joey1320
08-19-2007, 03:59 PM
so i sold the Garrett GT2056 from the VW Jetta and found a used Garrett T25 from a MazdaSpeed Protege with really low miles and in great shape on Craigslist(las vegas). the turbo is a T25 internally wastegated at 6psi which will be ok for my build a the moment.
i also orderedt eh emanage support tool to hook it up to the laptop when i go to the dyno. and i ordered the raduis plate to use on the manifold. i will have to modify for the t25 inlet but it will work better than the GT2056.
so if all works ok i should have the flanges next week and i can continue with the project. hopefully finish by the end of the month.
heres the pics:
http://www.imagestation.com/picture/sraid225/pbc2460dda152afc1c0ce3c0f9d1c1406/e8115018.jpg
http://www.imagestation.com/picture/sraid225/p348fc0d7a9c5043b9b764712b2bba63a/e8115013.jpg
http://www.imagestation.com/picture/sraid225/p893de36bc40231992b55a3c0541aa8a3/e811500b.jpg
http://www.imagestation.com/picture/sraid225/pa9751c15a4ed0d1f156f95c297df26a9/e8114be1.jpg
http://www.imagestation.com/picture/sraid225/p729c98f61bc83c6eae1e171f513cfb89/e81136cf.jpg
http://www.imagestation.com/picture/sraid225/p8da3567db95246168feb3d5e6a21ce93/e8114a33.jpg
this is the radius plate for the manifold. got it from: http://www.jgstools.com
http://www.jgstools.com/turbo/tk075.jpg
i also orderedt eh emanage support tool to hook it up to the laptop when i go to the dyno. and i ordered the raduis plate to use on the manifold. i will have to modify for the t25 inlet but it will work better than the GT2056.
so if all works ok i should have the flanges next week and i can continue with the project. hopefully finish by the end of the month.
heres the pics:
http://www.imagestation.com/picture/sraid225/pbc2460dda152afc1c0ce3c0f9d1c1406/e8115018.jpg
http://www.imagestation.com/picture/sraid225/p348fc0d7a9c5043b9b764712b2bba63a/e8115013.jpg
http://www.imagestation.com/picture/sraid225/p893de36bc40231992b55a3c0541aa8a3/e811500b.jpg
http://www.imagestation.com/picture/sraid225/pa9751c15a4ed0d1f156f95c297df26a9/e8114be1.jpg
http://www.imagestation.com/picture/sraid225/p729c98f61bc83c6eae1e171f513cfb89/e81136cf.jpg
http://www.imagestation.com/picture/sraid225/p8da3567db95246168feb3d5e6a21ce93/e8114a33.jpg
this is the radius plate for the manifold. got it from: http://www.jgstools.com
http://www.jgstools.com/turbo/tk075.jpg