PDA

View Full Version : factory stickers


casterqc
07-04-2006, 12:39 PM
Does anyone else have factory stikers on the bottom of each side of their Yaris...they're the same color of the car.

I'm trying to figure out if I can take these of...are they used for some kind of protection or to hide something?

http://images6.theimagehosting.com/factorystikers.jpg (http://www.theimagehosting.com)

Chris07LB
07-04-2006, 01:04 PM
Most cars have them. Rock and scuff guards.

mikeukrainetz
07-04-2006, 05:50 PM
part of the cold area packages to prevent rock chips

SmellyTofu
07-04-2006, 06:51 PM
And they are clear.... most turn yellow after being in the sun. UV degradation happens quick.

swng
07-04-2006, 06:55 PM
I have them too. I am not sure about their purpose(s) and I am not going to take them off without a strong reason.

eight_heads
07-04-2006, 07:09 PM
they are to prevent chipping same as the texture on the bottom of the car(it's bumpy)... anyway, you should leave them, actually cars like porsche 911's come with them stock too :p

Chaad32
07-14-2006, 04:56 PM
Alot of cars have these now, you just don't really notice because they hide pretty well.

casterqc
07-14-2006, 05:07 PM
I'll leave it on the car for now but I guess I will have to take it off next year because there is already little air bubbles under the stikers.

Chaad32
07-14-2006, 05:47 PM
I had a ford with this on it and the underneith part was not painted the same as the rest (as in if you peel off the sticker it might not be painted under there). I sugest just taking a pin to the air bubbles and pop them and then just press down on the section to get the air bubbles out.

robcrowell
07-15-2006, 01:53 PM
It's usually a 3M pprotectant sticker and is clear. They do not yellow, crack or bubble today. I suppose years down the road they might, but they are put on to protect areas that get chipped easily.

3M makes a "clear bra" made out of the same material. I don't know if they have one for Yaris yet. The "clear bra" covers the painted surfaces on the front of the car to protect it. I'm not a big fan of it, but it sure beats the old black vinyl bras that you used to see on cars all the time.

PixieDawn
07-15-2006, 04:59 PM
3M makes a "clear bra" made out of the same material. I don't know if they have one for Yaris yet. The "clear bra" covers the painted surfaces on the front of the car to protect it. I'm not a big fan of it, but it sure beats the old black vinyl bras that you used to see on cars all the time.

They do lol.. its all over EBAY :thumbup:

Moose
07-15-2006, 05:53 PM
They do lol.. its all over EBAY :thumbup:

Most car customization shops apply them- actually, the best place to go may be the dealership- they will have contacts in the area that can do it, and the dealership will stand behind their work.

PixieDawn
07-15-2006, 08:47 PM
ohh i dont want one lol.. but thanks for the advise :0) no rocks or salt in fl.. not much of a need...

TRD_Yaris
07-16-2006, 05:26 AM
Most cars have them. Rock and scuff guards.

after a few years these guards will discolor and degrade. They are rather easy to remove on a hot day. Though, i would only remove them if they look worse than a few rock chips would look.

Chris07LB
07-16-2006, 11:27 AM
after a few years these guards will discolor and degrade. They are rather easy to remove on a hot day. Though, i would only remove them if they look worse than a few rock chips would look.

Even on Polar White, they are not "that" noticable.. I would love to get the RS skirts, and call it a day though! :biggrin:

heatherw_01
06-21-2007, 06:53 AM
I think I have these, anyone have a picture so I can compare as the one the op posted is not showing

Chris07LB
06-21-2007, 08:16 AM
Go look in front of your REAR tires on each side... it will be plain as day if you have them or not.