Motegi RT5 Wheels

[Toddhata]

what do you all think of these?

http://www.motegiracing.com/applicationguide/motegiimages/big/b2023.gif


they look somewhat similar to the TRD 18's but cost less

http://www.toyota.com/images/vehicles/2007/yaris/gallery/exterior/photo_9.jpg


Checking their website application guide, only the 18's show as fitting the yaris, I was thinking more of 16's or 17's, but don't know if they'll fit correctly.

[fnkngrv]

not bad....TRD is all sitting in a little room smoking some major bud cause they want 330 per corner....any cost break to get the look if you like it is worth it in my book.....well to a point anyway.

[Snake]

ive owned 3 sets of those wheels, they are nice
very light and they dont bend easy, very durable wheels
if you like these wheels, contact Andy at wheeldiscounters.com
you can also check his ebay auctions, ebay name is wheeldiscounters
has the best prices on motegi racing, tell him Ara said to call you, he'll take care of you


what do you all think of these?

http://www.motegiracing.com/applicationguide/motegiimages/big/b2023.gif


they look somewhat similar to the TRD 18's but cost less

http://www.toyota.com/images/vehicles/2007/yaris/gallery/exterior/photo_9.jpg


Checking their website application guide, only the 18's show as fitting the yaris, I was thinking more of 16's or 17's, but don't know if they'll fit correctly.

[Ran Kizama]

I like those wheels, but everybody has them here in my area. I ordered some 16x7 Rota Slipstreams for $430 thru a buddy. Every Civic guy here wants them, but nobody has them. (^_^)

Let's see them mounted once you get them in.:thumbsup:

[eight_heads]

yeah i had wanted some slipstreams for my crx... hate to say it because everyone on hondatech wants them too

[Chris07LB]

Go for it Todd, but bronze 'em first... :headbang:

[Toddhata]

here's a bad photoshop job

http://www.toddhata.com/cars/images/motegirt5.jpg

[TRD_Yaris]

man...search ebay with "TRD wheels" and you will find plenty of TRD wheels for the scion xA, echo, JDM cars, etc that will satisfy for much cheaper than $300+ a corner.