The custom/aftermarket exhaust thread! [Pics + Videos]

[Gideon]

I see we have an aftermarket rim thread for those looking to see what rims/tires they should run, but how about we have a thread to post our custom and aftermarket exhausts in?

If it's aftermarket, obviously state the manufacturer, if it's custom, let us know most of the details. Here's mine as an example:

Custom cat back, stock resonator, 2.25" piping, Magnaflow Performance muffler #11224, Silverline resonated dual stainless steel tips.

http://img.photobucket.com/albums/v146/hyenaboi/exhaust1.jpg
http://img.photobucket.com/albums/v146/hyenaboi/exhaust2.jpg
http://img.photobucket.com/albums/v146/hyenaboi/exhaust3.jpg

Light reving parked:
http://img.photobucket.com/albums/v146/hyenaboi/exhaust/th_CIMG1088.jpg (http://smg.photobucket.com/albums/v146/hyenaboi/exhaust/?action=view&current=CIMG1088.mp4)

Quick drive, stationary outside vehicle:
http://img.photobucket.com/albums/v146/hyenaboi/exhaust/th_CIMG1089.jpg (http://smg.photobucket.com/albums/v146/hyenaboi/exhaust/?action=view&current=CIMG1089.mp4)

Inside the vehicle, 0-60ish:
http://img.photobucket.com/albums/v146/hyenaboi/exhaust/th_Movie.jpg (http://smg.photobucket.com/albums/v146/hyenaboi/exhaust/?action=view&current=Movie.mp4)

[Klink10]

Mine- Thunder exhaust from Kargoboy

[eTiMaGo]

Well here are the 2 exhausts I have used so far, first the HKS Hi-Power, friggin noisy but a good tone... Pics with both the regular bumper and the RS. Exhaust currently owned by ChinoCharles, a collector's item of YW lore :biggrin:

videos:
http://www.youtube.com/watch?v=K1KCFDCffuA
http://www.youtube.com/watch?v=w-PMaIB0PdU

[eTiMaGo]

And now the Nitto exhaust which is far more "grown up", sound wise... Also shown with the matching mid-pipes

videos:
http://www.youtube.com/watch?v=DsYaQ-ntr3M
http://www.youtube.com/watch?v=0OplLi-9lzY

[largeorangefont]

Info on my setup is here:
http://www.yarisworld.com/forums/showthread.php?t=9520

http://i15.photobucket.com/albums/a386/largeorangefont/IMG_1362.jpg
http://i15.photobucket.com/albums/a386/largeorangefont/IMG_1360.jpg
http://i15.photobucket.com/albums/a386/largeorangefont/IMG_1359.jpg

Vid

http://i15.photobucket.com/albums/a386/largeorangefont/th_MVI_1342.jpg (http://s15.photobucket.com/albums/a386/largeorangefont/?action=view&current=MVI_1342.flv)

[CASTREX]

2.25" pipe from the primary cat back. Secondary cat deleted.
One Magnaflow 4" round 18" long muffler replacing the OE resonator and another Magnaflow 5"round 14" long in the back. Resonated 4" ss tip.

Video: http://www.youtube.com/watch?v=A6Pp1IuJzG8

[vios7]

everyone looks great...

anyone here have sedan A/T and modified the exhaust? . any tips?

Thanks

[PETERPOOP]

JDM Blitz NUR Spec S Axle Back Exhaust.



http://img.photobucket.com/albums/v459/peterpoop/CIMG3313.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3315.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3316.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3322.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3324.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3336.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3337.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3338.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3342.jpg

http://img.photobucket.com/albums/v459/peterpoop/CIMG3343.jpg


Idling/revving...

http://www.youtube.com/watch?v=HyPad-mHupo

[Japmuscle]

Has anyone else besides me just removed the muffler? I have the three stock cat's and a duel tip and it actually sounds good, loud in cab tho. I will try to get a vid on here somewhat shortly

[revoturbo]

for turbo engine , do not use this muffler. (blitz nur specs). this multi chamber muffler with Jasma approved use multichamber construction, not free flow.

[TKO]

2.25" pipe from the primary cat back. Secondary cat deleted.
One Magnaflow 4" round 18" long muffler replacing the OE resonator and another Magnaflow 5"round 14" long in the back. Resonated 4" ss tip.

Video: http://www.youtube.com/watch?v=A6Pp1IuJzG8

I love your setup! Would you have any part numbers for your peices?

[CASTREX]

I love your setup! Would you have any part numbers for your peices?

I don't have the part numbers but you can figure them out by the messurements if you go to the magnaflow website.

I used a 18" long 4" round resonator in the front Did not went 5" in the front to have a good ground clearance.
And the resonator in the back is a 14" long 5" round. Diameter is 2.25

I also removed the secondary cat.

And at the end just used a random resonated tip I found for cheap on ebay.:w00t:

[Split]

in car exhaust clip: http://www.youtube.com/watch?v=AXAyTLtkHOs
unfortunately you can mostly only hear the intake. when its warmer out i'll try doing one with the winters down.

intake: Simota CAI converted to SRI with Bomz (Apex-i Style) Cone Air Filter
axle back: Nitto
mid pipe: stock mid-pipe with resonator and second cat replace with a cherry bomb glass-pack

I used to have the nitto mid-pipe in which sounded a tiny bit deeper (maybe 1dB less loud too), and maybe made like 1hp more.. but I didn't want to run cat-less so this way at least I have one cat.

[Gideon]

http://img.photobucket.com/albums/v146/hyenaboi/th_Movie.jpg (http://smg.photobucket.com/albums/v146/hyenaboi/?action=view&current=Movie.flv)

Dunno why I didn't add this one too when I made the thread, but one of my exhaust inside the car.

[lilredrocket]

I'm looking for a little more of a raspy exhaut not the deep civic noise. Do you guys/ gisls have any ideas?

[Kaotic Lazagna]

You all have seen pics of my car already :tongue:, so I'm just going to post the vid:

http://www.youtube.com/watch?v=xfOsST0HFNc

[Kaotic Lazagna]

I'm looking for a little more of a raspy exhaut not the deep civic noise. Do you guys/ gisls have any ideas?

I like deep, but if it's a raspy sound you want, stay away from Magnaflow and Flowmaster. Also, replace the resonator with just a pipe.

[Kaotic Lazagna]

Has anyone else besides me just removed the muffler? I have the three stock cat's and a duel tip and it actually sounds good, loud in cab tho. I will try to get a vid on here somewhat shortly

2 catalytic converters and one resonator :tongue:

[Gideon]

You all have seen pics of my car already :tongue:, so I'm just going to post the vid:

http://www.youtube.com/watch?v=xfOsST0HFNc

Nooooo, post everything you got! This thread is for anyone who is looking for exhaust options, the more you post (one of the few sedans with a custom exhaust) the better. :biggrin:

[ChinoCharles]

Well here are the 2 exhausts I have used so far, first the HKS Hi-Power, friggin noisy but a good tone... Pics with both the regular bumper and the RS. Exhaust currently owned by ChinoCharles, a collector's item of YW lore :biggrin:


The ONLY HKS Hi-Power axleback in the states. Prove me wrong. :biggrin: I'm SO happy with it. Exactly what I expected from HKS. Thanks a million bajillion Thomas.

[Kaotic Lazagna]

Nooooo, post everything you got! This thread is for anyone who is looking for exhaust options, the more you post (one of the few sedans with a custom exhaust) the better. :biggrin:

Okay...hehehe...photo-whoring time :laugh::biggrin::tongue: :

http://i208.photobucket.com/albums/bb261/YarisKaos/05-09-08/DSC_0189.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/05-09-08/DSC_0184.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/05-13-08/DSC_0085.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/05-17-08/DSC_0177.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/07-19-08/BoatDockingHDR7small.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Cherry%20Picking%2005-30-08/DSC_0754.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Mid%20March%20Car%20Meet/100_2060B.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/JDM%20Theory%2001-13-08/P1132655B.jpg

[Kaotic Lazagna]

http://i208.photobucket.com/albums/bb261/YarisKaos/Exhaust%20Note/th_114.jpg (http://s208.photobucket.com/albums/bb261/YarisKaos/Exhaust%20Note/?action=view&current=114.flv)

http://i208.photobucket.com/albums/bb261/YarisKaos/Exhaust%20Note/th_115.jpg (http://s208.photobucket.com/albums/bb261/YarisKaos/Exhaust%20Note/?action=view&current=115.flv)

[mrbond]

http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0061.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0060.jpg

The Megan axle-back. Had a real nice low growl. None of those farty sounds you get from really really cheap systems.

Btw, kaotic lazagna, you've got one absolutely awesome sedan. Kinda makes me wish I had gotten one :iono:

[eii]

Video and pix of my TRD axel-back and video of bxrich's nitto axel-back he bought from cali yaris. Both are for the sedan.

My TRD Exhaust

Video: http://www.inimi.org/downloads/trdexhaust.avi

Pix:

http://www.inimi.org/images/exhaust5.jpg

http://www.inimi.org/images/exhaust6.jpg

Bxrich's Nitto Exhaust

Video: http://www.inimi.org/downloads/bxrichnitto.avi

[mrbond]

Coheed, here you go:
http://www.youtube.com/watch?v=sNk2b-_osU0
Btw, I really recommend getting stronger hangers for the Megan. It's heavier than the stock axle-back, and you can see it shudder when I turn the car off. But in any case the price was right.

[N3misiS]

Guys,

You guys do really Awesome Jobs on the Yari Sadan, they look really Awesome,

Here is my pic, I have a full F1-X SYstem de-Cat, it is nite time here, so sorry about the pic quality...

[Jerkratt]

Mr. Bond, do you have any vids? I'm really considering getting this over making my own. But I've only found 2 good vids of this exhaust.

heres the vid i took of the megan axle-back.. on my 07 before i totaled it...
http://img.photobucket.com/albums/v662/everdying69666/My%20Yaris/My%20Yaris%20Videos/th_02f285c8.jpg (http://smg.photobucket.com/albums/v662/everdying69666/My%20Yaris/My%20Yaris%20Videos/?action=view&current=02f285c8.flv)

ill take a video of the greddy Ti-C on the 08 tomorrow giving its not still raining...

[N3misiS]

Yo Guys,

I have the Dyno tests, I need to scan them and post them,
any way here are more foto's, I wish my camera was working!!!:mad:

But I took a few more pix with my phone...


Oh and remember, I am in SOuth africa, we do not really care about the enviromental stuff, we do not have even close he trafic amount you gius do, although it can get busy, I mean where doesnt it.

[TOUGEghost]

Stock vs DC Sports header:
http://img.photobucket.com/albums/v621/Whitehot/Yaris/dcvsstockheader.jpg

Installed:
http://img.photobucket.com/albums/v621/Whitehot/Yaris/installed.jpg

Greddy Ti-C:
http://img.photobucket.com/albums/v621/Whitehot/Yaris/tiC1.jpg

http://img.photobucket.com/albums/v621/Whitehot/Yaris/tiC2.jpg

[1NZYaris1]

Did this a couple of months ago

[LtNoogie]

I've GOT to remove my TRD exhaust. At the last meet, I found out how much louder it is than the others.

That lovely deep rich sound when you are outside, becomes this unbearable booming sound inside from 1800 to 2500 RPM. Right where I do most of my driving.

[1NZYaris1]

Thats hot man. Is that the stock but with a custom pipe on it? Its nice either way.:cool:

Yes it is , stock with custom pipe work , no need for axle or cat backs here
as we have a 90 decibal limit on Exchaust noise .:cry:

[mikenacarato]

http://memimage.cardomain.com/ride_images/3/2728/2501/31818750010_large.jpg

TRD exhaust on my 09 3dr. LB

[bikegerm]

Tanabe Medalion Touring. I love the sound of it. Not too loud at all !

[Treyz]

I'm aiming for the Greddy I think. I need to replace the Toyota tip on the stock exhaust lol.

Stock with Toyota Liftback tip ... does give a little flare, but need to go with performance now.
http://i6.photobucket.com/albums/y203/Treyz/DSC01495.jpg

http://i6.photobucket.com/albums/y203/Treyz/100_2598-1.jpg

[1nz]

http://i60.servimg.com/u/f60/12/70/12/78/img_3815.jpg
http://i60.servimg.com/u/f60/12/70/12/78/img_3822.jpg
http://i60.servimg.com/u/f60/12/70/12/78/img_3817.jpg


2" Stainless steel
Still looking for a nice exhaust tip, trd replicas or rice fake titinium coated??

[06silveryaris]

Hiii...am loooking to add an exhaust system for my yaris hatchback the problem is i couldnt get any here in Bahrain,and i checked online but the shipping price is too much,some friends told me to do custom one do u recommend that?and like just adding a Hks or greddy muffler?

Go custom, this way you can go cat back rather then just axle back(rear section) and get it done localy without crazy shipping charges. As far as the muffler those will work and you can also try a dynomax turbo muffler or similar, which will keep the sound deep and very pleasant.

[mrbond]

Just received and installed the Fujitsubo Wagolis axle-back. Cost me $439 shipped. Has a BEAUTIFUL sound, yet you can't hear it in the cabin during normal driving. Will post sound clips once it stops snowing, etc.
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0212.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0213.jpg
beautiful weld work
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0215.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0214.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0216.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0217.jpg
http://i395.photobucket.com/albums/pp39/mrporsche1988/DSCF0218.jpg

[1nz]

http://i60.servimg.com/u/f60/12/70/12/78/img_3815.jpg
http://i60.servimg.com/u/f60/12/70/12/78/img_3822.jpg
http://i60.servimg.com/u/f60/12/70/12/78/img_3817.jpg


2" Stainless steel
Still looking for a nice exhaust tip, trd replicas or rice fake titinium coated??

http://i60.servimg.com/u/f60/12/70/12/78/power10.jpg

[cleong]

http://eaglet.org/albums/STPowered/IMG_0004.jpg

http://eaglet.org/albums/STPowered/IMG_0009.jpg

http://eaglet.org/albums/STPowered/IMG_0008.jpg

http://eaglet.org/albums/STPowered/IMG_0004.jpg

And the sound clip:

http://www.youtube.com/watch?v=X342NigBg2g

[thebarber]

ooo, that fujitsubo sounds nice!

ive just got a tip right now...but i have a megan exhaust waiting for spring!

http://i22.photobucket.com/albums/b339/dabarber/yaris/pei/pei005.jpg

http://i22.photobucket.com/albums/b339/dabarber/for%20sale/yarisparts009.jpg

[mrbond]

Sorry for this noob quesiton but whats the difference between the catback and the axle back?and is it true that the axle back has no increase on the HP?

It's not necessarily true that an axle-back won't increase horsepower. It depends on how restrictive it is and/or the baffling design. It is mainly for sound, however, due to the design of the Yaris exhaust system, that's the only thing you can change other than getting a whole midpipe. A catback system goes from the catalytic converter all the way to the tip, and will result in a higher hp gain.
Hope that helps.

[thebarber]

It's not necessarily true that an axle-back won't increase horsepower. It depends on how restrictive it is and/or the baffling design. It is mainly for sound, however, due to the design of the Yaris exhaust system, that's the only thing you can change other than getting a whole midpipe. A catback system goes from the catalytic converter all the way to the tip, and will result in a higher hp gain.
Hope that helps.
you can always cut your midpipe after the resonator (which is 2" thru) and replace the res-back piece which is 1.75" with a bigger pipe. just weld it on....i had to do that w/ my XRS and my magnaflow catback i bought for it....either clamp or weld...

from what i read, you gain tq across the powerband (thus increasing hp past 5800 or so fairly significantly) with just an axleback due to the stock mufflers extremely restrictive design...

[Klink10]

That Fuji does sound nice, appears well constructed also.

[coheed]

Where did you buy the fujitsubo? I cant find it anywhere.

[mrbond]

Where did you buy the fujitsubo? I cant find it anywhere.

go to boomplustoys.net. they don't have it displayed ANYWHERE on their site, but I saw an old thread somewhere on this forum where they said they had the Fujitsubo Wagolis available for $439 shipped. Just email them and ask about it. Tell them Kirk referred you!

[frownonfun]

so uh... i thought i was following all this exhaust stuff but now after reading this thread i'm a little unsure. if i want to replace my exhaust from the header back what parts do i need exactly? and is that going to be really loud? would it be worth the trouble from a performance standpoint? would i be better off just replacing cat back?

[Havoc]

Tanabe Concept G Axle-Back 2009 3dr

http://www.bwcorridor.com/images/yaris/tanabe exhaust.jpg

[lilredrocket]

^Very nice. Sound clip? Oh and welcome to the fourm!!

[BLAZINBLUEVITZ]

i see no one has posted up the JDM TRD VITZ muffler. looks like i'll have to represent.......

[Havoc]

^Very nice. Sound clip? Oh and welcome to the fourm!!

Thank you lilredrocket! Well the engine was cold and I just installed this Saturday, 2 days ago, so there's some smoke.

EDIT: Oh and there's an Injen CAI on the other end.

www.bwcorridor.com/images/yaris/P1000988.wmv

[PETERPOOP]

Thank you lilredrocket! Well the engine was cold and I just installed this Saturday, 2 days ago, so there's some smoke.

EDIT: Oh and there's an Injen CAI on the other end.

www.bwcorridor.com/images/yaris/P1000988.wmv

I always like videos. Seems strange for the tip being so short right off the muffler. Kinda sounds a little too "ricey" for me. But looks good overall!

[mrbond]

so uh... i thought i was following all this exhaust stuff but now after reading this thread i'm a little unsure. if i want to replace my exhaust from the header back what parts do i need exactly? and is that going to be really loud? would it be worth the trouble from a performance standpoint? would i be better off just replacing cat back?

Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D

[frownonfun]

Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D

most definitely thanks... thought i was being ignored. :cry:

[mrbond]

most definitely thanks... thought i was being ignored. :cry:

Lol, yeah I was going through some threads I wrote in a while back and I saw that no one had replied to you yet. I hate it when people don't answer my questions, so this is my way of working with karma :laugh:
But yeah, the most amount of play you'll have is with the headers. Some improve the power more at the lower end of the rpm band, some at the middle, some at the top. The DME header is best, imo, for just spirited around-town driving. It's pricier than most, but not by much.
Cheers! Always eager to help out fellow Yaris owners - especially ones that like the new iQ (I'm buying that as soon as the first-year bugs are out :thumbup:)

[mrbond]

Yahoo!! I finally got youtube to upload my exhaust clip! here it is: http://www.youtube.com/watch?v=sIkmbeH3vn0
I'll try putting up a better one later.

[PETERPOOP]

2.25" mandrel bent Header back exhaust with a magnaflow muffler. Oh yah, I have a resonator too, even though you can't tell! hah

Be sure to click "HQ" below the video player for both videos to view it in High Quality!

Here's a video that shows the muffler and some clips of me driving the car with the camera inside:

http://www.youtube.com/watch?v=My6Rh6VhdzA

Here's my doing a fly by the camera:

http://www.youtube.com/watch?v=FdcMqbM7Ec0

[anonymous user]

Hey thanks! It IS loud. haahha. I'm working on getting a longer resonator and maybe throwing a hi flo cat on there.

Hawaii does NOT recquire smog inspections! we are allowed to not have any cats. whoohooo!




Well I was getting around 38-40 mpg before the S/C, but now I am getting around 29-31 mpg. It IS a sacrafice, but I believe the trade off is worth it.
Removal of all of your cats is definitely not legal in hawaii. Yes, we have no smog inspect., but they can check to see if you are running catless.

[changchewsoon]

Decat, 2.2 inch, custom box, dual exhaust dual titanium tip.

http://lh6.ggpht.com/_RQcAxTVtNRs/SRkNFFhQqXI/AAAAAAAAAu0/XkYqO9yFPBQ/s912/vios-turbo-11.jpg

http://lh5.ggpht.com/_RQcAxTVtNRs/Sc8uhbssTLI/AAAAAAAAA1A/UlvKmOjtalU/s912/Toyota-Vios-Turbo-Titanium-Exhaust.jpg

[alch3miss]

http://i15.photobucket.com/albums/a374/alch3miss/IMG_1720.jpg


http://www.youtube.com/watch?v=yTuYUDUCj7w

[changchewsoon]

http://i15.photobucket.com/albums/a374/alch3miss/IMG_1720.jpg


http://www.youtube.com/watch?v=yTuYUDUCj7w

that is a nice and sexy exhaust :)

[cleong]

Whoring my exhaust note in a tunnel:

http://www.youtube.com/watch?v=z5ImnarEIFw

[The Spectacle]

Custom work done locally here in St Pete. Stainless steel, mandrel bent, 2.0 inch piping. Magnaflow muffler.

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02904.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02903.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02902.jpg

http://i89.photobucket.com/albums/k231/lhtperformance/DSC02901.jpg

When I get a chance I'll take some better pics and a vid clip or two.

- The Spectacle

[revoturbo]

NIce works.. :w00t:

[AznGouki]

This may be the most retarded question but does the 5 door and the 3 door have the same exhaust? Like if I bought a exhaust labeled 3 door, will it fit my 5? Some times I feel so dumb haha

[Mouse]

2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.

[PETERPOOP]

2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.

Wrong. Probably make it worst. 2" is perfect for N/A. If he went with bigger piping, he'd be LOSING power in the low to mid range.

[Mouse]

so why not go with 1.5"...2.25" is the perfect size for NA applications. Anything bigger is for more peak horse power.

[Mouse]

Read.....
http://www.miata.net/garage/KnowYourCar/S4_Back.html

[The Spectacle]

2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.

You honestly think .25 inch is going to make a difference on a 1.5L 100hp car????

Well, it will be louder and slower. So maybe just not the difference you're looking for. I certainly wasn't.

[Mouse]

Well, if the stock exhaust diameter is 1.75" then the extra .5" would make a difference.

Did you see a difference in going from 1.75" to 2.00"?
That's only a .25" difference.

[jdinrc]

There is a significant difference in only 0.25".

2" pipe is 3.14in/sq area
2.25" pipe is 3.97in/sq area
That's a 26.4% increase in flow capacity going from 2" to 2.25". Sounds like 26% would make some sort of difference to me.

[thebarber]

megan axleback

http://i22.photobucket.com/albums/b339/dabarber/yaris/lowering/yarisspring2009004.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/lowering/yarisspring2009002.jpg

[treppen]

Axel back

[monchito18]

Good Results with Automatic Transmission? I have an Automatic Sedan and want to know.

[Tamago]

Anyways, the power from a NA yaris will lose torque with 2.25" piping. I'm leaving it at that.

please prove this blanket statement with dyno graphs of a stock exhaust yaris vs a 2.25" exhaust, done on the same day, same air temperature, same humidity, same yaris.

[Jerkratt]

finally got a chance to put the CEL box that garm sells into the mid pipe. it works, I've scanned with scan gauge and cleared prior (cel temp. off) then installed. has been fine ever since

[thebarber]

megan axleback w/ muffler painted flat black
http://i22.photobucket.com/albums/b339/dabarber/yaris/ealge%20rims/yariseaglerims009.jpg

[marcus]

mine..

vids in here..: http://www.yarisworld.com/forums/showthread.php?t=17286&highlight=magnaflow

[nisyota]

Are you not listening to me. You will lose torque going with 2.25". You don't need it that big. But whatever you want.


i have to agree with peterpoop... im running 2.25" pipes on my Nissan Titan (5.6L 321hp with 353 ft lbs/tq running 13.88 in 1/4 mile)... Originally the pipes are only 1.98". If i go up to 2.5" than ill be losing enough low end torque that i cannot get a good 60' time. BUt, the high end will be better since the flow will be faster... But for low to mid range, i think 2.25" is a little high...

test them at a Drag Race Track. Doesn't matter the driver, well kinda does. But take 2 yaris'. Same Mods, except the only difference is that one is 2" piping and the other is 2.25" pipes. You will see that the 2" will have a better 60' and all the way up to the 1/8 mile... BUt after that the 2.25" will take over because there is more air flow...

But, this isn't really the thread to discuss this. I just had to put this out there since there is also confusion with my truck with other people thinking bigger is better, which is not... :D

Oh, how come i see more pics than videos of the exhausts? I want more videos and more burnouts. LOL

[N3misiS]

I have Posted my Pics here to and I found for everyday use 2" is better to zip along with tafic etc. I have also tested this theory already, and I speak my Yari is getting Dyno Tuned branches\Headers being Build for it, what I will do is try and post the Dyno Charts for the diffrent Pipes and header combo's, I am in SA though but it could be used as a guide for everyone else out there, btw it is the T1 and its being done by Viper Exhaust, I Cant wait....

[nisyota]

i think the only thing the dyno charts will do is show different points of shifting or is it the location of the peak power for the car...

2." for more of a down low hp and tq and 2.5" for up top... itll might show the same or close to numbers, but the power band will be different... anyways, don't forget to show video and pics of the dyno!! :D

[N3misiS]

I wil do my best bro, One thing to remember, it is a 1KRFE, at the moment they have finished the branch and silencer System! We are just waiting for the knuckle's (connectors) originally I was getting 58Kw out of the original custom exhaust... I got the results today for that, so as soon as the knuckles come in and we have tested this I will let you guys know... The guys at Viper is really out doing themselfes, and I will be the first ever Yari T1 with developed Exhaust\Header and not those Crappy BS you get for a 1\4 of the price.... WIll keep you guys Up to date!!

[N3misiS]

More news Guys, I went to check on the new System, and Helll!!!! its cooking!
I am getting my car back this week! with the Dyno, and pics.... before and after!!!

No one here has really done stuff to the lil 3Cyl 1KR-FE....

More Updates this week!

[nisyota]

LOL, can't wait to see the final production...

[PETERPOOP]

re posting my exhaust video (redid it in HD)

Click "HD" below the video player.

http://www.youtube.com/watch?v=dLzpiqq_MEg

[lilredrocket]

Here's mine I got it done last week

[eii]

If you didnt see any of my post in my other threads on my exhaust sound clip, here you go..


Made a quick video of how my performance setup sounds like. The engine mods are:

TRD Axle-Back Exhaust, Simota Carbon Charger Intake, NST Lite Crank Pulley Red, 1ZZ-FE Throttle Body, and AMK Racing Header.

Direct Link: http://www.inimi.org/downloads/eiiexhaust.avi
YouTube Link: http://www.youtube.com/watch?v=rgQiuWupPgw

[thepoche]

Here's a clip of mine. A Nitto axle back from Micro Image. Thank you Garm :biggrin:

http://www.youtube.com/watch?v=5j5VAEPYb5k

[y75]

Steel and carbon italian manifactured muffler Asso racing:w00t:

[gatoman]

Well here are the 2 exhausts I have used so far, first the HKS Hi-Power, friggin noisy but a good tone... Pics with both the regular bumper and the RS. Exhaust currently owned by ChinoCharles, a collector's item of YW lore :biggrin:

videos:
http://www.youtube.com/watch?v=K1KCFDCffuA
http://www.youtube.com/watch?v=w-PMaIB0PdU

dude.......... you cars are so nice.... i can safetly say they look batter then a vw gti IMO... and its like 10 k cheaper =D... when i get a yaris i would like an exhaust like that:biggrin::coolpics:

[mikenacarato]

TRD xD exhaust with the tip piping cut down 2.5" so it doesnt stick out so far.

http://i18.photobucket.com/albums/b110/mikenacarato/Yaris/Exhaust/IMG_0141.jpg
http://i18.photobucket.com/albums/b110/mikenacarato/Yaris/Exhaust/IMG_0142.jpg
http://i18.photobucket.com/albums/b110/mikenacarato/Yaris/Exhaust/IMG_0143.jpg

[posaunemeister]

Here are a couple of pics of my custom axleback. I hacked the muffler off from the stock axleback exhaust piping, drove it to the shop, and had a tech weld everything (2 1/4" piping and a 2 1/4" Dynomax Super Turbo muffler) together. This morning, I spray painted the entire axleback with three coats of high temp, high gloss black paint (w/ Ceramic) to conceal it and protect it from the elements.

It sounds great and flows well! I did not lose any noticeable low end at all. In fact, it feels as though I've gained some. I have to take the interstate tonight -- I can't wait. :thumbup:

The total exhaust cost me $150, but it was definitely worth it, as I plan on having this car for many years to come. I mean, I almost spent that much on my NST 10% underdrive pulley (which I will install tomorrow night, btw).

Anyway, let me know what you guys and gals think. I apologize for the low quality cellphone pics.

[zer0sk8ordie]

Greddy Ti-C:
http://img.photobucket.com/albums/v621/Whitehot/Yaris/tiC1.jpg

http://img.photobucket.com/albums/v621/Whitehot/Yaris/tiC2.jpg

is this the 09 S? the exhaust clears the lip ok?

[kid chino]

is this the 09 S? the exhaust clears the lip ok?

I have an 09 rs same as the us spec s with a greddy ti-c fitment is perfect the tip sits a bit underneath the rear lip but looks and sounds great

[thebarber]

megan axleback w/ custom 2.25" crush bent midpipe from resonator to axle flange

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/100_6834.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/100_6835.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/th_100_6837.jpg (http://s22.photobucket.com/albums/b339/dabarber/yaris/midpipe/?action=view&current=100_6837.flv)

[E.R.G]

Is it posible for example to use a DC header and then a magnaflow exhaust, without cats and/or resonator??

[RacerFreakXXX]

is a 2.5" exhaust too big for n/a?

[Kaotic Lazagna]

is a 2.5" exhaust too big for n/a?

Excessively. Even my 2.25" is too big, imo.

[thebarber]

my 2" from the resonator back is perfect.

[RacerFreakXXX]

how about for turbo? is anyone going 2.5 or 3"?

[06silveryaris]

how about for turbo? is anyone going 2.5 or 3"?

depends on the amount of boost your planning on running if a lower boost set up then 2.25 or 2.50 so you can maintane your torque. If you looking for ultimate power and monster boost 30psi ect I would go for 3. Thats just me and from what I have seen at the track here

[taracor]

Do those wide tips like the Nitto and the Greddy fit under the stock lip alright? If I recall, there was a member that ended up with part of his bumper melted.

[Sabretooth]

Here's mine, 2 inch resignator back, center tip, loved the tone of my megan exhaust I had then recycle it...

Total cost, $270

$140 used exhaust purchased 2 yrs ago
$100 mandrel bent 2 inch piping
$30 twin exhaust tip via ebay.


http://www.youtube.com/watch?v=kU6Dfak_PkE&feature=youtube_gdata

[Kaotic Lazagna]

Here's mine, 2 inch resignator back, center tip, loved the tone of my megan exhaust I had then recycle it...

Total cost, $270

$140 used exhaust purchased 2 yrs ago
$100 mandrel bent 2 inch piping
$30 twin exhaust tip via ebay.


http://www.youtube.com/watch?v=kU6Dfak_PkE&feature=youtube_gdata

Nice, another center-exit!

[cali yaris]

how about for turbo? is anyone going 2.5 or 3"?

Mine is 2.5". Can't imagine needing 3" on the 1NZ

[Herbicidal]

OK, adding mine to the mix! Custom center exit with rectangular chrome tips. Used an Imco muffler and an Imco resonator. Both cylindrical in shape and they tuck up nice underneath with nothing hanging down. Major props go to All Muffler Service (Mark and Bill) in Rocklin, CA. These guys are a couple of gear heads and they both had fun working on my car. Highly recommend this shop if you want a custom exhaust. :thumbsup:

All stock, prior to surgery:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2208

Out with the old:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2207

Old stuff: muffler, resonator and the rear jack point:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2206

New stuff! Obviously still on the lift. Just painted the resonator, pipe and some of the pan underneath the spare tire:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2205

A down low view:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2204

Up high, looking down. Just enough tip showing in my opinion:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2203

Everything tucked up nice and tight and blacked out:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2202

Pic from a little further away:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2201

And that's it! Hope you like. :biggrin:

[Kioshi]

we've got two in NorCal, can't wait to see it at the upcoming meet!

[Herbicidal]

Thanks! I'll be there. :thumbsup:

[XYaris]

Installed a Tanabe Concept G yesterday. Its really nice to actually hear my exhaust. Im sure the honda guys in the 'hood like it but Ive definitely pigeonholed myself with this mod (um ricer maybe?). Im cool with that. I think it sounds great.

[Monstro]

Hey everyone this is my first post so bear with me, I've been lurking for a couple months and I just installed an afe intake and the trd sway bar. What does everyone think of the usdm trd exhaust? I can get it for around 200 new so I wanted to know if it's good quality and sound. Thanks.

[N3misiS]

:evil:

[fnkngrv]

OK, adding mine to the mix! Custom center exit with rectangular chrome tips. Used an Imco muffler and an Imco resonator. Both cylindrical in shape and they tuck up nice underneath with nothing hanging down. Major props go to All Muffler Service (Mark and Bill) in Rocklin, CA. These guys are a couple of gear heads and they both had fun working on my car. Highly recommend this shop if you want a custom exhaust. :thumbsup:


And that's it! Hope you like. :biggrin:


Looks really nice and it appears a lot of thought went into the design. Would be great to hear it? Also, how about those tips?

[alch3miss]

that is a nice and sexy exhaust :)

Thankks got it customized for the sedan- http://www.youtube.com/watch?v=yTuYUDUCj7w is the vid for it

[Herbicidal]

Looks really nice and it appears a lot of thought went into the design. Would be great to hear it? Also, how about those tips?Thanks for the compliment! Hmmm. I haven't tried to do a video with sound, maybe I'll try to figure that out. The tips were custom done by that shop, just waiting for someone to buy them. As it turns out that would be me! :biggrin:

[47_MasoN_47]

HK exhaust on my 2009 Sedan

Video - http://www.youtube.com/watch?v=hKkwIF19TYo

http://lh6.ggpht.com/_NXYXl9tPid4/TIemVqQsIgI/AAAAAAAAAB0/KB3DiHur4-E/s144/100_8611.JPG
http://lh3.ggpht.com/_NXYXl9tPid4/TIemVwowZMI/AAAAAAAAAB4/AmPkt6mX8fQ/s144/100_8612.JPG
http://lh6.ggpht.com/_NXYXl9tPid4/TIemWSfRc-I/AAAAAAAAAB8/AKSCNZRPBz0/s144/100_8613.JPG

EDIT: Not sure why the pics are so small...stupid Picasa I guess.

[.Kevin.]

Anyone know about any cheap like 200-300 ones I would like to purchase one, then itll prob be like 100 to get it installed.

thanks

[Yaris4ever]

Love the way some of those look :headbang:

[OTB]

Can one of these be found in USA? I definetely want more audible volume, not enough to piss off the town, just enough to hear rpm's better. Also light weight, not towards the back towards the front towards the back like the stock unit.

Thunder seems to fit this description, but I can't find one for sale.

rock on

[Thalmes]

Im just wondering what measurement of muffler would fit a stock 1.3L Yaris ? HAtchback 2009 version =)

[kirk0505]

JDM Blitz NUR Spec S Axle Back Exhaust.















file://localhost/var/mobile/Media/DCIM/100APPLE/IMG_0206.MOV

[cali yaris]

Anyone know about any cheap like 200-300 ones I would like to purchase one, then itll prob be like 100 to get it installed.

You should be able to bolt on an exhaust yourself.

Sedan axle-backs:

HK1:
http://shop.microimageonline.com/HK-SEDAN-axle-back-exhaust-HK1-sedan.htm

Nitto:
http://shop.microimageonline.com/Nitto-SEDAN-axle-back-exhaust-Nitto-SE-1.htm

[mario98c]

My yaris sedan 09 with Trd Exhaust with cat/res delete.
http://www.youtube.com/watch?v=oR6sgzXNkuM

[matthewai]

got this hk1 from jumpman the noise issue is okay with me for now im gonna keep it on for a while ill get used to it. hearing music is sometimes an issue but its okay it sounds great not to ricey at least i dont think so

ill have a vid soon i guess better pics to ahha

[matthewai]

this is the car now hk1 exhaust afe intake :smoking:

http://www.youtube.com/watch?v=Ge-H-l1Geq8

http://www.youtube.com/watch?v=qQe76Qu-68U

[bwd1973]

Cali,

Was looking at your Nitto cat back. That'll fit my 2011 3dr hatch right? Any help is greatly appreciated. Thanks bro.

[SilToYaris]

I love the sound of Blitz supercharger, Thats is on my buy list for sure...

[PopsCar]

Just installed it today. Nice deep Sound. Keeping the Silencer in for now. I felt the power increase right away.

[matthewai]

hey pops do you still have your stock axle back? if so are you willing to part with it? im on li only reason why im asking ive been looking for one

do you have any video of your set up now with the silencer ?

[chewychewbacca]

Hey guys, finally got around to getting some video of my Tanabe Medallion Touring Exhaust. It's everything I expected, sounds great, is not too loud, and everyone loves it.

http://www.youtube.com/watch?v=ROeri4U66ic

http://www.youtube.com/watch?v=N-kKwwjjmC8

I have the stock exhaust if anyone needs it.

[2mtech]

I'm down with the Tanabe Medalion Touring axle back too! Sounds SWEEEEEET (sorry, no video). It's got a nice, deep bass tone, definitely not too loud, and the immediate power increase was phenomenal! Took 10 minutes to install it...just jacked up the right rear corner and pulled the wheel. Easy peasy!

http://farm7.static.flickr.com/6089/6156903326_13539872b1_z.jpg (http://www.flickr.com/photos/67502513@N04/6156903326/)

http://farm7.static.flickr.com/6167/6156360623_071989b527_z.jpg (http://www.flickr.com/photos/67502513@N04/6156360623/)

[SilToYaris]

I heared it already, my friend has one yes very nice sound, I would had one too if i had the money! ;)

[Yarisaur]

Just installed it today. Nice deep Sound. Keeping the Silencer in for now. I felt the power increase right away.

What exhaust is this?? Its not the HK1, because I have an HK1 and it does not have a silencer..

[Dadams]

I want to do an exhaust mod to my yaris in the future but Im still pretty new to the tuning scene I want to do a dual exhaust system with double exhaust tips on each. right now I only have a single exhaust I was wondering if its possible at all to split a stock single into a dual.

[ilikerice]

for the duel exhaust, I'd like to make a suggestion. We did this with my roomies crx. We used a camero muffler like this one:

http://www.ebay.com/itm/WALKER-EXHAUST-18375-Exhaust-Muffler-/390333383259?fits=Model:Camaro&hash=item5ae1aec25b&item=390333383259&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

and we had it custom made to the stock axle back and had them weld extra hangers and you can put any type of duel tip on each end if you wanted.

like this:

[thebarber]

for the duel exhaust, I'd like to make a suggestion. We did this with my roomies crx. We used a camero muffler like this one:

http://www.ebay.com/itm/WALKER-EXHAUST-18375-Exhaust-Muffler-/390333383259?fits=Model:Camaro&hash=item5ae1aec25b&item=390333383259&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

and we had it custom made to the stock axle back and had them weld extra hangers and you can put any type of duel tip on each end if you wanted.

like this:

see where the exhaust shrinks down to 1.75" after the resonator? if you're going custom, do yourself a favour and replace the exhaust back to there....you won't be disappointed (or buy my midpipe piece i had built from my part-out thread)

[ilikerice]

makes a very valid point. I keep forgetting that for some reason.. I havent done that yet because I need to keep the Cat on for my class.. ONE day I will drop it off at a exhaust shop and have them weld a pipe in from Cat to axle.

[malibuguy]

here's mine

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/217313_10150262666185278_524470277_9154798_2681226 _n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/217187_10150262666075278_524470277_9154795_7387698 _n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/320271_10150479218685278_524470277_11057174_637752 072_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/301537_10150479218855278_524470277_11057175_209794 4647_n.jpg

Video;
http://www.youtube.com/watch?v=QPNziKtxzvU

i don't have a picture of it online, but i've since added a branch style resonator to it to pretty much eliminate my interior drone between 1600-2300rpm

[enviri]

Fujitsubo Wagolis for Vitz RS :) had it for more than a year and loving every minute! Cleanest welds I've ever seen.

http://i50.photobucket.com/albums/f332/xienji/fo%20show/IMG_0381.jpg
http://i50.photobucket.com/albums/f332/xienji/0c6953e7.jpg

[Dadams]

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

[Herbicidal]

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethinReally? They cut mine off from the cat back and installed a new resonator and muffler. I now have a center exhaust. A competent muffler shop should be able to route it up to your roof if you want. :biggrin:

Stock:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2208

Surgery:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2207

Out with the old:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2206

In with the new:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2205

All done:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2201

[WeeYari]

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

This is what you want http://www.yarisworld.com/forums/showpost.php?p=434884&postcount=1

There is another one similar by a member, in PR I think, but I can't find it. It is not difficult to fabricate. All these guys are really doing is branching off of the existing tailpipe with a second one. Run the new one over to the left and weld on some tips.

[thebarber]

makes a very valid point. I keep forgetting that for some reason.. I havent done that yet because I need to keep the Cat on for my class.. ONE day I will drop it off at a exhaust shop and have them weld a pipe in from Cat to axle.

keep the stock cat and res, theyre 2" thru

just cut off the rear which is 1.75" and get something fatter

or this: (see red line for exhaust path)

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/exhaust.jpg

[ilikerice]

keep the stock cat and res, theyre 2" thru

just cut off the rear which is 1.75" and get something fatter

or this: (see red line for exhaust path)

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/exhaust.jpg

thanks.. i was gonna drop the res. but if it is 2" anyways, why not keep it..

and according to your diagram.. you want me to put a side exhaust? :wink:

Dadams Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

Id shop around.. Obviously that shop doesn't like custom work nor wants to make a profit.. Somebody will man up and do it. Find another muffler shop

[Dadams]

Yeah this is excactly what I want!! :eyebulge:

http://www.yarisworld.com/forums/showpost.php?p=434884&postcount=1

And yeah I think Im just gunna have to go deeper into houston I figured it couldnt be that hard to do. anybody know how much a setup like this would cost?

[Dadams]

see where the exhaust shrinks down to 1.75" after the resonator? if you're going custom, do yourself a favour and replace the exhaust back to there....you won't be disappointed (or buy my midpipe piece i had built from my part-out thread)

How much longer will you be holding onto that mid piece? and will I be able to have someone brach it off into two like everyone else is saying? cuase thats one hell of a deal :biggrin:

[xixarchangelxix]

Here's how mine looks:
https://www.digitalhive.org/digiimg/images/21900639953823246544_thumb.png (https://www.digitalhive.org/digiimg/viewer.php?file=21900639953823246544.jpg)
https://www.digitalhive.org/digiimg/images/66592700335157792520_thumb.png (https://www.digitalhive.org/digiimg/viewer.php?file=66592700335157792520.jpg)
https://www.digitalhive.org/digiimg/images/08209001810433589762_thumb.png (https://www.digitalhive.org/digiimg/viewer.php?file=08209001810433589762.jpg)
https://www.digitalhive.org/digiimg/images/98518514734484168657_thumb.png (https://www.digitalhive.org/digiimg/viewer.php?file=98518514734484168657.jpg)

[ilikerice]

I need to find my magnifying glass to see those pictures :eyebulge:

[xixarchangelxix]

Or you could try clicking on them...

[malibuguy]

well considering the stock exhaust is well matched in size & is mandrel-bent 409ss tubing...anything a typical muffler shop is going to do to it & put crap on it. aluminized steel components that will rot out, cheesy hangers that aren't matched to the factory isolator...or better still, welded on truck style hangers to the chassis that will rot that out too. then its crush-bent so it doesn't do anything for you in terms of laminar flow

[ilikerice]

AAHAA! thats better :w00t:

[yariSB86]

what are the pros/cons of riding around with no muffler? just for kicks until i decide on which exhaust setup to purchase.

[cali yaris]

^ sound, mostly. A couple of members have made axle-back straight pipes from the flange out to get some aggressive sound. I really don't think it will hurt your car.

[yariSB86]

cool. it is very loud. thanks man.

[malibuguy]

A muffler delete sounds pretty cool with the stock midpipe. I ran around like that for about a month. Then i swappped my full exhaust back on...more power with less noise!

[tooter]

well considering the stock exhaust is well matched in size & is mandrel-bent 409ss tubing...anything a typical muffler shop is going to do to it & put crap on it. aluminized steel components that will rot out, cheesy hangers that aren't matched to the factory isolator...or better still, welded on truck style hangers to the chassis that will rot that out too. then its crush-bent so it doesn't do anything for you in terms of laminar flow

There is an alternative to the muffler shop, although I've seen some really nice work done at some...

http://i17.photobucket.com/albums/b90/compost_bin/car/IMG_6010.jpg

...Garm's MI exhaust has mandrel bent tubing and oem matching hangers which perfectly align with the stock isolators. :thumbsup:

[xnamerxx]

My custom side pipe :biggrin:

http://i52.photobucket.com/albums/g21/xnamerxx/2012-08-23_20-32-50_967.jpg

http://www.youtube.com/watch?v=KP2cX0aB8o4&feature=g-upl

[4/20 NEVER FORGET]

Copy-paste of my reply in the OBX exhaust thread:


I got the exhaust installed today. Like I said previously I had the factory and OBX exhausts cut to meet just after the factory resonator.

I took a picture of the inside of the resonator so you all could see that is straight-through in design. I was going to have it changed out if it wasn't, but looking at it there didn't seem a reason to have it replaced.

Some work was required to make the muffler fit into the space available under the car, we had to take a sledge hammer and hammer the spare tire well in a bit as well as bend the toe-hook out a half-inch so that the muffler could be fitted nice and tight under the car. With the factory hangers it wanted to hang pretty low, we used the OBX back mount that holds onto the pipe next to the muffler and the exhaust shop welded a hanger to the top of the muffler, just out of sight.

The muffler is quite loud compared to the Megan axle-back I had before. I'm going to give it a week before I make a final decision but I might have it cut off and changed out with a Magnaflow or some other exhaust. I do really like the way the muffler looks though, the tips look nice tucked up right under the bumper.

Here's a video, I should have revved the car up a bit more but it's what I have for now. I'll take another one and post it when I get a chance.

http://www.youtube.com/watch?v=niZYgO0vvrU&feature=plcp

And to respond to TPA5, while loud, there is no buzz or rasp that you sometimes get. I've had a lot of Honda cars so I know what you mean about buzzy or raspy. If this car was a bit faster I could justify the sound it makes, but for now I would like it a bit quieter.

[4/20 NEVER FORGET]

oops, forgot it did not attach images

[mario98c]

Muffler Delete with the second catalytic converter removed, 2 inch midpipe and magnaflow glasspack resonator.
http://www.youtube.com/watch?v=rMGhzhs7lbE

[odg495]

Just came back from the exhaust shop after fitting some new tailpipes to my Yaris. I kept the original muffler and had them fabricate a split pipe from there, with a twin 2" tip fitted to each side. Its something I've wanted to do ever since I bought the car, and now I'm happy with the result. Its more subtle than some of the others on this site, but being middle aged now it suits me just fine.

[tooter]

Nice...:smile:

Looks like a BMW M5 exhaust. :thumbsup:

[odg495]

Nice...:smile:

Looks like a BMW M5 exhaust. :thumbsup:

I was thinking more M3, but hey, I'm not going to argue! :laugh:

[larryn2o]

this one is a 2 inch pipe with a 2 inchcherry bomb turbo muffler, passes for a stock muffler. low tone unloaded . a good bit louder under load.


cost $24 at autozone and $44.00 to get the pipe bent and welded.

I know it's not stainless or Unobtainium , but I've already started my next axle back , will post it in a few days.

http://www.youtube.com/watch?v=fPtaWvaIkU0&list=UL

[DeathBeard]

Anyone using the Apexi Bomber exhaust??

[yariSB86]

DC Sports axle back (https://www.facebook.com/photo.php?v=462195327186822&set=vb.100001890758715&type=3)

Also have K&N Typhoon intake and DC Sports header

[tooter]

Sounds like beautiful music... :smile:

[yariSB86]

Thanks man. :biggrin:

I'm waiting on a couple prospects for my mid pipe replacement. should sound even most beastly when its all done.

[Turbotoro]

Hey guys, figured I'd post here because I'm having a super hard time finding an axle back for my 05 echo (in Canada) anyone want to point in the right direction or sell me their exhaust? Lol thanks any info would be appreciated

[mrtobs1988]

Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D

Hey is that the only midpipe you can find. And why is it so expensive? Is there anything cheaper that you know of?

[brutal910]

Hey fellas, I could use some help here.I have a 2007 yaris hatchback. 1.5 liter 5 speed. DC header, greedy full exhaust , no cat. And some little gadget box with wire that is suppose to trick ecu that it does have a cat engine light on. Code his for 0/2 sensor upstream. If I install a new 0/2 sensor my engine light should turn off right? I only have 15 days to fix this problem. And I'm on my eighth day.otherwise I will have to pay for another inspection. Please help. I didn't see another 0/2 sensor under there unless I missed it. Mechanic suggested I change both. 318.00 bucks for parts. :-(

[Vitz_Q8]

This is my very first post and hopefully not the last. I've been visiting yarisworld for a while occasionally until I finally bought my Yaris couple of months ago. I've been always a big V8 sedan guy but when I rented a Yaris in a road trip last I fell in love with it instantly, I don't know how to explain my feeling but wow, Huge difference from my Crown Vic and Aus Ford Falcon.

Anyway let's get to the topic :smile:. After a very long wait I finally got Tanabe Concept G Exhaust for my Yaris. Thanks to redyaris's post I managed to install it by myself. It was a relatively easy task but took me about 6 hours :biggrin:because the right wheel and one of the mufflers's spring bolts were stuck even with WD-40 and some hammering.

here are the pictures:
http://s29.postimg.org/mnmc1dv6f/20140418_094228.jpg

http://s29.postimg.org/bql0cm8ev/20140418_094933.jpg

http://s29.postimg.org/iansiymfr/20140418_095209.jpg

http://s29.postimg.org/otgmvvymv/20140418_095236.jpg

http://s29.postimg.org/m3ghq6gpj/20140418_095339.jpg

http://s29.postimg.org/7zbfqauqf/20140422_085624.jpg

http://s29.postimg.org/e85ybd72v/20140422_111945.jpg

http://s29.postimg.org/3mm2zd0rb/20140422_113103.jpg

http://s29.postimg.org/xc3v5g9av/20140422_114031.jpg

http://s29.postimg.org/8evwasvfb/20140422_114142.jpg

http://s29.postimg.org/uluj89clz/20140422_120155.jpg

http://s29.postimg.org/55m2i2wpj/20140422_145536.jpg

http://s29.postimg.org/il937j57b/20140422_145554.jpg


I really love it. At first I thought it's a little bit loud and annoying especially on long drives. there was a moment when I regretted installing it and thought about reinstalling the OEM exhaust but now I Think I got used to it by now and I absolutely love it. I will upload a video as soon as it's uploaded on Youtube
http://youtu.be/6OUqDz-pF2c

[YarisPR]

Current setup
Custom long tube header
2.5" exhaust w/ cut-out
http://i273.photobucket.com/albums/jj238/angelo0011/1C3077EF-7CA5-4987-B76C-B05BC1D5613D.jpg (http://s273.photobucket.com/user/angelo0011/media/1C3077EF-7CA5-4987-B76C-B05BC1D5613D.jpg.html)

[j-san]

A question for you exhaust gurus:

A search of the forum turns up conflicting reports of a freer-flowing aftermarket exhaust system improving/hurting MPG. Some said it improves MPG and power, others have said it hurts MPG, but improves power. Either way, it seems a better exhaust will improve power and possibly affect MPG.

I drive with a fairly light foot and mostly on the highway and average 43MPG most days. My Yaris is stock, but I am open to doing an aftermarket exhaust, provided it doesn't sound like bad rice and seriously hurt MPG. I wouldn't mind the few extra HP for a little help in the passing lane. If I go aftermarket, I plan to leave the intake stock and drop in a K&N filter. Maybe a header is fine, but I plan to leave the cats and resonator intact and possibly add an additional resonator after the stock one. There is a local custom exhaust shop that can do the work and I would ask them to follow the stock piping, but go up to a 2" pipe vs the stock 1.75" pipe (I understand the cats and resonator use a 2" pipe) and route it to the factory flange at the rear axle. From there, I'll probably bolt on a Tanabe Medalion or Nitto (plan to buy from Micro Image) as those two seem to be the quietest mufflers. How does that sound for an exhaust set-up?

I am not expecting oh-my-god gains in HP or anything, but hope to have a little of both worlds: improved HP while being able to retain (or improve) MPG.

[monchito18]

Current setup
Custom long tube header
2.5" exhaust w/ cut-out
http://i273.photobucket.com/albums/jj238/angelo0011/1C3077EF-7CA5-4987-B76C-B05BC1D5613D.jpg (http://s273.photobucket.com/user/angelo0011/media/1C3077EF-7CA5-4987-B76C-B05BC1D5613D.jpg.html)

que porqueria Angelo jajajajajajaja
:bellyroll:

[malibuguy]

A question for you exhaust gurus:

A search of the forum turns up conflicting reports of a freer-flowing aftermarket exhaust system improving/hurting MPG. Some said it improves MPG and power, others have said it hurts MPG, but improves power. Either way, it seems a better exhaust will improve power and possibly affect MPG.

I drive with a fairly light foot and mostly on the highway and average 43MPG most days. My Yaris is stock, but I am open to doing an aftermarket exhaust, provided it doesn't sound like bad rice and seriously hurt MPG. I wouldn't mind the few extra HP for a little help in the passing lane. If I go aftermarket, I plan to leave the intake stock and drop in a K&N filter. Maybe a header is fine, but I plan to leave the cats and resonator intact and possibly add an additional resonator after the stock one. There is a local custom exhaust shop that can do the work and I would ask them to follow the stock piping, but go up to a 2" pipe vs the stock 1.75" pipe (I understand the cats and resonator use a 2" pipe) and route it to the factory flange at the rear axle. From there, I'll probably bolt on a Tanabe Medalion or Nitto (plan to buy from Micro Image) as those two seem to be the quietest mufflers. How does that sound for an exhaust set-up?

I am not expecting oh-my-god gains in HP or anything, but hope to have a little of both worlds: improved HP while being able to retain (or improve) MPG.

To be honest. Keep the stock exhaust for mpg. I usually have run about 3mpg less with my exhausts. Most of the fact that I love to listen to my exhaust. Plus the stock exhaust is better matched for low rpm performance.

A typical muffler shop will only crush-bend tubing. So their 2" tubing is typically smaller in the bends then your stock midpipe. So the only thing your getting is no improvement in exhaust flow and lower quality tubing that will rust out eventually.

I suggest a rear section exhaust for some power and sound and not throwing away all your mpg.

These motors really love a full exhaust so real gains in power can be realized

[j-san]

To be honest. Keep the stock exhaust for mpg. I usually have run about 3mpg less with my exhausts. Most of the fact that I love to listen to my exhaust. Plus the stock exhaust is better matched for low rpm performance.

A typical muffler shop will only crush-bend tubing. So their 2" tubing is typically smaller in the bends then your stock midpipe. So the only thing your getting is no improvement in exhaust flow and lower quality tubing that will rust out eventually.

I suggest a rear section exhaust for some power and sound and not throwing away all your mpg.

These motors really love a full exhaust so real gains in power can be realized

Thanks much for the advice. I may just look into getting a axle-back system like the Tanabe Medalion and leave the rest stock. Maybe have the shop weld in another resonator if I find the aftermarket muffler too noisy.

[dekraberd]

:iono:

[salmanghiyas]

what is the basic function of these cats ?
please suggest what option from below should i go, for the maximum HP gains .. regardless of fuel economy ..

1: remove both cats and resonator and put a straight down pipe of 2" or 2.25" ( please suggest which is better 2" or 2.25" ) till the end ...

2: keep the 1st cat and remove the second cat and the resonator and put a straight down pipe till the end ...


3: keep both cats and just remove the resonator and put a straight down pipe till the end ...

4: keep both cats and resonator just put a straight down pipe after the resonator till the end ...

5: remove both cats just keep the resonator and put a straight down pipe till the end ...

[mario98c]

Remove both cats with 2" exhaust and magnaflow freeflow muffler

[salmanghiyas]

Remove both cats with 2" exhaust and magnaflow freeflow muffler

u mean from the header neck .. i put a 2" pipe then in the middle put a resonator .. and at the end use the magnaflow muffler ?

[mario98c]

u mean from the header neck .. i put a 2" pipe then in the middle put a resonator .. and at the end use the magnaflow muffler ?
That's correct.

[salmanghiyas]

That's correct.

Awrite :)

and what roughly expected HP gains i would get ...

[mario98c]

I can't tell you exact dyno numbers because I never visited a dyno after installing the exhaust but you will definitely feel the difference in acceleration. You will not regret doing it.

[salmanghiyas]

I can't tell you exact dyno numbers because I never visited a dyno after installing the exhaust but you will definitely feel the difference in acceleration. You will not regret doing it.

ohkhay ...

if i use 2 resonators in the middle .. just for lowering exhaust sound .. would it effect the performance ?

[mario98c]

ohkhay ...

if i use 2 resonators in the middle .. just for lowering exhaust sound .. would it effect the performance ?
I don't think so but with one resonator the car is quiet enough that it won't bother you cruising at normal speed.

[mario98c]

Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk

[salmanghiyas]

Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk

Very nice :smile:

[salmanghiyas]

Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk

if i'm not mistaken ... the point you are making here is ...

the original OEM resonator in the catback which basically is the third one in line ... has 2" in and 2" out pipe width ?

[salmanghiyas]

Yellowww ...

[salmanghiyas]

im getting too confused now .. :S

some say go with max 2" pipes some say nah its ok even if u take 2.5" pipes .. some say keep the 1st cat .. same say remove both cats and have only one resonator in between ... :S

im surfing over the forums and internet from the last few days now ... but honestly speaking the more and more im reading stuff the more im getting confused ... :S

i did experimented one thing ... i put a 1.7" pipe ( 1.7" measurement from inside ) from the neck of the headers, removed both cats and resonator till the rear bumper and installed a topspeed muffler at the end ... the inlet of the muffler was 2.5"

[Freestylin]

^ It depends what your long term hp goals are to determine which pipe diameter to go with. Here is a good read:

http://www.magnaflow.com/07techtips/faq/question10.asp

[malibuguy]

finally got around to getting mine back on the dyno with the current exhaust...no real difference over the old set up peak vs. peak...but after peak power was up like 7whp...

http://www.youtube.com/watch?v=yRBfjMLSNDU

[clint]

Removed stock muffler and replaced with shown baffle and tip. I think it sounds pretty good!!

[ryanww]

I have 1.5 Yaris m/t. I'm going to install unichip q+, but I'm waiting for the exhaust set up. I've done porting polish, open filter, megan header, lightweight crank pulley. The megan header outlet is 2". What's the best pipe size and exhaust set up? Is 2" mid pipe all the way until the muffler? Or should i put an oem resonator in the middle? I've tried 1.75" and i put the oem resonator in the middle, but the acceleration was not good. Then i put off the resonator, so it was 1.75" all the way to muffler. It was better than with the resonator. I thing it's because the porting polish maybe. Is there anyone has done some research about the pipe size with piggyback install? How much hp and torque was it?


Sent from my iPad using Tapatalk

[Rakin]

https://dl.dropboxusercontent.com/u/76588030/2014-10-25%2021.56.11.jpg
Just did a full 2" custom Stainless Steel downpipe with flowmaster 40 series endbox. Removed the cats in the process too since we don't have any emissions testing here whatsoever. OEM resonator. Yes I also did the axle-back section too, forgot to take a photo. :bonk:
It has a very deep tone, but I would like to quiet it down just a little on the low rev range (upto 3000 RPM?), should I put in another resonator or a high-flow cat to town it down? Any suggestions would be appreciated.

[Rakin]

I have 1.5 Yaris m/t. I'm going to install unichip q+, but I'm waiting for the exhaust set up. I've done porting polish, open filter, megan header, lightweight crank pulley. The megan header outlet is 2". What's the best pipe size and exhaust set up? Is 2" mid pipe all the way until the muffler? Or should i put an oem resonator in the middle? I've tried 1.75" and i put the oem resonator in the middle, but the acceleration was not good. Then i put off the resonator, so it was 1.75" all the way to muffler. It was better than with the resonator. I thing it's because the porting polish maybe. Is there anyone has done some research about the pipe size with piggyback install? How much hp and torque was it?


Sent from my iPad using Tapatalk

I have the same engine as you do, I did a full 2" pipe all the way and acceleration was pretty good. Felt decent gains over stock system. I did also remove the cats and put a flowmaster in the process though.

[ryanww]

Thanks Rakin. I will try the 2" pipe.


Sent from my iPad using Tapatalk

[powder puff]

The beginning of my custom exhaust. 2.25" × 12" glass pack and a 3" tailpipe. Next step is to go to exhaust shop and have them fab me up a bend with flange to go over the axle so I can weld it all up. I want it to be bolt on so if me or my wife don't like it I can easily swap back to factory
http://tapatalk.imageshack.com/v2/14/11/20/e4c2e7882193b1405160914fcfd48cd5.jpg
UPDATE: i have everything welded up and put on, will get pics and video next weekend. too dark and windy outside now. plus i still need to take it back off and paint it.

[powder puff]

Got it all welded up and installed, still need to take it back off paint it flat black though. As soon as the video uploads I will post a link
http://tapatalk.imageshack.com/v2/14/11/27/e6c8d7e0f2aa63d40712ccbc62d946e7.jpghttp://tapatalk.imageshack.com/v2/14/11/27/e939f1b2cfeeb36cdefc64cd31a3d339.jpghttp://tapatalk.imageshack.com/v2/14/11/27/6e30a0eec759cf5ff753d13272eda03a.jpg
Video link:
08 yaris glasspack: http://youtu.be/DQW0brSTNmY

[tooter]

Sounds really good for a scratchbuilt system. :thumbsup:

(Your welding looks better than mine... :wink: )


Greg

[powder puff]

Thanks, I'm just a diy guy with no special training with a cheap Flux core welder, lol

[Barneyncp93]

As far as I know, you dont want to have your system move the exhaust slower. So, it's gotta be smaller than most of us can imagine. Smaller diameter is better than bigger, if we have to make a mistake, especially for the street use.

[Ahoysandy]

I've been rolling for about 2 months with no muffler and a custom axle back straight pipe. whilst you get people cracking necks to see what the hell the sound os coming from, it does get annoying in the cabin whilst travelling along the highway. hence i am soon getting a cat back system put back on, haha

[IllusionX]

Are you going with Bosal/Walker? :)

I waiting to receive me HKS axle back...

[MedMantle]

Custom catback Powerflow exhaust.
55331
55332

Soon I'm gonna get a Cat put back in the line simply for Highway drone and smell :brokenheart:

[tooter]

I like that sturdy support for the exhaust tip. :thumbsup:


Greg

[ipwnr]

Scratch build bolt on axleback using another resanator
http://i59.tinypic.com/iedxrt.jpg
Using the stock tip
http://i59.tinypic.com/2ly21d3.jpg
Bird poop welds
http://i57.tinypic.com/zo709w.jpg
This is how it looks from the back
http://i59.tinypic.com/104gp51.jpg

[coheed]

2" straight pipe/ muffler delete. It has more clearance to the bag than it appears to. Made with scraps around the shop with the $90 flux-core Harbor Freight welder.

http://i.imgur.com/K3XiB1R.jpg
http://i.imgur.com/958RQcR.jpg

In car video, audio isn't that great as my camera mount was vibrating and making noise.
https://youtu.be/W4PeHI7ZGmo

0-60/ revving
https://youtu.be/NnYbNGoURN8

[TerenceCruz]

2" straight pipe/ muffler delete. It has more clearance to the bag than it appears to. Made with scraps around the shop with the $90 flux-core Harbor Freight welder.

http://i.imgur.com/K3XiB1R.jpg
http://i.imgur.com/958RQcR.jpg

In car video, audio isn't that great as my camera mount was vibrating and making noise.
https://youtu.be/W4PeHI7ZGmo

0-60/ revving
https://youtu.be/NnYbNGoURN8

Dude.. That sounds great Cory!!:thumbup:

[CanadianYaris]

Im looking for a custom full exhaust for a toyota yaris. I dont want any check engine light to come on. Can I remove one of the cats and the resonator, while installing an OBX Header and Axle Back Exhaust without problems?

[CanadianYaris]

Someone has to know if a custom exhaust will throw CEL codes?!?! ^^

[Black_griffin6]

This is my 2009 Yaris liftback turbo, with a custom cat-back exhaust featuring 2.5" piping, a resonator and secondary cat delete, and a Tanabe muffler at the back.


Let me know what you guys think.

Cold start:
https://www.youtube.com/watch?v=9iv04qB649E

Warmed up:
https://www.youtube.com/watch?v=DYzV3-xBAwc

[Bony_ahmed]

Im thinking of removing the muffler on my 2007 yaris sedan. The engine 1.3L 2nzfe.....is there any drawbacks of doing so. Thanks in advance

[Jerkratt]

Someone has to know if a custom exhaust will throw CEL codes?!?! ^^

If you delete the cat and you just have resonators you're going to have to space out the secondary O2 sensor further away from the pipe to read differently than the one that's in the OBX header. If you go to a good person they should know what to do otherwise you could sort out a spark plug non fouler or I'm sure they sell 02 spacers on eBay

[JessMess]

http://s82.photobucket.com/user/jesse-daniel/media/Mobile%20Uploads/20161114_180245.jpg.html

I did my own muffler delete and wanted to keep as much stock material as possible. This i what i ended up with..

[JessMess]

More pics of my home made muffler delete
http://i82.photobucket.com/albums/j254/jesse-daniel/Mobile%20Uploads/20161114_180629.jpg (http://s82.photobucket.com/user/jesse-daniel/media/Mobile%20Uploads/20161114_180629.jpg.html)

[JessMess]

Made my own muffler delete.. I wanted to keep as much stock material as possible. This is what i came up with..

http://i82.photobucket.com/albums/j254/jesse-daniel/Mobile%20Uploads/20161114_180629.jpg (http://s82.photobucket.com/user/jesse-daniel/media/Mobile%20Uploads/20161114_180629.jpg.html)

[JessMess]

http://i82.photobucket.com/albums/j254/jesse-daniel/Mobile%20Uploads/20161114_180245.jpg (http://s82.photobucket.com/user/jesse-daniel/media/Mobile%20Uploads/20161114_180245.jpg.html)
Here it is with exhaust tip

[paulelhardcore]

Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.

[jackkb1998]

Hi,

I have just done a muffler delete and don't plan on keeping it like this. Are there any pieces I can buy that will be a nice fit or is this something I have to build myself? I can weld pieces from the old muffler to a new exhaust, but am unsure if anyone has had any experience with this.

[thebarber]

Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.

cat and resonator are 2" thru. just have someone fabricate your exhuast at 2" mandrel or 2.25" crush bent from the back end of the resonator to the back of the car.

thats what i did way back when (2.25" crush bent res-axle section with megan axleback muffler) and it was great. really picked up the middle and top end power

[ep123is]

GReddy Revolution RS universal tip installed pretty much just the tip
Here's a demo
Link: https://youtu.be/hoIkA9m2QMY

[ern-diz]

Looks really good, but isn't the muffler there too? Looks like more than just the tip.

[kimona]

Looks really good, but isn't the muffler there too? Looks like more than just the tip.

Yup, looks like the complete super shiny muffler installed there... and the GReddy licence plate frame, too!

[ep123is]

Thank you sorry for the late reply I dont have notifications and im pretty much new here thats why and yeah well when I bought the car it came a exhuast but sounded like crap lol and it was too long so i bought the GReddy took it to someone so they can weld it, it sounded so much better and it sounds aggressive from the inside, so i guess maybe its more than just the tip lol

[06YarisRS]

Here is my Megan axleback installed. The car has to go to an exhaust shop to get everything lined up - muffler needs to be rolled a few degrees clockwise . I also ordered 4 new Walker 35286 insulators/hangers as my old ones were pretty soft and stretched. The axleback is attached to an aftermarket Scion xD midpipe. Considering having the shop run 2.25" pipe from the resonator to the axleback.

Here is a video. Skip to 0:56 if you just want to hear the exhaust.

https://www.youtube.com/watch?v=5Edvs_TSGkY

Pic:

https://i.imgur.com/oiIbIOp.jpg

[Matt Johnson]

Got my side exit welded up for my 2005 RS hatch the other day. 2" 409 stainless with a Magnaflow 10414 muffler and 3.2" x 2.5" oval tip. Just need to fab up the hangers for it now.https://uploads.tapatalk-cdn.com/20190217/e1611aac597c68684ffac403f313ff5e.jpghttps://uploads.tapatalk-cdn.com/20190217/7d0c2d6de8cc39eb6397282dcb0d4f3b.jpghttps://uploads.tapatalk-cdn.com/20190217/a5c28f1ca864efcc5fcb8c964f73b118.jpghttps://uploads.tapatalk-cdn.com/20190217/b377f0c8f3203451de1e50b6eba1f06e.jpghttps://uploads.tapatalk-cdn.com/20190217/f883e201d61d421c6d337dbbceb655cf.jpghttps://uploads.tapatalk-cdn.com/20190217/0c289aa25569f4d695b65ec4dbee866b.jpg

Sent from my SM-A520W using Tapatalk

[Matt Johnson]

First start up before I shortened the system to tuck the tip under the car...

https://youtu.be/2p7t_Xj6qAo

Sent from my SM-A520W using Tapatalk

[KelisDe]

very nice!

[Compeer]

Here my Tanabe medallion g fordan Axle back vid I made right after the install
https://drive.google.com/file/d/1TAtwBC0bovlRSSIJGeSBy6KLn2T19E2L/view?usp=share_link

[Compeer]

I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.
https://cdn.discordapp.com/attachments/955153699561418872/1190308441546301471/Screenshot_2023-12-30_035635.png?ex=65a1541f&is=658edf1f&hm=53ea15db0df18fb024fcdc59604a40bd9778d9b6d4a3c48 1cde8e01edddedc27& https://cdn.discordapp.com/attachments/955153699561418872/1190308484617609216/Screenshot_2023-12-30_035557.png?ex=65a15429&is=658edf29&hm=1f82e750aedf7cd17a7691cd98c899740df33fd478c934a b463c4e8f86a9387b&

https://drive.google.com/file/d/1ePYpubM0gUSujfExYJlejzGKKH-IBkcp/view?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.

[mitch9521]

I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.
https://cdn.discordapp.com/attachments/955153699561418872/1190308441546301471/Screenshot_2023-12-30_035635.png?ex=65a1541f&is=658edf1f&hm=53ea15db0df18fb024fcdc59604a40bd9778d9b6d4a3c48 1cde8e01edddedc27& https://cdn.discordapp.com/attachments/955153699561418872/1190308484617609216/Screenshot_2023-12-30_035557.png?ex=65a15429&is=658edf29&hm=1f82e750aedf7cd17a7691cd98c899740df33fd478c934a b463c4e8f86a9387b&

https://drive.google.com/file/d/1ePYpubM0gUSujfExYJlejzGKKH-IBkcp/view?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.

Modellista Sold a center exhaust and rear bumper lip for the 3rd gen Vitz RS, fairly easy to find.

https://a.d-cd.net/81cea0es-1920.jpg