Please help with this part number.

[Ukrainian]

Hello,
I am having a hard time of finding part number of this body plug.
Toyota echo 2004 HB
This plug is located outside on both sides under the driver’s and passenger floors.
I have included a picture of this plug next to a metric ruler.
https://thumbs4.imagebam.com/f3/80/93/MEPHN0C_t.jpeg (https://www.imagebam.com/view/MEPHN0C)
https://thumbs4.imagebam.com/1c/99/ea/MEPHN0D_t.jpeg (https://www.imagebam.com/view/MEPHN0D)

[Ukrainian]

Body location on a passenger side (identical location on the driver’s side).
Also a question, there is another smaller hole picture 3 next the big one, which is not covered by anything. Should it be plugged as well? Thanks
https://thumbs4.imagebam.com/e7/c4/ec/MEPHN7D_t.jpeg (https://www.imagebam.com/view/MEPHN7D)

https://thumbs4.imagebam.com/1a/a2/e8/MEPHN7C_t.jpeg (https://www.imagebam.com/view/MEPHN7C)


https://thumbs4.imagebam.com/b8/08/ce/MEPHN7B_t.jpeg (https://www.imagebam.com/view/MEPHN7B)

[lani100]

https://parts.scarboroughtoyota.ca/a/Toyota__Echo/48631847__5972530/REAR-BODY--FLOOR-FLOOR--RAILS/8326550.html

[Ukrainian]

https://parts.scarboroughtoyota.ca/a/Toyota__Echo/48631847__5972530/REAR-BODY--FLOOR-FLOOR--RAILS/8326550.html

Thanks. This diagram doesn’t appear to have mine plugs.
I got another response on the other website.
I believe this is the part number for the big hole: 9095001759
According to the parts diagram the Smaller hole should be covered too. I believe this is the number: 9095001006
Parts diagram: https://toyota-usa.epc-data.com/echo/ncp13l/4/body/5305/?partno=9095001759

[Compeer]

Hello,
I am having a hard time of finding part number of this body plug.
Toyota echo 2004 HB
This plug is located outside on both sides under the driver’s and passenger floors.
I have included a picture of this plug next to a metric ruler.
https://thumbs4.imagebam.com/f3/80/93/MEPHN0C_t.jpeg (https://www.imagebam.com/view/MEPHN0C)
https://thumbs4.imagebam.com/1c/99/ea/MEPHN0D_t.jpeg (https://www.imagebam.com/view/MEPHN0D)

Just measure the hole and search "Rubber blanking grommet". Aliexpress has them as well as amazon etc. Find one close enough and use a dab of silicon around the edge if its not perfect.