|
03-19-2019, 11:59 AM | #1 |
Drives: '03 Echo Join Date: Mar 2019
Location: Idaho
Posts: 2
|
Reassembling left spindle
Hope someone can help with advice as I am struggling. Replaced the cv half shaft, wheel bearing and hub, rotor, and pads on wifes car. Is there an order that the different components are to be reattached to the spindle? I cant seem to get everything lined up (ball joint, tie rod, cv shaft, strut, etc... thanks for any advice on this. jb
|
03-19-2019, 12:13 PM | #2 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Attach the ball joint last. The CV axle can be remove and re installed by simply disconnecting the ball joint and turning the steering wheel. Just be careful not to clip the boot on the CV joint
__________________
No one ever wants to give a Yaris the point by... |
03-19-2019, 04:26 PM | #3 |
Drives: '03 Echo Join Date: Mar 2019
Location: Idaho
Posts: 2
|
another question
this is my first time dealing with suspension parts......but the bottom of the ball joint does not fit evenly in the socket of the arm. Is this acceptable? I think I know why the ball joint is offered with the arm now. thanks, jb
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Left Channel coming out Both Speakers suddenly | MedMantle | In Car Entertainment + Electronics (audio / video / alarm) | 5 | 11-28-2015 07:43 AM |
Left turn noise - coming from right side | tenchsama | DIY / Maintenance / Service | 0 | 07-18-2013 11:37 AM |
Pacquiao vs. Marquez 3 ONGOING NOW | charlieXX | Middle East | 9 | 11-15-2011 12:46 PM |
Miles left in the tank. | Bikerdemon | Fuel Economy Forum | 0 | 10-30-2011 10:04 AM |
Will local bay area members please stand up! | YarisSedan | California | 264 | 07-28-2009 11:53 PM |