PDA

View Full Version : Razo GTスペックペダルセット RP104 Pedal Covers

bigsky2
06-14-2006, 02:24 AM
Show and tell time, albeit a bit late since they've been installed since May :biggrin:

Spec:
Razo GTスペックペダルセット RP104 Pedal Covers
Aluminum Alloy with Carbon Fiber Insert
RP104 is the S size, the pedals are somewhat smaller for compact spaces
New for 2006

Out of the Box
http://members.shaw.ca/bigsky2/pedals/DSC_2774.jpg


Stock
http://members.shaw.ca/bigsky2/pedals/DSC_2779.jpg


Gas Pedal Done, two more to go
http://members.shaw.ca/bigsky2/pedals/DSC_2781.jpg


Brake Pedal Done, one more to go
http://members.shaw.ca/bigsky2/pedals/DSC_2791.jpg


Clutch Pedal Done, checking fit on brake
http://members.shaw.ca/bigsky2/pedals/DSC_2805.jpg


Finished Product, bad picture
http://members.shaw.ca/bigsky2/pedals/DSC_2806.jpg

Finished Product, somewhat better picture
http://members.shaw.ca/bigsky2/pedals/DSC_2807.jpg


Now if only installing them went just as fast as those pictures did...
C2AUTOSPL
06-16-2006, 09:35 PM
that looks nice...
drell42
06-16-2006, 10:17 PM
I REALLY like those! Very nice
SmellyTofu
06-17-2006, 09:06 AM
All good for LHD... RHD is impossible to fit a suitable accelerator pedal. Here's a pic of my pedals.
bigsky2
06-18-2006, 12:11 AM
Tofu,

I'm surprised your gas pedal is small like the brake/clutch pedals.

The RHD vehicles I've seen in Canada (mainly Skylines, Silvias, FC RX-7s) have two small brake/clutch pedals and one larger gas pedal.

Is your Razo accelerator gas pedal cover too big to fit onto yours?
There looks like quite a bit of room on the left and right, but I'm not sure how big your gas pedal cover is.
SmellyTofu
06-18-2006, 02:01 AM
Actually, standard. The pedal placement is horrible. Brakes are towards the clutch and heel toe is possible but a stretch. This is the main reason I got these pedals was to notionally move the brake pedal towards the accelerator somewhat and reduce the stretch.

The accelerator won't fit because it will not clear the floor area at even half throttle. That is the reason the accelerator is not a rectangular shape.

The brake and clutch pedals are the same size as your's... doesn't seem to be any different. The pedal cover just makes the supersized.