts Steering Switch 2 to Steering Switch Ground. If you have the phone On/Off hook switch, it provides resistances from Steering Switch 2 to Steering Switch Ground.

[sighnbox]

Hi yes all done the volume works up and down and up and down on tracks playing and as said press the MODE button and it all locks up until you then select USB again on the head unit

Thanks

[sighnbox]

Thanks there

[sighnbox]

Update all sorted the mode working as well now it was the Connects2 unit its self it was set for Pioneer inside not Sony ........Re set it and bang every thing works now Thanks