Log in

View Full Version : EBay: Yaris Intake Manifold

ChinoCharles
10-21-2008, 12:09 PM
Who knew?

http://cgi.ebay.com/ebaymotors/Toyota-Yaris-GSR-Intake-Manifold_W0QQitemZ280274095601QQcmdZViewItem?_trks id=p4506.m20.l1116

9090

Not saying I'd buy it, just saying it's there. I see two different prices... $850 and $1050.
Malaya1221
10-21-2008, 12:13 PM
it is probably made out of used cell phones!

seller: cellphoneparadise_dot_net:biggrin:
ChinoCharles
10-21-2008, 12:15 PM
No, no, no... you've got it all wrong. It is made of all of the Zage turbos that exploded.
largeorangefont
10-21-2008, 12:48 PM
Yaris GSR huh??

You'd lose some bottom end, but gain some top end with that... if it even fits.

Would be great for a nitrous setup.
ChinoCharles
10-21-2008, 12:57 PM
Ashley, there were 3 listed... Yaris B16, Yaris GSR and something else. I think they may have adapted the sales pages from another OH SO POPULAR manufacturer. :wink:

39... do you smell fraud?
largeorangefont
10-21-2008, 01:02 PM
Ashley, there were 3 listed... Yaris B16, Yaris GSR and something else. I think they may have adapted the sales pages from another OH SO POPULAR manufacturer. :wink:

39... do you smell fraud?


Yea... Those LOOK like honda manifolds from the picture... I'd stay away.
ChinoCharles
10-21-2008, 01:03 PM
So what... one of these, some nitrous, and some management? What could we expect?
largeorangefont
10-21-2008, 01:44 PM
So what... one of these, some nitrous, and some management? What could we expect?

I would say you wouldn't want to spray more than a 75 shot... ever, and it would probably best to keep it around a 50 shot for engine longevity.

Hondas used to bend rods with less than a 75 shot on a stock motor, and I haven't seen what the rods or pistions look like in these engines.

If you had a progressive controller you might be able to run a 75 shot all the time and ramp up to it, but just the simple switch on to the 75 shot would most likely hurt the engine pretty quickly.
Nexus1155
10-21-2008, 02:19 PM
143 Yaris GSR <3
ddongbap
10-21-2008, 06:00 PM
Dude, the dealer never told me about the GSR model. I'm furious now. And fast. HAHA!
PHXDEMON
10-21-2008, 06:14 PM
With the quality of that manifold it shouldn't cost more than 200 bucks :laugh:
Treyz
10-21-2008, 06:29 PM
Exactly .. saw these a while ago .. I cracked up at the GSR and B16. It's totaly square itself. I think some curves are needed for better airflow.
ztrack157
10-22-2008, 01:13 AM
Our rods looks like pencils on our motor and will be the first thing to go with NOX. might as well buy an Xb manifold and make an adapter plate. To bad Tricky Dicky pulled all our chains and never produced the intakes or turbo set up.
Letsrock
10-22-2008, 09:35 AM
Notice the (4) by the seller name. Stay away.
ChinoCharles
10-22-2008, 12:16 PM
... cook it with some cherry sauce and fresh thyme?
eii
10-22-2008, 12:20 PM
... it could possibly be a swan?
SweetRS
10-22-2008, 01:59 PM
yeah...they definatly dont make those manifolds for the yaris....its fraud...
RagnaCaT
10-22-2008, 03:22 PM
Yep stay away!
ddongbap
10-22-2008, 03:46 PM
Exactly .. saw these a while ago .. I cracked up at the GSR and B16. It's totaly square itself. I think some curves are needed for better airflow.

Some of the best B-series mani's are square like that.
SweetRS
10-22-2008, 05:35 PM
oh i agree....too bad we have 1nfze's....actually every b-series acura/honda ive owned was junk and always had problems...and i have yet to have any with the 1nfze.